Difference between revisions of "Dell Inspiron 8500"

From ArchWiki
Jump to: navigation, search
(X.org)
m (ATI Mobility Raedon)
Line 43: Line 43:
 
===ATI Mobility Raedon===
 
===ATI Mobility Raedon===
 
my working /etc/X11/xorg.conf
 
my working /etc/X11/xorg.conf
 +
Note: I have an Alps touchpad that uses the synaptics driver. You would need to install the "synaptics" package to use it. (As configured below it has no tapping.)
 +
 +
 
  # **********************************************************************
 
  # **********************************************************************
 
  # Modules section. This allows moduels to be specified
 
  # Modules section. This allows moduels to be specified

Revision as of 14:17, 19 October 2007


Intro

Summary

I didn't even finished the text, so don't follow exactly whats here, only inspire yourself until I'm finished. ArchLinux is my best experience so far with linux on this computer, even if its a laptop! I've tried Mandrake 10, 10.1, Suse 9.2, Gentoo 2004.3 and Fedora Core 2 and 3. I really like the KISS philosophy!

To do

  • Clean up new wiki. MediaWiki is great but has break all the layout... Need to clean this mess!
  • Make swsusp2 work
  • Clean up of acpi/cpufreq with the governor chooser
  • ACPI daemon and events
  • Better kernel configuration display


Working

  • Ethernet: Broadcom chip, use b44 module
  • Wireless: Dell TrueMobile 1300 ndiswrapper
  • Audio: ac97 (?)
  • Display: 1920x1200
  • Firewire
  • InfraRed (IrDa)

Partially Working

  • nVidia Geforce4 4200 Go (64 Mb)

Not Working

  • Modem

Unknown / Untested

Installation

To do

Kernel

A working v2.6.19 config is at http://pastebin.archlinux.org/345

X.org

nVidia Geforce4 4200 Go (64 Mb)

to do

ATI Mobility Raedon

my working /etc/X11/xorg.conf Note: I have an Alps touchpad that uses the synaptics driver. You would need to install the "synaptics" package to use it. (As configured below it has no tapping.)


# **********************************************************************
# Modules section. This allows moduels to be specified
# **********************************************************************

Section "Module"

   Load "dbe"  	# Double buffer extension

   SubSection  "extmod"
     Option    "omit xfree86-dga"   # don't initialise the DGA extension
   EndSubSection

   Load "freetype"
   Load "glx"
   Load "dri"
   Load "drm"
   Load "synaptics"

EndSection


# ******************************
# Files section
# ******************************

Section "Files"

   FontPath   "/usr/share/fonts/misc"
   FontPath   "/usr/share/fonts/TTF"
   FontPath   "/usr/share/fonts/local"
   
EndSection


# ******************************
# Server flags section
# ******************************

Section "ServerFlags"

EndSection


# ******************************
# Core keyboard's InputDevice section
# ******************************

Section "InputDevice"

   Identifier "Keyboard1"
   Driver	   "kbd"
   Option     "AutoRepeat" "500 30"
   Option     "XkbRules"   "xorg"
   Option     "XkbModel"   "dell101"
   Option     "XkbLayout"  "us"

EndSection


# ******************************
# Core Pointer's InputDevice section
# ******************************

Section "InputDevice"

   Identifier "Generic Mouse"
   Driver "mouse"
   Option "Protocol" "Auto" # Auto detect
   Option "Device" "/dev/input/mice"
   Option "ZAxisMapping" "4 5 6 7"
   Option "Emulate3Buttons"

EndSection

Section "InputDevice"

   Driver     "synaptics"
   Identifier "Alps touchpad"
   Option     "Device" "/dev/input/mice"
   Option     "Protocol" "auto-dev"
   Option     "Emulate3Buttons"

   # synaptic driver specific options
   Option  "LeftEdge"        "1700"
   Option  "RightEdge"       "5300"
   Option  "TopEdge"         "1700"
   Option  "BottomEdge"      "4200"
   Option  "FingerLow"       "25"
   Option  "FingerHigh"      "30"
   Option  "MaxTapTime"      "180"
   Option  "MaxTapMove"      "220"
   Option  "VertScrollDelta" "100"
   Option  "MinSpeed"        "0.4"
   Option  "MaxSpeed"        "0.5"
   Option  "AccelFactor"     "0.01"
   Option  "SHMConfig"       "on"
   # Option  "Repeater"    "/dev/ps2mouse"

