Difference between revisions of "Compal CL56"

From ArchWiki
Jump to: navigation, search
(fix double redirect)
(Tag: wiki-scripts)
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
#REDIRECT [[Installation guide]]
This will follow the steps involved in setting up Arch Linux on a Compal CL56/CL56P Laptop. This is a very common base laptop system that is rebranded by a lot of different companies. This is specifically going to be about the steps needed for a Velocity Micro B51 Campus Edition working fully. There is a linux-laptop.net page: [http://www.bobc-ontheweb.com/linux-on-compal-cl56.html] for the CL56, as well as another page here: [http://heim.ifi.uio.no/~krisvh/linux/cl56.html] also for the CL56.
This will follow all the special things I have had to do and anything new that I come across as it happens.
Out of the 'box' as it were Arch works decently.
lspci output:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 21)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 21)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
02:03.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
* Wireless (Intel Pro Wireless 2200BG)
** The ipw2200 driver which make it work is included in the kernel but you may have to install the ipw2200 firmware to make it work (pacman -S ipw2200-fw). The card supports ''managed'', ''ad-hoc'' and ''monitor'' modes.
** The wifi switch needs the ''acerhk'' module: its source is available at [http://www.cakey.de/acerhk/], but a [[PKGBUILD]] [https://aur.archlinux.org/packages.php?do_Details=1&ID=2728 is available] on the [[AUR]].
** After compiling the module, it needs to be added to the MODULES array in ''/etc/rc.conf''. The AUR build includes a daemon that activates the module, to have it started at boot time add it to the DAEMONS array in ''/etc/rc.conf''.
* SD (Secure Digital) card reader/writer
** It is physically located just underneath the CardBus slot.
** MMC read/write support works with ''mmc_block'' driver.
** Add ''mnt/mmc'' directory and the following line to ''/etc/fstab''
/dev/mmcblk0p1 /mnt/mmc vfat rw,user,auto,exec,sync 0 0
* Sound
** After loading the ''snd_intel8x0'' module the card works without problems.
* ATI Radeon
** just follow the [[ATI]] wiki
** use X.org and just download the proper driver from ATI homepage
** performance is is about 2100 fps with glxgears and 410 fps with fgl_glxgears if drivers are installed correctly
* VGA Dual Monitor Head Output/S-Video output
** works, just use the configuration application included with ATI drivers
** works with standard kernel, just add the following line to ''/etc/rc.local''
* Infrared
** add ''irda ircomm ircomm-tty'' to /etc/rc.conf MODULES list.
** for using GPRS over IR add the following line to ''/etc/rc.local''
mknod /dev/ppp c 108 0
and use ''pppconfig'' to configure the connection settings (use ''/dev/ttyS0'' as the port)
* Touchpad and access to few informations like temperature and fan level
** install aur/omnibook-svn (here with kernel 2.6.25-ARCH, the aur/omnibook did not work)
** add omnibook to MODULES in /etc/rc.conf (MODULES=(... omnibook ...))
** add a line with "options omnibook ectype=1" in /etc/modprobe.d/modprobe.conf (if not set, loading omnibook will fail)
** For touchpad configuration see [[Touchpad_Synaptics]] (use first configuration, not the one for the ALPS touchpads)
** to get temperature: cat /proc/omnibook/temperature
** to see other options: ls /proc/omnibook/*

Latest revision as of 11:53, 23 August 2016

Redirect to: