From ArchWiki
Revision as of 17:47, 21 August 2012 by Det (talk | contribs)
Jump to navigation Jump to search

zh-CN:Cron Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary link Template:Article summary end

From Wikipedia:

cron is the time-based job scheduler in Unix-like computer operating systems. cron enables users to schedule jobs (commands or shell scripts) to run periodically at certain times or dates. It is commonly used to automate system maintenance or administration [...]


cronie is installed by default as part of the base group. Other cron implementations exist if preferred, Gentoo's Cron Guide offers comparisons. For example, fcron, bcronAUR or vixie-cronAUR offer a wider range of features and configuration options.

Note: Until May 2011, the default cron implementation for Arch Linux was dcron (Dillon's Cron), which is still supported and can be installed from the official repositories.


Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: The following sections of this article are still based on dcron: you are invited to check the validity of the contents below and fix what is out of date. (Discuss in Talk:Cron#)

Users & autostart

cron should be working upon login on a new system to run root scripts. This can be check by looking at the log in /var/log/. In order to use crontab application (editor for job entries), users must be members of a designated group users or root, of which all users should already be members. To ensure cron starts on boot, add the crond daemon to the daemons array of rc.conf.

Handling errors of jobs

Errors can occur during execution of jobs. When this happens, cron registers stderr output of job as e-mail and attempts to send it to the users mail spools via sendmail command.

To log this message use the -M option in the configuration file (crontd), then write a script or install rudimentary SMTP subsystem (esmtp in this example):

# pacman -S esmtp procmail

After installation the SMTP program, configure it's routing (/etc/esmtprc esmtp example):

       username "myself"
       password "secret"
       starttls enabled
mda "/usr/bin/procmail -d %T"

Procmail needs root privileges to work in delivery mode but it is not an issue if you are running the cronjobs as root.

To test that everything works correctly, create a file message.txt with "test message" in it.

From the directory containing message.txt run:

$ sendmail user_name < message.txt 


$ cat /var/spool/mail/user_name 

You should see in the terminal, the "test message", the time and date it was sent.

Thats all, all error output of jobs now will be redirected to /var/spool/mail/$user_name.

Due to the privileged issue, it is hard to create and send the email to root. So you could ask esmtp to forward all root's email to some ordinary users. Add the following lines in esmtprc


If the above test did not work, try creating a file ~/.esmtprc with the same content as /etc/esmtprc, (you can just create a copy as normal user).

Run the following command to make sure it has the correct 710 permission:

$ chmod 710 ~/.esmtprc

Now just repeat the test with message.txt exactly as before.

Crontab format

The basic format for a crontab is:

<minute> <hour> <day_of_month> <month> <day_of_week> <command>
  • minute values can be from 0 to 59.
  • hour values can be from 0 to 23.
  • day_of_month values can be from 1 to 31.
  • month values can be from 1 to 12.
  • day_of_week values can be from 0 to 6, with 0 denoting Sunday.

Multiple times may be specified with a comma, a range can be given with a hyphen, and the asterisk symbol is a wildcard character. Spaces are used to separate fields. For example, the line:

*0,*5 9-16 * 1-5,9-12 1-5 /home/user/bin/

Will execute the script at five minute intervals from 9 AM to 4:55 PM every weekday of the month except during the summer months (June, July, and August). More examples and advanced configuration techniques can be found below.

Basic commands

Crontabs should never be edited directly; instead, users should use the crontab program to work with their crontabs. To be granted access to this command, user must be a member of the users group (see gpasswd command).

To view their crontabs, users should issue the command:

$ crontab -l

To edit their crontabs, they may use:

$ crontab -e

To remove their crontabs, they should use:

$ crontab -r

If a user has a saved crontab and would like to completely overwrite their old crontab, he or she should use:

$ crontab saved_crontab_filename

To overwrite a crontab from the command line (Wikipedia:stdin), use

$ crontab - 

To edit somebody else's crontab, issue the following command as root:

# crontab -u username -e

This same format (appending "-u username" to a command) works for listing and deleting crontabs as well.

To use nano rather than vi as crontab editor, add the following lines to /etc/bash.bashrc:

export EDITOR="/usr/bin/nano"

And restart terminal/s


The entry:

01 * * * * /bin/echo Hello, world!

runs the command /bin/echo Hello, world! on the first minute of every hour of every day of every month (i.e. at 12:01, 1:01, 2:01, etc.)


*/5 * * jan mon-fri /bin/echo Hello, world!

runs the same job every five minutes on weekdays during the month of January (i.e. at 12:00, 12:05, 12:10, etc.)

As noted in the Crontab Format section, the line:

*0,*5 9-16 * 1-5,9-12 1-5 /home/user/bin/

Will execute the script at five minute intervals from 9 AM to 5 PM (excluding 5 PM itself) every weekday (Mon-Fri) of every month except during the summer (June, July, and August).

More information

The cron daemon parses a configuration file known as crontab. Each user on the system can maintain a separate crontab file to schedule commands individually. The root user's crontab is used to schedule system-wide tasks (though users may opt to use /etc/crontab or the /etc/cron.d directory, depending on which cron implementation they choose).

There are slight differences between the crontab formats of the different cron daemons. The default root crontab for dcron looks like this:

# root crontab

# man 1 crontab for acceptable formats:
#    <minute> <hour> <day> <month> <dow> <tags and command>
#    <@freq> <tags and command>

@hourly         ID=sys-hourly   /usr/sbin/run-cron /etc/cron.hourly
@daily          ID=sys-daily    /usr/sbin/run-cron /etc/cron.daily
@weekly         ID=sys-weekly   /usr/sbin/run-cron /etc/cron.weekly
@monthly        ID=sys-monthly  /usr/sbin/run-cron /etc/cron.monthly

These lines exemplify one of the formats that crontab entries can have, namely whitespace-separated fields specifying:

  1. @period
  2. ID=jobname (this tag is specific to dcron)
  3. command

The other standard format for crontab entries is:

  1. minute
  2. hour
  3. day
  4. month
  5. day of week
  6. command

The crontab files themselves are usually stored as /var/spool/cron/username. For example, root's crontab is found at /var/spool/cron/root

See the crontab man page for further information and configuration examples.

run-parts issue

cronie use run-parts to carry out script in cron.daily/cron.weekly/cron.monthly. Be careful that the script name in these folders should not have any '.', like Since run-parts without options will ignore them. Detail information see man run-parts.

Running Xorg server based applicatoins

If you find that you cannot run X apps from cron jobs then put this before the command:

export DISPLAY=:0.0 ;

That sets the DISPLAY variable to the first display; which is usually right unless you like to run multiple xservers on your machine.

If it still does not work then you need to use xhost to give your user control over X11:

# xhost +si:localuser:$(whoami)

I put it in my gnome `Startup Applications' like this:

bash -c "xhost +si:localuser:$(whoami)"

Asynchronous job processing

If you regularly turn off your computer but do not want to miss jobs, there are some solutions available (easiest to hardest):

Vanilla dcron supports asynchronous job processing. Just put it with @hourly, @daily, @weekly or @monthly with a jobname, like this:
@hourly         ID=greatest_ever_job      echo This job is very useful.
Cronwhip (AUR, forum thread)
Script to automatically run missed cron jobs; works with the default cron implementation, dcron.
Anacron (AUR)
Full replacement for dcron, processes jobs asynchronously.

See also

CronTab Config and Examples