Difference between revisions of "CPU frequency scaling"

From ArchWiki
Jump to: navigation, search
(CPU frequency driver)
(CPU frequency driver)
Line 45: Line 45:
 
</nowiki>}}
 
</nowiki>}}
  
The following table is a partial list of available frequency drivers (Adapted from kernel source file {{ic|&lt;kernel source&gt;/arch/x86/kernel/cpu/cpufreq/Kconfig}}).
+
The following table is the output of the above command :
{{Tip|Load the appropriate module
+
{{Tip|Load the appropriate module with {{ic|# modprobe <module>}}. To load the module at boot, run {{# echo <module> > /etc/modules-load.d/<module>}}. The following error message is displayed if it is the wrong module : {{bc|<nowiki>
 +
FATAL: Error inserting <module> ([...]/<module>.ko): No such device
 +
</nowiki>}}}}
 
{| border="1"
 
{| border="1"
 
!Module!!Description
 
!Module!!Description
Line 63: Line 65:
 
|}
 
|}
 
<br>
 
<br>
 
{{Note| Loading the wrong module will result in
 
{{bc|<nowiki>
 
FATAL: Error inserting <module> ([...]/<module>.ko): No such device
 
</nowiki>}}}}
 
 
{{Tip| To load the module automatically at boot {{ic|# echo <module> > /etc/modules-load.d/<module>}}}}
 
Load the appropriate cpu module with {{ic|# modprobe <module>}}.
 
  
 
Once the appropriate cpufreq driver is loaded, detailed information about the CPU(s) can be displayed by running {{ic|cpupower frequency-info}}
 
Once the appropriate cpufreq driver is loaded, detailed information about the CPU(s) can be displayed by running {{ic|cpupower frequency-info}}

Revision as of 02:21, 21 January 2013

Summary help replacing me
An overview of the popular userspace tools for the kernel CPUfreq subsystem.
Related
Laptop Mode Tools
pm-utils
PHC

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: This article needs cleanup as far as kernel cpufreq and userspace cpufrequtils and cpupower are concerned. (Discuss in Talk:CPU frequency scaling#)

cpufreq refers to the kernel infrastructure that implements CPU frequency scaling. This technology enables the operating system to scale the CPU speed up or down in order to save power. CPU frequencies can be scaled automatically depending on the system load, in response to ACPI events, or manually by userspace programs.

Since kernel 3.4 the necessary modules are loaded automatically and the recommended ondemand governor is enabled by default. However, userspace applications like cpupower, acpid, laptop-mode-tools, or GUI tools provided for your desktop environment, may still be used for advanced configuration.

Cpupower

cpupower is a set of userspace utilities designed to assist with CPU frequency scaling. The package is not required to use scaling, but is highly recommended because it provides useful command-line utilities and a service to change the governor at boot.

Configuring Cpu Power Service/Daemon

The configuration file for cpupower is located in /etc/conf.d/cpupower. This configuration file is read by a bash script in /usr/lib/systemd/scripts/cpupower which is activated by systemd with cpupower.service.

Remember to enable the cpupower systemd service to ensure your saved settings work on bootup :

# systemctl enable cpupower.service

CPU frequency driver

Note: As of kernel 3.4; the native cpu frequency drive is loaded automatically

cpupower requires modules to know the limits of the native cpu. To see a full list of available modules, run the following:

$ ls /lib/modules/$(uname -r)/kernel/drivers/cpufreq/

The following table is the output of the above command :

Tip: Load the appropriate module with # modprobe <module>. To load the module at boot, run {{# echo <module> > /etc/modules-load.d/<module>}}. The following error message is displayed if it is the wrong module :
 FATAL: Error inserting <module> ([...]/<module>.ko): No such device
Module Description
acpi_cpufreq CPUFreq driver which utilizes the ACPI Processor Performance States. This driver also supports Intel Enhanced SpeedStep (previously supported by the deprecated speedstep-centrino module).
speedstep-lib CPUFreq drive for Intel speedstep enabled processors (mostly atoms and older pentiums (< 3))
powernow-k8 CPUFreq driver for K8/K10 Athlon64/Opteron/Phenom processors.
cpufreq-nforce2 CPUFreq driver for FSB changing on nVidia nForce2 platforms. (AMD K7, Socket A)
pcc-cpufreq This driver supports Processor Clocking Control interface by Hewlett-Packard and Microsoft Corporation which is useful on some Proliant servers.
p4_clockmod CPUFreq driver for Intel Pentium 4 / Xeon / Celeron processors. When enabled it will lower CPU temperature by skipping clocks.
You probably want to use a Speedstep driver instead.


