Difference between revisions of "Courier MTA"

From ArchWiki
Jump to: navigation, search
(Creating the user database)
(Adding "See also")
Line 251: Line 251:
  
 
because domain2 is not valid. You can send to mail.domain2 which will work around that. For boxes at the internet and properly configured domains this is absolute no problem, since you are alway part of a domain and thus have one dot (.) behind the @
 
because domain2 is not valid. You can send to mail.domain2 which will work around that. For boxes at the internet and properly configured domains this is absolute no problem, since you are alway part of a domain and thus have one dot (.) behind the @
 +
 +
==See also==
 +
*[[Simple Virtual User Mail System]]
 +
*[[Postfix]]
 +
*[[SOHO Postfix]]

Revision as of 05:44, 22 September 2010

A SMTP and POP3/IMAP4 Server with courier (pacman refers to it as "courier-mta")

Introduction

This is a "little" text which shall help you to configure the courier mail server. It doesn't cover explicitly the configuration of the popular and widely used Courier-IMAP server. Instead it focuses the big Courier-MTA mail server suite which integrates an MTA and the POP3/IMAP mail fetching methods. While there are many methods how authorization of users for MTA and POP can be integrated in one database there is no such really integrated solution which comes out of the box. There are a couple of Mail-Servers on Windows which support that. But we face Unix/Linux here, don't we. Also some admins might argue that the integration of authentication via external databases or LDAP repositories are absolutely sufficient and even desirable since the POP3 server and the MTA are hosted on separated machines anyway. Well, what does the enthusiastic user who rents one dedicated server or the home user who just wants to serve his or her home network. Mostly the enterprise solutions are copied and narrowed down to personal needs. This creates potential security risks since it is tricky to coordinate all this different pieces of software appropriately.

Courier-MTA is not really simple, but it might be easier than the constructs mentioned above. What advantages are there in Courier-MTA:

  • authentication for MTA and POP3/IMAP happens against one data source
  • this datasource can be a MySQL, PgSQL or LDAP, but also can be simpler like PAM or a compiled plaintextfile (BerkeleyDB)
  • easy support of virtual users
  • SMTP-auth out of the box
  • comes with webmail
  • web based administration possible
  • also has a separate mail delivery agent(MDA) if it is needed

The following text describes a setup for two local domains on one physical machine which is not so uncommon for single users or small companies. We authenticate against a BerkeleyDB based .dat file which is created from a text or a bunch of textfiles automatically by tools that come with courier. This method is described in Couriers documentation as authuserdb. So don't get confused about names. The authentication against other providers happens in an adequate way and is covered in courier-authlibs documentation. There are differences in the handling of SASL methods (such as PLAIN or CRAM-MD5) depending on which authentication backend (authuserd, authpam, authmysql ...) you like to use. Just don't expect that this setup can be painlessly converted from the described authuserdb to authmysql.

NOTE: If you like to test that on your local box but have no DNS-server running the setup fails on some edges because Courier-MTA needs at least an MX entry to work. To work around that you can recompile courier-mta from "abs". Add --without-tcpddns to the configure attributes and go make some coffee, since this will take a while. Then make sure, that you add our dummy domains "domain1" and "domain2" to your /etc/hosts.

Installing

Install courier-mta with pacman: pacman -S courier-mta

Any other mail transfer agents (like cyrus) or smtp servers (sendmail, postfix etc) must be uninstalled for this, say yes when prompted to do so.

Authuserdb authentication

Let courier know that we like to authenticate against authuserdb. So edit /etc/authlib/authdaemonrc and find "authmodulelist=...". Remove all modules but authuserdb :

authmodulelist="authuserdb"

# For test it is useful, to set DEBUG_LOGIN from 0 to 2
DEBUG_LOGIN=2

Creating the vmail user

We want to deliver our mails primarily to virtual users, so that we easily can create E-mail accounts without creating real users. Granny might like to read some mails but she doesn't need ssh access to that box, does she? To make that possible we need one "physical" user, that owns all of our mails physically on the drive. Note, that this is not the courier user which is primarily there to make sure that the actual server process doesn't run as root. Many people save this stuff in /var since it's primarily thought for these things. You can create the users "home" just anywhere you want! The decision will be influenced by the partition layout of your drive(s).

# -as root
# add a user "vmail", who is the lord of all of the mail files
useradd -u 7200 -m -s /bin/bash vmail
passwd vmail

Creating the email accounts

There is a place, where the virtual users and their attributes will be stored. This can be either a plain textfile or a directory where several textfiles are contained. See courier-authlib's documentation for details. The directory based approach makes maintenance a bit easier since we can separate the users of domains and subdomains. So let's go with this approach. The name of the directory is not negotiable.

# as root
mkdir /etc/authlib/userdb

The attributes of the "vmail"-system user need to be stored here, too, since we allowed only authuserdb in /etc/authlib/authdaemonrc . Fortunately, courier comes with a handy script that converts all local users into a file in courier-syntax. This file can be named freely, we call it "system". Later we also create a file for "domain1" and "domain2". Got the idea?