EndSection


# ******************************
# Monitor section
# ******************************

Section "Monitor"

   Identifier  "Dell Inspiron 8500 WXGA LCD"
   HorizSync   15-100
   VertRefresh 15-100

EndSection


# ******************************
# Graphics device section
# ******************************

Section "Device"

   Identifier  "ATI Mobility Radeon 9600"
   Driver      "radeon"
   Option "AGPMode" "4"

EndSection


# ******************************
# Screen sections
# ******************************

Section "Screen"

   Identifier   "Screen 1"
   Device       "ATI Mobility Radeon 9600"
   Monitor      "Dell Inspiron 8500 WXGA LCD"
   DefaultDepth 24

   Subsection "Display"
       Depth    24
       Modes    "1280x800"
       ViewPort 0 0
   EndSubsection

EndSection


# ******************************
# ServerLayout sections.
# ******************************

Section "ServerLayout"

   Identifier  "Layout 1"
   Screen      "Screen 1"
   InputDevice "Alps Touchpad" "CorePointer"
   InputDevice "Keyboard1" "CoreKeyboard"

EndSection


# ******************************
# DRI extension options section
# ******************************

Section "DRI"
   Group "video"
   Mode 0666
EndSection

Section "Extensions"
   Option "Composite" "Enable"
   Option "RENDER"    "Enable"
EndSection

Hardware

Infrared receiver

First shutdown computer, reboot and enter the BIOS by pressing F2. Find the Infrared option, enable it (it is disable by default!) and set it to COM2. Visit LIRC's webpage and download their latest CVS snapshot. Extract, go into directory and run setup.sh :

> wget http://lirc.sourceforge.net/software/snapshots/lirc-0.8.1pre3.tar.bz2
> tar -jxvf lirc-0.8.1pre3.tar.bz2
> cd lirc-0.8.1pre3
> ./setup.sh

Then select :

1 Driver configuration
--> 6 IrDA hardware
   --> 1 SIR IrDA (built-in IR ports)
3 Save configuration & run configure

Now make it :

make && sudo make install

Be sure you do not have the irdautils package. It blocks the serial port. You will need to load the "lirc_sir" module. If you got error like :

lirc_sir: i/o port 0x02f8 already in use.

in dmesg, run this command as root :

# /bin/setserial /dev/ttyS1 uart none

then try again to modprobe "lirc_sir". If it works, create the file "/etc/modprobe.d/lirc" and put is that line :

install lirc_sir /bin/setserial /dev/ttyS1 uart none; /sbin/modprobe --ignore-install lirc_sir

This will run the command above each time you try to modprobe the "lirc_sir" module. Add the module to autoload (/etc/modules).

Now continue as the installation procedur of lirc.


Power Management

I suggest you read Gentoo Power Management Guide for great information. After some work on this I wanted to add some information specific to the I8500.

CPU Throtle

Modprobe the modules :

  • cpufreq_conservative
  • cpufreq_ondemand
  • cpufreq_userspace
  • cpufreq_powersave

Then set the governor by using cpufreq-set. For ondemand :

# cpufreq-set -g ondemand

For performance (higher frequency):

# cpufreq-set -g performance

For powersaving (lower freqency) :

# cpufreq-set -g powersave

ACPI

To turnoff the computer when you press the power button, put the following in /etc/acpi/handler.sh

button/power)
       case "$2" in
           PBTN)
                   logger "PowerButton pressed: $2"
                   halt
           ;;
           *)    logger "ACPI action undefined: $2" ;;
       esac

Replace the "halt" line with the shutdown command of your choice.


To turn off the backlight of an ATI Radeon Mobility card, put the following in /etc/acpi/handler.sh

button/lid)
       case "$2" in
           LID)
               logger "ACPI button/lid action"
               STATE=`radeontool light`
               case "$STATE" in
                   "The radeon backlight looks on") radeontool light off ;;
                   "The radeon backlight looks off") radeontool light on ;;
               esac
               ;;
       esac
       ;;

This requires that you have the radeontool package installed (it is in AUR). You also need to add "acpid" to the DAEMONS array in /etc/rc.conf.

Links

General

Linux on a Dell Inspiron 8500

Debian

RedHat 9.0

Fedora Core 2

Suse 9.2

Slackware Linux

Debian

Linux Debian 3.1