Once the appropriate cpufreq driver is loaded, detailed information about the CPU(s) can be displayed by running cpupower frequency-info

Scaling governors

Governors can be thought of as pre-configured power schemes for the CPU. One may load as many governors as desired (only one will be active on a CPU at any given time). All governors must be loaded and only one may be active on a cpu at any given time.

Available governors:

Note: The kernel loads the governor : on_demand by default.
cpufreq_ondemand (default and recommended)
Dynamically switches between the CPU(s) available clock speeds based on system load
cpufreq_performance
The performance governor runs the CPU(s) at maximum clock speed
cpufreq_conservative
Similar to ondemand, but the CPU(s) clock speed switches gradually through all its available frequencies based on system load
cpufreq_powersave
Runs the CPU(s) at minimum speed
cpufreq_userspace
Manually configured clock speeds by user
Tip: Run $ watch grep \"cpu MHz\" /proc/cpuinfo to monitor cpu speed in real time

With cpupower

To load and activate a particular governor, one should run # cpupower frequency-set -g <governor Run cpupower --help or man cpupower for more information.

Without cpupower

Tip: To load a governor at boot, run # echo <module> > /etc/modules-load.d/<module>

To load a particular governor, one should run # modprobe <governor> Or, add a file specifying the desired governor(s) to /etc/modules-load.d/ and reboot.

Tuning Governors

Tip: Add the following commands below to /etc/conf.d/cpupower. <percent> is the percentage of cpu load; <governor> is the cpupower governor

To set the threshold for stepping up to another frequency

echo -n <percent> > /sys/devices/system/cpu/cpufreq/<governor>/up_threshold

To set the threshold for stepping down to another frequency

echo -n <percent> > /sys/devices/system/cpu/cpufreq/<governor>/down_threshold

Setting Maximum and Minimum Frequencies

Note: The governor, maximum, and minimum frequencies can be set in /etc/conf.d/cpupower. To adjust for only a single cpu core: -c <core #>. <clock_freq> is a clock frequency with units : GHz,MHz

To set the maximum clock frequency

cpupower frequency-set -u <clock_freq>

To set the minimum clock frequency

cpupower frequency-set -d <clock_freq>

To set the cpu to run at a specified frequency

cpupower frequency-set -f <clock_freq>


On-demand governor sampling_down_factor

sampling_down_factor is another global ondemand global tunable.

Having sampling_down_factor set to 1 makes no changes from existing behavior, but having sampling_down_factor set to a value greater than 1 (e.g. 100) causes it to act as a multiplier for the scheduling interval for re-evaluating load when the CPU is at its highest clock frequency due to high load. This improves performance by reducing the overhead of load evaluation and helping the CPU stay at its highest clock frequency when it is truly busy, rather than shifting back and forth in speed. This tunable has no effect on behavior at lower frequencies/lower CPU loads.

Read the value (default: 1):

# cat /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor

Set the value:

# echo -n 10 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor

Interaction with ACPI events

Users may configure scaling governors to switch automatically based on different ACPI events such as connecting the AC adapter or closing a laptop lid. A quick example is given below, however it may be worth reading full article on acpid.

Events are defined in /etc/acpi/handler.sh. If the acpid package is installed, the file should already exist and be executable. For example, to change the scaling governor from performance to conservative when the AC adapter is disconnected and change it back if reconnected:

/etc/acpi/handler.sh
[...]

 ac_adapter)
     case "$2" in
         AC*)
             case "$4" in
                 00000000)
                     echo "conservative" >/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor    
                     echo -n $minspeed >$setspeed
                     #/etc/laptop-mode/laptop-mode start
                 ;;
                 00000001)
                     echo "performance" >/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
                     echo -n $maxspeed >$setspeed
                     #/etc/laptop-mode/laptop-mode stop
                 ;;
             esac
         ;;
         *) logger "ACPI action undefined: $2" ;;
     esac
 ;;

[...]


