Dell Latitude E6x00

From ArchWiki
Revision as of 13:40, 22 March 2009 by W1rele55 (Talk | contribs) (AlpsPS/2 ALPS DualPoint TouchPad)

Jump to: navigation, search


Tango-document-new.pngThis article is a stub.Tango-document-new.png

Notes: please use the first argument of the template to provide more detailed indications. (Discuss in Talk:Dell Latitude E6x00#)


Introduction

The Dell Latitude E-Series: 6400/6500. This article will tell you how to get the basic components of the laptop running with Arch.

Installation

The Official Arch Linux Install Guide should get you running without a problem.

Further help can be found in the Forum:

* Linux on the Dell Latitude E6400
* Dell Latitude E6400 internal mic not working

Hardware

The Dell E6500 comes with the following hardware:

$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 RAID bus controller: Intel Corporation Mobile 82801 SATA RAID Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)


AlpsPS/2 ALPS DualPoint TouchPad

To enable horizontal and vertical scrolling:
$ cat /etc/hal/fdi/policy/touchpad.fdi
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
 <device>
   <match key="info.capabilities" contains="input.touchpad">
    <match key="info.product" contains="AlpsPS/2 ALPS DualPoint TouchPad">
       <merge key="input.x11_driver" type="string">synaptics</merge>

<merge key="input.x11_options.LeftEdge" type="string">130</merge> <merge key="input.x11_options.RightEdge" type="string">840</merge> <merge key="input.x11_options.TopEdge" type="string">130</merge> <merge key="input.x11_options.BottomEdge" type="string">640</merge> <merge key="input.x11_options.LeftRightScrolling" type="string">1</merge> <merge key="input.x11_options.VertScrollDelta" type="string">10</merge> <merge key="input.x11_options.HorizScrollDelta" type="string">10</merge> <merge key="input.x11_options.MinSpeed" type="string">0.50</merge> <merge key="input.x11_options.MaxSpeed" type="string">0.75</merge> <merge key="input.x11_options.EdgeMotionMinSpeed" type="string">200</merge> <merge key="input.x11_options.EdgeMotionMaxSpeed" type="string">200</merge> <merge key="input.x11_options.UpDownScrolling" type="string">1</merge> <merge key="input.x11_options.CircularScrolling" type="string">0</merge> <merge key="input.x11_options.CircScrollDelta" type="string">0.1</merge> <merge key="input.x11_options.CircScrollTrigger" type="string">2</merge> <merge key="input.x11_options.SHMConfig" type="string">on</merge> <merge key="input.x11_options.Emulate3Buttons" type="string">off</merge> <merge key="input.x11_options.VertEdgeScroll" type="string">1</merge> <merge key="input.x11_options.HorizEdgeScroll" type="string">1</merge> <merge key="input.x11_options.GrabEventDevice" type="string">1</merge> <merge key="input.x11_options.SendCoreEvents" type="string">true</merge>

       <merge key="input.x11_options.TapButton1" type="string">1</merge>
       <merge key="input.x11_options.TapButton2" type="string">2</merge>
       <merge key="input.x11_options.TapButton3" type="string">3</merge>
     </match>
   </match>
 </device>
</deviceinfo>

DualPoint Stick

To enabling scrolling with middle button:

$ cat/etc/hal/fdi/policy/trackpoint.fdi 
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
 <device>
  <match key="info.capabilities" contains="input.mouse">
    <match key="info.product" string="DualPoint Stick">
     <merge key="input.x11_options.EmulateWheel" type="string">true</merge>
       <merge key="input.x11_options.EmulateWheelButton" type="string">2</merge>
       <merge key="input.x11_options.EmulateWheelTimeout" type="string">200</merge>
       <merge key="input.x11_options.XAxisMapping" type="string">6 7</merge>
       <merge key="input.x11_options.YAxisMapping" type="string">4 5</merge>
    </match>
   </match>
 </device>
</deviceinfo>