From ArchWiki
Jump to navigation Jump to search

zh-CN:CUPS zh-TW:CUPS Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary end

From CUPS' site:

"CUPS is the standards-based, open source printing system developed by Apple Inc. for Mac OS® X and other UNIX®-like operating systems".

Although there are other printing packages such as LPRNG, the Common Unix Printing System is the most popular choice because of its relative ease of use.


Cups Linux Printing workflow

As of version cups 1.5.3-3 ArchLinux makes use of the new full pdf-based printing workflow. For further reading check PDF standard printing job format and an old Cups filtering chart for history and fun. A good starting point for general Linux printing questions is here.

There are two ways to setup a printer:

  • If there's a linux cups server running in your network and sharing a printer you only need to install the client package.
  • The printer is connected directly to your system or you have access to an IPP network printer then setup a local cups server

Installing the client package

the recommended simple setup

  • libcups is the only package you need to Install

Then add your cups server IP or hostname into /etc/cups/client.conf. That's all you need. Every application should quickly find the printer(s) shared by that cups server.

optional advanced network setup

  • You can run a cupsd instance on your client with avahi browsing enabled to discover unknown shared printers in your network. This is not recommended in simple home network setups where you usually know your printer server IP or hostname! This makes only sense in large setups where the server is unknown.
Note: This behavior has not been changed with cups 1.6.x - the difference is that until 1.5.x cupsd was able to do printer browsing alone and now needs avahi to discover unknown printers!

Installing the server packages

The packages cups, cups-filters, ghostscript, gsfonts and some printer driver are needed. Install them from the Official repositories.

  • cups - The actual CUPS software(daemon)
  • avahi - to make your printers browsable through your network
  • cups-filters - essential filter pkg
  • ghostscript - (optional) Interpreter for the Postscript language
  • gsfonts - GhostScript standard Type1 fonts
  • hpoj - If you are using an HP Officejet, you should also install this package and follow the instructions to avoid problems. Read this thread at launchpad/hplip for more information.

If the system is connected to a networked printer using the Samba protocol or if the system is to be a print server for Windows clients, also install samba.

Note: As of cups version 1.6 the avahi-daemon should be runnig before cupsd is started if you want to enable printer browsing through your network. Your rc.conf daemon line should look like: "...dbus...avahi-daemon cupsd...". However you don't need to run avahi on your client system if you know the server IP or network name. See client configuration above.

Printer driver

Here are some of the driver packages. Choosing the right driver depends on the printer:

  • gutenprint - A collection of high quality drivers for Canon, Epson, Lexmark, Sony, Olympus, and PCL printers for use with GhostSscript, CUPS, Foomatic, and the GIMP
  • foomatic-db, foomatic-db-engine, foomatic-db-nonfree, and foomatic-filters - Foomatic is a database-driven system for integrating free software printer drivers with common spoolers under Unix. Installing foomatic-filters should solve problems if the cups error_log is reporting "stopped with status 22!".
  • foo2zjsAUR - Drivers for ZjStream protocol printers such as the HP Laserjet 1018. More info here, Foo2zsj is available in the foo2zjsAUR.
  • hplip - HP GNU/Linux driver. Provides support for DeskJet, OfficeJet, Photosmart, Business Inkjet and some LaserJet printer models, as well as a number of Brother printers.
  • splix - Samsung drivers for SPL (Samsung Printer Language) printers
  • samsung-unified-driverAUR - Unified Linux Driver for Samsung printers and scanners. Required for new printers, like ML-2160. Package is available in the AUR.
  • ufr2AUR or cndrvcups-lbAUR - Canon UFR2 driver with support for LBP, iR and MF series printers. Package is available in the AUR.
  • cups-pdf - A package that allows one to setup a virtual PDF Printer that generates a PDF out of jobs sent to it

If you are not sure of what driver package to install or if the current driver is not working, it may be easiest to just install all of the drivers. Some of the package names are misleading because printers of other makes may rely on them. For example, the Brother HL-2140 needs the hplip driver installed.