# as root
pw2userdb > /etc/authlib/userdb/system
# keep only the "vmail" user, means that no local user can receive emails!
sed -n -i "/vmail/p" /etc/authlib/userdb/system

Now we create the virtual users in the authentication database. The actual Maildir folders have to be created manually later. This creates a user "user1@domain1" and a "user2@domain2". For details about these commands check the man pages for the command itself and the man pages that are linked to.

# as root
userdb -f /etc/authlib/userdb/domain1 user1@domain1 \
  set home=/home/vmail/domain1/user1 uid=7200 gid=7200
# let's set a password for the user (used for PLAIN and LOGIN and APOP)
userdbpw -md5 | userdb -f /etc/authlib/userdb/domain1 user1@domain1 set systempw
# this is used for CRAM-MD5 and friends (SASL-methods)
# also note that this construct pipes the the password directly into the
# command and thus can be read as cleartext, but can be handy for shell scripts
# that create new users
echo 'pwuser1' | userdbpw -hmac-md5 | \
  userdb -f /etc/authlib/userdb/domain1 user1@domain1 set hmac-md5pw

# repeat that for user2@domain2
userdb -f /etc/authlib/userdb/domain2 user2@domain2 \
  set home=/home/vmail/domain2/user2 uid=7200 gid=7200
userdbpw | userdb -f /etc/authlib/userdb/domain2 user2@domain2 set systempw
echo 'pwuser2' | userdbpw -hmac-md5 | \
  userdb -f /etc/authlib/userdb/domain2 user2@domain2 set hmac-md5pw

Setting up Maildirs

We need to create the virtual users "Maildir" as a physical place on harddrive in "vmail"-systemuser home directory. Note that "vmail" need write rights the and also shall own the files. It's easiest to create that stuff as "vmail"

# become "vmail"
su vmail
mkdir -p /home/vmail/domain1/user1 && maildirmake /home/vmail/domain1/user1/Maildir
mkdir -p /home/vmail/domain2/user2 && maildirmake /home/vmail/domain2/user2/Maildir
exit

Creating the user database

Make sure you become root again, so just leave vmails account by "exit" as written. Now it's time to create the BerkeleyDB from the plain textfiles. It is important, that the files in /etc/authlib/userdb are visible for root only. If the have any world or group rights, courier will not allow to create the db-files from the informations.

# as root
chmod 700 /etc/authlib/userdb && chmod 600 /etc/authlib/userdb/*
makeuserdb

Now we can check if the authentication works. Courier come with a little tool that check if users can be authenticated. But before that you have to make sure, that your authentication daemon is running.

# as root
/etc/rc.d/authdaemond start
authtest user1@domain1
authtest user2@domain2

If you encounter any errors while testing the authentication, please consult these instructions, which detail how to use debugging features to pinpoint the problem.

Configuring courier

Now we are done with authentication stuff for the first. It gave us a flexible layout which can be easily extended. Time to move on to courier's configuration itself. Firstly, we shall try to give some aliases for the server. The aliases follow the userdb's scheme very closely. Unlike in other servers, there is no need to handle with all aliases in just one file. Again, you can create several plain textfiles in one folder, where you can handle the aliases by domains or even finer structured if you like. The folders place is again not negotiable, you have to use /etc/courier/aliases. There is already a "system" file which deals with root, postmaster and the usual suspects. Just add a "user1@domain1" behind the existing "postmaster: " to have all system relevant mails delivered to "user1@domain1". We just assume that this user is your primary account.

# as root
cat > /etc/courier/aliases/domain1 << EOALIASES
user1@domain1:        user1@domain1
user.user1@domain1:   user1@domain1
u.user1@domain1:      user1@domain1
userer1@domain1:      user1@domain1
looser1@domain1:      user1@domain1
EOALIASES

Repeat that for every domain and user, in our testcase for user2@domain2. It might help to create another scheme here like naming your files domain1.user1 which makes administration easier and more transparent. This will also help on automated, script based administration. Finally, these aliases must be exported to the BerkeleyDB. Again, Courier comes with a little utility for that task, it's called makealiases .

# as root
makealiases
# just check if everything is fine
makealiases -chk

Setting localdomain and hosteddomains

Now we need to tell courier the who is who on this box. Whom shall we serve the mails for and whom shall we not. Courier separates this into these levels:

  • locals: this is the localhost for sure and on dedicated servers you are mostly part of a domain like costumercode.serverfarm.tld
  • hosteddomains: for your hosted ad the subdomains

After some conversations, an example to clarify things: lets say you have a server at "blahfarm.com". Usually they make your server a host on their domain. This is likely something like server234.blahfarm.com . Now, you wanna have your server available from the web by a more meaningful and even cooler name, so you buy (or rent) a domain like my-cool-domain.ca . In this case the setup looks like this:

  • server237.blahfarm.com and localhost must be in /etc/courier/locals
  • my-cool-domain.ca must be in /etc/courier/hosteddomains
  • any subdomain like project1.my-coold-domain.ca or smtp.my-cool-domain.ca* also must be in /etc/courier/hosteddomains if you like to have email addresses like info@project1.my-coold-domain.ca

To know what's the difference between these specifications go ahead and read the manpage for makehosteddomains. You will figure, that the following suits our approach:

# as root
echo localhost > /etc/courier/locals
echo costumercode.serverfarm.tld >> locals

mkdir /etc/courier/hosteddomains
cat >  /etc/courier/hosteddomains/domain1 << EODOMAIN1HOSTED
domain1
mail.domain1(tab)domain1
EODOMAIN1HOSTED

cat >  /etc/courier/hosteddomains/domain2 << EODOMAIN2HOSTED
domain2
mail.domain2(tab)domain2
EODOMAIN2HOSTED

Again, thes values must be converted into a BerkeleyDB - use the couriers command:

# as root
makehosteddomains

Before we go on, one more thing needs to be written. Who do we accept mail for. Create one /etc/courier/esmtpacceptmailfor.dir/domain1 and enter there.

domain1

Do the same for domain2. finally as root, makeacceptmailfor and you are done here.

Testing your setup

Now the server is read to rock. Let's run several tests on the SMTP server and see if it's working nicely at least for sending and receiving mails.

###############################################################################
# this is  a testcase suggested on couriers very own webpage, we just convert it
# from a local to a virtual user

# prepare as vmail
su vmail
cd ~/domain1/user1

maildirmake bounces && maildirmake test
echo "./test" > .courier-test-default
echo "./bounces" > .courier

# back to root, start the server and finally run the script
exit
/usr/sbin/courier start
/usr/lib/courier/perftest1 1000 "user1@domain1 user2@domain2"
###############################################################################

Let's test some more stuff, which can be useful.

# send an ordinary mail (as root or ordinary user)
echo "To: user2@domain2
From: user1@domain1" | /usr/bin/sendmail

# send a mail to an alias
echo "To: userer2@domain2
From: user1@domain1" | /usr/bin/sendmail

# send a mail to an external email address
echo "To: me_freak@gmail.com
From: user1@domain1" | /usr/bin/sendmail

Configuring IMAP and POP3

So far, our operations have been focused on the box which runs the server itself. Now we need to setup some interaction related configuration. Since security is important we will setup some nice authentication modes, which doesn't send cleartext passwords. Courier supports CRAM-MD5 among others. You will have to make sure that your clients support that too. So far I tested sylpheed-claws > 1.0.4, esmtp and thunderbird with these settings.

Now it comes in, that we will have to configure the several server daemons. Courier is already running (from the perftest above) but it doesn't provide services to the network. So we have to configure esmtpd, pop3d and imapd with their respective configuration files in /etc/courier/<servicename> .

Since we like to use SMTPAuth instead if a IP/Domain based SMTP authentication we need to activate the AUTHREQUIRED option in esmtpd. Also we activate the CRAM-MD5 challenge method for authorization. NOTE: this setup definitely keeps Outlook losers out. For these buggy and old fashioned clients you will need to use way less restrictive settings!

# this in /etc/courier/esmtpd
AUTH_REQUIRED=1
ESMTPAUTH="CRAM-MD5"

# Add a similar setting to pop3d (note, this happens in file pop3d)
POP3AUTH="CRAM-MD5"

The imapd setting is a bit different. There is a long line starting with IMAP_CAPABILITY. Just add a "AUTH=CRAM-MD5" at the end of the arguments and you should be done.


Remarks: Because of aur very small testcase with just 2 boxes and no domaincontrol we have to take a look at couriers intrinsics and work around a little issue Courier is nitpicking about RFC compliance, which does mean you have to make sure that you understand how to configure your E-mail clients for testing. This will fail in our testing:

+------------+            +---------------+                +-------------------+
|local laptop|  ------->  |local box(with |  ------------> |  MTA somewhere on |
+------------+            |  courier-mta) |                |  web              |
                          +---------------+                +-------------------+

Why? Because you send from a non valid domain name. I assume here, that we use our "domain1" and "domain2" testpark. Now, when you create an account in Sylpheed which looks like this: Name: user numberone Address: user1@domain1 Sylpheed consequently sends the mail as "user numberone <user1@domain1>". This is wrong, since it violates the RFC. You get a Error: 517 - Syntx Error. For the testing you can simply fool Courier-MTA by setting the domainin sylpheeds dialog to: Address: user1@domain1.xx

Something similar (you just get Error 513 -Syntax Error) happens on this case:

+--------------------------+            +------------------------+
|local laptop              |  ------->  |local MTA (courier-mta) |
| sylpheed account         |            | MTA delivers to        |
| user1@domain1.xx sends   |            | user2@domain2          |
| to user2@domain2         |            +------------------------+
+--------------------------+

because domain2 is not valid. You can send to mail.domain2 which will work around that. For boxes at the internet and properly configured domains this is absolute no problem, since you are alway part of a domain and thus have one dot (.) behind the @

See also