Difference between revisions of "Change root"

From ArchWiki
Jump to: navigation, search
Line 129: Line 129:
mkdir myroot
mkdir myroot
sudo pacman -i arch-install-scripts
sudo pacman -S arch-install-scripts
sudo mount --bind myroot myroot # pacstrap must see myroot as mounted  
sudo mount --bind myroot myroot # pacstrap must see myroot as mounted  
sudo pacstrap -i myroot base base-devel
sudo pacstrap -i myroot base base-devel

Revision as of 10:04, 11 February 2013

zh-CN:Change Root Chroot is the process of changing of the apparent disk root directory (and the current running process and its children) to another root directory. When you change root to another directory you cannot access files and commands outside that directory. This directory is called a chroot jail. Changing root is commonly done for system maintenance, such as reinstalling the bootloader or resetting a forgotten password.


  • You'll need to boot from another working Linux environment (e.g. from a LiveCD or USB flash media, or from another installed Linux distribution).
  • Root privileges are required in order to chroot.
  • Be sure that the architecture of the Linux environment you have booted into matches the architecture of the root directory you wish to enter (i.e. i686, x86_64). You can find the architecture of your current environment with:
uname -m
  • If you need any kernel modules loaded in the chroot environment, load them before chrooting. It may also be useful to initialize your swap (swapon /dev/sdxY) and to establish an internet connection before chrooting.

Mount the partitions

The root partition of the Linux system that you're trying to chroot into needs to be mounted first. To find out the device name assigned by the kernel, run:

lsblk /dev/sda

You can also run the following to get an idea of your partition layout.

fdisk -l

Now create a directory where you would like to mount the root partition and mount it:

mkdir /mnt/arch
mount /dev/sda3 /mnt/arch

Next, if you have separate partitions for other parts of your system (e.g. /boot, /home, /var, etc), you should mount them, as well:

mount /dev/sda1 /mnt/arch/boot/
mount /dev/sdb5 /mnt/arch/home/
mount ...

While it's possible to mount filesystems after you've chrooted, it is more convenient to do so beforehand. The reasoning for this is that you'll have to unmount the temporary filesystems after you exit the chroot, so this lets you umount all the filesystems with a single command. This also allows for a safer shutdown. Because the external Linux environment knows all mounted partitions, it can safely unmount them during shutdown.

Change root

Mount the temporary filesystems as root:

Note: Using a newer (2012) Arch release, the following commands can be replaced with arch-chroot /mnt/arch. You must have arch-install-scripts installed to run arch-chroot. The following commands may still be used if you're using a different Linux distribution.
cd /mnt/arch
mount -t proc proc proc/
mount -t sysfs sys sys/
mount -o bind /dev dev/
mount -t devpts pts dev/pts/

If you have established an internet connection and want to use it in the chroot environment, you may have to copy over your DNS configuration to be able to resolve hostnames.

cp -L /etc/resolv.conf etc/resolv.conf

Now chroot into your installed system and define your shell:

chroot /mnt/arch /bin/bash
Note: If you see the error chroot: cannot run command '/bin/bash': Exec format error, it is likely that the two architectures do not match.

Optionally, to source your Bash configuration (~/.bashrc and /etc/bash.bashrc), run:

source ~/.bashrc
source /etc/profile

Optionally, create a unique prompt to be able to differentiate your chroot environment:

export PS1="(chroot) $PS1"

Run graphical chrooted applications

If you have X running on your system, you can start graphical applications from the chroot environment.

To allow the connection to your X server, you have to run the following from a terminal:

xhost +

Then, to direct the applications to your X server, run:

export DISPLAY=:0.0

Perform system maintenance

At this point you can perform whatever system maintenance you require inside the chroot environment. A few common examples are:

Exit the chroot environment

When you're finished with system maintenance, exit the chroot:


Then unmount the temporary filesystems and any mounted devices:

umount {proc,sys,dev,boot,[...],}

Finally, attempt to unmount your root partition:

cd ..
umount arch/
Note: If you get an error saying that /mnt (or any other partition) is busy, this can mean one of two things:
  • A program was left running inside of the chroot.
  • Or, more frequently, a sub-mount still exists (e.g. /mnt/arch/boot within /mnt/arch). Check with lsblk to see if there are any mountpoints left:
lsblk /dev/sda
If you are still unable to unmount a partition, use the --force option:
umount -f /mnt

After this, you will be able to safely reboot.


This may protect your system from Internet attacks during browsing:

mkdir myroot
sudo pacman -S arch-install-scripts
sudo mount --bind myroot myroot # pacstrap must see myroot as mounted 
sudo pacstrap -i myroot base base-devel
sudo mount -t proc proc myroot/proc/
sudo mount -t sysfs sys myroot/sys/
sudo mount -o bind /dev myroot/dev/
sudo mount -t devpts pts myroot/dev/pts/
sudo cp -i /etc/resolv.conf myroot/etc/
sudo chroot myroot
passwd # set a password 
useradd -m -s /bin/bash user
passwd user # set a password
# in a shell outside the chroot: 
sudo pacman -S xorg-server-xnest
Xnest -ac :1 # or Xnest -ac -geometry 1024x716+0+0 :1 to set the size 
# continue inside the chroot: 
pacman -S xterm
pacman -S xorg-server xorg-xinit xorg-server-utils
pacman -S openbox
pacman -S ttf-dejavu
pacman -S firefox
sudo chroot --userspec=user myroot
openbox &

See also: Basic Chroot