Download printer PPD

Depending on the printer, this step is optional and may not be needed, as the standard CUPS installation already comes with quite a few PPD (Postscript Printer Description) files. Moreover, the foomatic-filters, gimp-print and hplip packages already include quite a few PPD files which will automatically be detected by CUPS.

Here is an explanation of what a PPD file is from the Linux Printing website:

"For every PostScript printer the manufacturers provide a PPD file which contains all printer-specific information about the particular printer model: Basic printer capabilities as whether the printer is a color printer, fonts, PostScript level, etc., and especially the user-adjustable options, as paper size, resolution, etc."

If the PPD for the printer is not already in CUPS, then:

  • check AUR to see if there are packages for the printer/manufacturer
  • visit the OpenPrinting database and select the manufacturer and model of the printer
  • visit the manufacturer's site and search for GNU/Linux drivers
Note: PPD files go in /usr/share/cups/model/


Now that CUPS is installed, there are a variety of options on how to setup printing solutions. As always, the tried and true command line method is at your disposal. Likewise, various desktop environments such as GNOME and KDE have useful programs that can help manage printers. However, in order to make this process easy for the largest amount of users, this article will focus on the web interface provided by CUPS.

If you are planning on connecting to a network printer, rather than one that is directly connected to the computer, you might want to read the CUPS printer sharing page first. Printer sharing between GNU/Linux systems is quite easy and involves very little configuration, whereas sharing between a Windows and GNU/Linux host requires a little bit more effort.

USB printers can get accessed with two methods: The usblp kernel module and libusb. The former is the classic way. It is simple: Data is sent to the printer by writing it to a device file as a simple serial data stream. Reading the same device file allows bi-di access, at least for things like reading out ink levels, status, or printer capability information (PJL). It works very well for simple printers, but for multi-function devices (printer/scanner) it is not suitable and manufacturers like HP supply their own backends. (source: here)

Kernel modules

Before using the CUPS web interface, the appropriate kernel modules need to be installed. The following steps are from the Gentoo Printing Guide.

This section may not be necessary, however, depending on which kernel is being used. The kernel module may load automatically after plugging in the printer. Use the tail command (described below) to see if the printer has already been detected. The lsmod utility can also be used to see what modules have been loaded.

USB printers

As of Cups version 1.6.0 it's typically no more needed to blacklist the usblp kernel module! If you find out this is the only way to fix a remaining issue please report this upstream to the cups tracker and maybe also get in contact with Till Kamppeter (Debian cups maintainer). See upstream bug for more.

Some USB printer users may want to try if blacklisting the usblp module would help:

blacklist usblp

Custom kernel users may need to manually load the usbcore module before proceeding:

# modprobe usbcore

Once the modules are installed, plug in the printer and check if the kernel detected it by running the following:

# tail /var/log/messages.log


# dmesg

If you're using usblp, the output should indicate that the printer has been detected like so:

Feb 19 20:17:11 kernel: printer.c: usblp0: USB Bidirectional
printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
Feb 19 20:17:11 kernel: usb.c: usblp driver claimed interface cfef3920
Feb 19 20:17:11 kernel: printer.c: v0.13: USB Printer Device Class driver

If you blacklisted usblp, you will see something like:

usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice

Parallel port printers

To use a parallel port printer the configuration is pretty much the same, except for the modules:

# modprobe lp
# modprobe parport
# modprobe parport_pc

Once again, check the setup by running:

# tail /var/log/messages.log

It should display something like this:

lp0: using parport0 (polling).

If you are using a USB to parallel port adapter, CUPS will not be able to detect the printer. As a workaround, add the printer using a different connection type and then change DeviceID in /etc/cups/printers.conf:

DeviceID = parallel:/dev/usb/lp0


It is convenient to have the system automatically load the kernel module every time it starts up. To do so, use a text editor to open up /etc/modules-load.d/printing.conf and add the appropriate modules one per line. Here is an example:


CUPS daemon

With the kernel modules installed, you can now start the cupsd daemon. Add cupsd to your DAEMONS array so it starts automatically on boot.

Web interface and tool-kit

Once the daemon is running, open a browser and go to: http://localhost:631 (The localhost string may need to be replaced with the hostname found in /etc/hosts).