Privilege Granting Under GNOME

Note: Systemd introduced logind which handles consolekit and policykit actions. The following code below does not work

GNOME has a nice applet to change the governor on the fly. To use it without the need to enter the root password, simply create /var/lib/polkit-1/localauthority/50-local.d/org.gnome.cpufreqselector.pkla and populate it with the following:

[org.gnome.cpufreqselector]
Identity=unix-user:USER
Action=org.gnome.cpufreqselector
ResultAny=no
ResultInactive=no
ResultActive=yes
0

Where the word USER is replaced with the username of interest.

The desktop-privilegesAUR package in the AUR contains a similar .pkla file for authorizing all users of the power group to change the governor.

Laptop Mode Tools

If you are already using or plan to use Laptop Mode Tools for other power saving solutions, then you may want to let it also manage CPU frequency scaling. To do so, you just have to insert the appropriate frequency driver to the /etc/modules.d/ directory. (see #CPU frequency driver above) and then go through the /etc/laptop-mode/conf.d/cpufreq.conf file to define governors, frequencies and policies. You will not need to load other modules and daemons or to set up scaling governors and interaction with ACPI events. Please refer to Laptop Mode Tools for more details.

Troubleshooting

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: please use the first argument of the template to provide a brief explanation. (Discuss in Talk:CPU frequency scaling#)
  • Some applications, like ntop, do not respond well to automatic frequency scaling. In the case of ntop it can result in segmentation faults and lots of lost information as even the on-demand governor cannot change the frequency quickly enough when a lot of packets suddenly arrive at the monitored network interface that cannot be handled by the current processor speed.
  • Some CPU's may suffer from poor performance with the default settings of the on-demand governor (e.g. flash videos not playing smoothly or stuttering window animations). Instead of completely disabling frequency scaling to resolve these issues, the aggressiveness of frequency scaling can be increased by lowering the up_threshold sysctl variable for each CPU. See #Changing the on-demand governor's threshold.
  • Sometimes the on-demand governor may not throttle to the maximum frequency but one step below. This can be solved by setting max_freq value slightly higher than the real maximum. For example, if frequency range of the CPU is from 2.00 GHz to 3.00 GHz, setting max_freq to 3.01 GHz can be a good idea.
  • Some combinations of ALSA drivers and sound chips may cause audio skipping as the governor changes between frequencies, switching back to a non-changing governor seems to stop the audio skipping.

BIOS frequency limitation

Some CPU/BIOS configurations may have difficulties to scale to the maximum frequency or scale to higher frequencies at all. This is most likely caused by BIOS events telling the OS to limit the frequency resulting in /sys/devices/system/cpu/cpu0/cpufreq/bios_limit set to a lower value.

Either you just made a specific Setting in the BIOS Setup Utility, (Frequency, Thermal Management, etc.) you can blame a buggy/outdated BIOS or the BIOS might have a serious reason for throttling the CPU on it's own.

Reasons like that can be (assuming your machine's a notebook) that the battery is removed (or near death) so you're on AC-power only. In this case a weak AC-source might not supply enough electricity to fulfill extreme peak demands by the overall system and as there is no battery to assist this could lead to data loss, data corruption or in worst case even hardware damage!

Not all BIOS'es limit the CPU-Frequency in this case, but for example most IBM/Lenove Thinkpads do. Refer to thinkwiki for more thinkpad related info on this topic.

If you checked there's not just an odd BIOS setting and you know what you're doing you can make the Kernel ignore these BIOS-limitations.

Warning: Make sure you read and understood the section above. CPU frequency limitation is a safety feature of your BIOS and you should not need to work around it.

A special parameter has to be passed to the processor module.

For trying this temporarily change the value in /sys/module/processor/parameters/ignore_ppc from 0 to 1.

For setting it permanent refer to Kernel modules or just read on. Add processor.ignore_ppc=1 to your kernel boot line or create

/etc/modprobe.d/ignore_ppc.conf
# If the frequency of your machine gets wrongly limited by BIOS, this should help
options processor ignore_ppc=1