Bus pirate

From ArchWiki
Revision as of 07:33, 9 February 2012 by Skydiver (Talk | contribs) (Add i18n template)

Jump to: navigation, search

This template has only maintenance purposes. For linking to local translations please use interlanguage links, see Help:i18n#Interlanguage links.

Local languages: Català – Dansk – English – Español – Esperanto – Hrvatski – Indonesia – Italiano – Lietuviškai – Magyar – Nederlands – Norsk Bokmål – Polski – Português – Slovenský – Česky – Ελληνικά – Български – Русский – Српски – Українська – עברית – العربية – ไทย – 日本語 – 正體中文 – 简体中文 – 한국어

External languages (all articles in these languages should be moved to the external wiki): Deutsch – Français – Română – Suomi – Svenska – Tiếng Việt – Türkçe – فارسی


The Bus Pirate is a versatile tool for communicating with various hardware. All scripts will assume that there is a '/dev/buspirate'.


The drivers for the FTDI chip is included in the kernel, so it should be detected as soon as it's plugged in, and assigned to device /dev/ttyUSB[0-9]. To check where it got assigned, run:

# dmesg | tail

The output will contain a line that looks something like this:

# usb 1-4.4: FTDI USB Serial Device converter now attached to ttyUSB0


It can be annoying to have to look up what /dev/ttyUSB[0-9] the device gets assigned, so it's a good idea to add a simple udev rule that creates the symlink '/dev/buspirate -> /dev/ttyUSB*' when it is plugged in.

First of all, you will need to find out the serial number of FTDI chip on the bus pirate. This can be achieved by running the following, assuming your device is plugged in and was assigned to /dev/ttyUSB0:

# udevadm info --attribute-walk -n /dev/ttyUSB0  | sed -n '/FTDI/,/serial/p'

Now add/create the following file:

SUBSYSTEM=="tty", ATTRS{serial}=="XXXXXXXX", GROUP="users", MODE="0660", SYMLINK+="buspirate"

Change 'ATTRS{serial}=="XXXXXXXX"' to the serial on your device and force udev to load the new rule:

# udevadm control --reload-rules

At this point, whenever you plug in the device, the symlink should be created.


To communicate with the device, you can use any of the following, to name a few:

  • minicom
# minicom -b 115200 -8 -D /dev/buspirate
  • screen
# screen /dev/buspirate 115200 8N1
  • picocom
# picocom -b 115200 -p n -d 8 /dev/buspirate

Type '?' and press enter and the device should reply with a list of possible commands.