From here, follow the various wizards to add the printer. A usual procedure is to start by clicking on Adding Printers and Classes and then Add Printer. When prompted for a username and password, log in as root. The name assigned to the printer does not matter, the same applies for 'location' and 'description'. Next, a list of devices to select from will be presented. The actual name of the printer shows up next to the label ( e.g., next to USB Printer #1 for USB printers). Finally, choose the appropriate drivers and the configuration is complete.

Now test the configuration by pressing the Maintenance drop-down menu then Print Test Page. If it does not print and there is certainty regarding the correctness of applied settings, then the problem is most likely due to missing a proper printer driver.

Tip: See: #Alternative CUPS interfaces for other other frontends.
Note: When setting up a USB printer, you should see your printer listed on Add Printer page. If you can only see a "SCSI printer" option, it probably means that CUPS has failed to recognize your printer.
Note: To enable wireless scanning on certain HP multifunction devices using the hplip package, you may need to add the printer as a Network Printer using the http:// protocol. To determine the proper URI to use, run the hp-makeuri command.

CUPS administration

A username and password will be required when administering the printer in the web interface, such as: adding or removing printers, stopping print tasks, etc. The default username is the one assigned in the sys group, or root (change this by editing /etc/cups/cupsd.conf in the line of SystemGroup).

If the root account has been locked (i.e. when using sudo), it is not possible to log in the CUPS administration interface with the default username and password. In this case, follow these instructions on the CUPS FAQ. You might also want to read this post.

Remote access to web interface

By default, the CUPS web interface can only be accessed by the localhost; i.e. the computer that it is installed on. To remotely access the interface, make the following changes to the /etc/cups/cupsd.conf file. Replace the line:

Listen localhost:631


Port 631

so that CUPS listens to incoming requests.

Three levels of access can be granted:

<Location />           #access to the server
<Location /admin>	#access to the admin pages
<Location /admin/conf>	#access to configuration files

To give remote hosts access to one of these levels, add an Allow statement to that level's section. An Allow statement can take one or more of the forms listed below:

Allow all
Allow *
Allow ip-address
Allow ip-address/netmask

Deny statements can also be used. For example, if wanting to give all hosts on the subnet full access, file /etc/cups/cupsd.conf would include this:

# Restrict access to the server...
# By default only localhost connections are possible
<Location />
   Order allow,deny
   Allow From localhost
   Allow From

# Restrict access to the admin pages...
<Location /admin>
   # Encryption disabled by default
   #Encryption Required
   Order allow,deny
   Allow From localhost
   Allow From

# Restrict access to configuration files...
<Location /admin/conf>
   AuthType Basic
   Require user @SYSTEM
   Order allow,deny
   Allow From localhost
   Allow From

You might also need to add:

DefaultEncryption Never

This should avoid the error: 426 - Upgrade Required when using the CUPS web interface from a remote machine.


The best way to get printing working is to set 'LogLevel' in /etc/cups/cupsd.conf to:

LogLevel debug

And then viewing the output from /var/log/cups/error_log like this:

# tail -n 100 -f /var/log/cups/error_log

The characters at the left of the output stand for:

  • D=Debug
  • E=Error
  • I=Information
  • And so on

These files may also prove useful:

  • /var/log/cups/page_log - Echoes a new entry each time a print is successful
  • /var/log/cups/access_log - Lists all cupsd http1.1 server activity

Of course, it is important to know how CUPS works if wanting to solve related issues:

  1. An application sends a .ps file (PostScript, a script language that details how the page will look) to CUPS when 'print' has been selected (this is the case with most programs).
  2. CUPS then looks at the printer's PPD file (printer description file) and figures out what filters it needs to use to convert the .ps file to a language that the printer understands (like PJL, PCL), usually GhostScript.
  3. GhostScript takes the input and figures out which filters it should use, then applies them and converts the .ps file to a format understood by the printer.
  4. Then it is sent to the back-end. For example, if the printer is connected to a USB port, it uses the USB back-end.

Print a document and watch error_log to get a more detailed and correct image of the printing process.

Problems resulting from upgrades

Issues that appeared after CUPS and related program packages underwent a version increment

CUPS stops working

The chances are that a new configuration file is needed for the new version to work properly. Messages such as "404 - page not found" may result from trying to manage CUPS via localhost:631, for example.

To use the new configuration, copy /etc/cups/cupsd.conf.default to /etc/cups/cupsd.conf (backup the old configuration if needed):

# cp /etc/cups/cupsd.conf.default /etc/cups/cupsd.conf

and restart CUPS to employ the new settings.

All jobs are "stopped"

If all jobs sent to the printer become "stopped", delete the printer and add it again. Using the CUPS web interface, go to Printers > Delete Printer.

To check the printer's settings go to Printers, then Modify Printer. Copy down the information displayed, click 'Modify Printer' to proceed to the next page(s), and so on.

All jobs are "The printer is not responding"

On networked printers, you should check that the name that CUPS uses as its connection URI resolves to the printer's IP via DNS, e.g. If your printer's connection looks like this:


then the hostname 'BRN_020554' needs to resolve to the printer's IP from the server running CUPS

The PPD version is not compatible with gutenprint


# /usr/sbin/cups-genppdupdate

And restart CUPS (as pointed out in gutenprint's post-install message)

USB printers under CUPS 1.4.x

New CUPS 1.4.x introduces many changes:

Device node permissions

Some device may not be set with proper permission, escpecially when you blacklist the usblp module (no more needed as of cups version 1.6.x). CUPS needs the ownership of the USB device file of the printer to be root:lp, and permissions to be 660, e.g.

$ ls -l /dev/bus/usb/003/002
crw-rw---- 1 root lp 189, 257 20. Okt 10:32 /dev/bus/usb/003/002

This is supposed to be achieved by two udev rules in /lib/udev/rules.d/50-udev-default.rules:

# hplip and cups 1.4+ use raw USB devices, so permissions should be similar to
# the ones from the old usblp kernel module
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="", IMPORT{program}="usb_id --export %p"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}==":0701*:", GROUP="lp", MODE="660"

However, for some devices, in particular combined printer/scanner devices, these rules either do not trigger, or are overwritten by rules of the 'sane' package. In these cases a custom udev rule needs to be added. See below.

Device node permission troubleshooting

Get the printer's device file and its permissions with:

$ lsusb
Bus 003 Device 002: ID 04b8:0841 Seiko Epson Corp.
$ ls -l /dev/bus/usb/003/002
crw-rw---- 1 root lp 189, 257 20. Okt 10:32 /dev/bus/usb/003/002

If the permissions are not already root:lp 660, enforce it by creating a custom udev rule, e.g.

cat /etc/udev/rules.d/10-usbprinter.rules
ATTR{idVendor}=="04b8", ATTR{idProduct}=="0841", MODE:="0660", GROUP:="lp"

If you have a multifunction device (printer+scanner) you need to make the device detectable to sane too

cat /etc/udev/rules.d/10-usbprinter.rules
ATTR{idVendor}=="04b8", ATTR{idProduct}=="0841", MODE:="0660", GROUP:="lp", ENV{libsane_matched}:="yes"
  • idVendor and idProduct are from the lsusb listing above.
  • some printers will need permissions to be 666
  • on my machine the propper folder is /usr/lib/udev/rules.d
Loading firmware

Some printers and drivers need to load firmware to the printer (such as HP LaserJet 10xx printers using foo2zjs) and do this by writing directly to the lp device, a functionality provided by usblp. A work around until this issue is resolved is to install the usblp module until the firmware is loaded, then remove the module to allow CUPS to work. This can be accomplished by manually running "$ modprobe usblp", waiting for the firmware to load, then "$ rmmod usblp". You can also not blacklist usblp, then put "rmmod usblp" to /etc/rc.local, allowing the firmware to be loaded on boot before rc.local is run, then removing usblp.

In case the printer is plugged in or powered on while system is already running, /etc/rc.local does not get executed and usblp module stays loaded. A workaround is to modify the /etc/udev/rules.d/11-hpj10xx.rules provided by foo2zjs so that after the add event we wait, e.g. 15 seconds for the firmware to load and then automatically remove usblp. The following example is for HP LaserJet 1018. For other models the value of ATTRS{idProduct} should be changed to match the printer model.

Locate the line matching your printer in /etc/udev/rules.d/11-hpj10xx.rules:

ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0",     \
       ATTRS{idProduct}=="4117", RUN+="/sbin/foo2zjs-loadfw 1018 $tempnode"

Add the following lines below it, make sure match the product and vendor IDs:

ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0",     \
       ATTRS{idProduct}=="4117", RUN+="/usr/bin/sleep 15"
ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0",     \
       ATTRS{idProduct}=="4117", RUN+="/usr/bin/rmmod usblp"

Update: these modifications are not needed using foo2zjs>=20120519-2 AUR package as the /etc/udev/rules.d/11-hpj10xx.rules is already patched!!!


CUPS permission errors
  • Some users fixed 'NT_STATUS_ACCESS_DENIED' (Windows clients) errors by using a slightly different syntax:
  • Sometimes, the block device has wrong permissions:
# ls /dev/usb/
# chgrp lp /dev/usb/lp0

HPLIP printer sends "/usr/lib/cups/backend/hp failed" error

Make sure dbus is installed and running, e.g. check DAEMONS in /etc/rc.conf or run ls /var/run/daemons.

The avahi-daemon might be required if this error persists and the dbus is already running.

Try adding the printer as a Network Printer using the http:// protocol. Generate the printer URI with hp-makeuri.

Note: There might need to set permissions issues right. Follow indications here: CUPS#Device_node_permissions.

HPLIP printer claims job is complete but printer does nothing

This happens on hp printers when you select the (old) hpijs driver (e.g. the Deskjet D1600 series). Instead, use the hpcups driver when adding the printer.

hp-toolbox sends an error, "Unable to communicate with device"

If running hp-toolbox as a regular user results in:

# hp-toolbox
# error: Unable to communicate with device (code=12): hp:/usb/<printer id>

or, "Unable to communicate with device"", then it may be needed to add the user to the lp group.

This can also be caused by printers such as the P1102 that provide a virtual cd-rom drive for MS-Windows drivers. The lp dev appears and then disappears. In that case try the usb-modeswitch and usb-modeswitch-data packages, that lets one switch off the "Smart Drive" (udev rules included in said packages).

This can also occur with network attached printers if the avahi-daemon is not running.

CUPS returns '"foomatic-rip" not available/stopped with status 3' with a HP printer

If receiving any of the following error messages in /var/log/cups/error_log while using a HP printer, with jobs appearing to be processed while they all end up not being completed with their status set to 'stopped':

Filter "foomatic-rip" for printer "<printer_name>" not available: No such file or director


PID 5771 (/usr/lib/cups/filter/foomatic-rip) stopped with status 3!

make sure hplip has been installed, in addition to the packages mentioned above, net-snmp is also needed. See this forum post.

# pacman -S hplip

Printing fails with unauthorised error

If the user has been added to the lp group, and allowed to print (set in cupsd.conf), then the problem lies in /etc/cups/printers.conf. This line could be the culprit:

AuthInfoRequired negotiate

Comment it out and restart CUPS.

Print button greyed-out in GNOME print dialogs

Source: I can't print from gnome applications. - Arch Forums

Be sure the package: libgnomeprint is installed

Edit /etc/cups/cupsd.conf and add

# HostNameLookups Double

Restart CUPS:

# /etc/rc.d/cupsd restart

Unknown supported format: application/postscript

Comment the lines:

application/octet-stream        application/vnd.cups-raw        0      -

from /etc/cups/mime.convs, and:


in /etc/cups/mime.types.

Finding URIs for Windows Print Servers

Sometimes Windows is a little less than forthcoming about exact device URIs (device locations). If having trouble specifying the correct device location in CUPS, run the following command to list all shares available to a certain windows username:

$ smbtree -U windowsusername

This will list every share available to a certain Windows username on the local area network subnet, as long as Samba is set up and running properly. It should return something like this:

		\\REGULATOR-PC\print$         	Printer Drivers
		\\REGULATOR-PC\EPSON Stylus CX8400 Series	EPSON Stylus CX8400 Series

What is needed here is first part of the last line, the resource matching the printer description. So to print to the EPSON Stylus printer, one would enter:

smb://username.password@REGULATOR-PC/EPSON Stylus CX8400 Series

as the URI into CUPS. Notice that whitespaces are allowed in URIs, whereas backslashes get replaced with forward slashes.

Print-Job client-error-document-format-not-supported

Try installing the foomatic packages and use a foomatic driver.

/usr/lib/cups/backend/hp failed


 SystemGroup sys root


 SystemGroup lp root

in /etc/cups/cupsd.conf

Following steps 1-3 in the Alternative CUPS interfaces below may be a better solution, since newer versions of cups will not allow the same group for both normal and admin operation.

"Unable to get list of printer drivers"

Try to remove Foomatic drivers.


Alternative CUPS interfaces

If using GNOME, a possibility is to manage and configure the printer by using system-config-printer-gnome. This package is available through pacman:

# pacman -S system-config-printer-gnome

For system-config-printer to work as it should, running as root may be required, or alternatively set up a "normal" user to administer CUPS (if so follow steps 1-3)

  • 1. Create group, and add a user to it
# groupadd lpadmin
# usermod -aG lpadmin <username>
  • 2. Add "lpadmin" (without the quotes) to this line in /etc/cups/cupsd.conf
SystemGroup sys root <insert here>
  • 3. Restart cups, log out and in again (or restart computer)
# rc.d restart cupsd

KDE users can modify their printers from the Control Center. Both should refer to those desktop environments' documentation for more information on how to use the interfaces.

There is also gtklp in the AUR

PDF virtual printer

CUPS-PDF is a nice package that allows one to setup a virtual printer that will generate a PDF from anything sent to it. Obviously this package is not necessary, but it can be quite useful.

Find generated PDF documents in a sub-directory located at /var/spool/cups-pdf. Normally, the subdirectory is named after the user who performed the job. A little tweak helps you to find your printed PDF documents more easily. Edit /etc/cups/cups-pdf.conf by changing the line

#Out /var/spool/cups-pdf/${USER}


Out /home/${USER}

This package can be installed by the following command:

# pacman -S cups-pdf

After installing the package, set it up as if it were for any other printer by using the web interface. For the Device, select CUPS-PDF (Virtual PDF Printer); Make/Manufacturer, choose Generic; Model/Driver, select Generic postscript color printer or Generic Cups-PDF Printer. Alternatively, provide the PPD file from this link.

Print to postscript: CUPS-PDF virtual printer trick

Printing to PDF in most applications like OpenOffice is no problem; just hit the button. Yet when printing out to postscript, matters take a little more work. For applications like OpenOffice where printing to kprinter is nebulous at best, there has to be another way -- and there is. The CUPS-PDF (Virtual PDF Printer) actually creates a postscript file and then creates the PDF using the ps2pdf utility. To print to postscript, what needs to be done is capturing the intermediate postscript file created by CUPS-PDF. This is easily accomplished with by selecting the "print to file" option in the print dialog. (choose either .ps or .eps as the extension) After selecting the "print to file" checkbox simply enter the filename and click "print".

Configuring CUPS-PDF virtual printer
  1. Set up the cups daemon using the instructions on this page.
  2. Install cups-pdf from [extra].
  3. Access the cups print manager: http://localhost:631 and select:
Administration -> Add Printer
Select CUPS-PDF (Virtual PDF), choose for the make and driver:
Make:	Generic
Driver:	Generic CUPS-PDF Printer

Now to print to postscript, just print as usual, in the print dialog choose "CUPS-PDF" as the printer, then select the checkbox for "print to file", hit print, enter the and click save. This is handy for faxes, etc...

Another source for printer drivers

Turboprint is a proprietary driver for many printers not yet supported by GNU/Linux (Canon i*, for example). Unlike CUPS, however, high quality prints are either marked with a watermark or are a pay-only service.

See also