Dell Vostro 1400

From ArchWiki
Revision as of 14:47, 28 July 2009 by Adamorjames (Talk | contribs) (Graphical Input)

Jump to: navigation, search

Tango-document-new.pngThis article is a stub.Tango-document-new.png

Notes: please use the first argument of the template to provide more detailed indications. (Discuss in Talk:Dell Vostro 1400#)


This page deals with setting up Arch Linux on the Dell Vostro 1400 laptop. Nvidia graphics work excellently with the Nvidia 8400GS with no real hacks. I get about 4400 fps in glxgears.


For the Intel Core 2 Duo (and all laptop cpu's) you must follow the instructions to setup the CPU Frequency Scaling.




To know your exact wireless card you can run:

lspci | grep Net

mini Dell Wireless / Broadcom based cards

If you have a Broadcom BCM4328 802.11a/b/g/n (and maybe other flavours) you can follow the installation instructions for Broadcom BCM4312.

Intel based cards

Follow the instructions for the Intel Wifi 4965 chipset

Graphical Input

There is more than one way to do this but we'll use HAL. First enter this as root to get hal.

pacman -S hal

Once it is installed you can start it by typing this as root.

/etc/rc.d/hal start

You will want to add "hal" to your daemons list in /etc/rc.conf.


Now that HAL is insttaled follow the instructions for Synaptic touchpad via HAL policy


First of all it is necessary to install the Xorg server. The easiest way to do this is by entering the following command as root:

pacman -Sy xorg

Press Y to install all the packages and wait for the download to finish.

Nvidia GeForce 8400M GS

The proprietry Nvidia drivers are setup very easily for the GeForce 8400M GS. Having installed Xorg (see above) you type in this command into the console as root:

pacman -S nvidia

After it has finished downloading you need to configure the Nvidia drivers. You will need to be logged in as root. Enter the following command:


Now, open up /etc/X11/XF86Config in a text editor and comment out the line; Load "type1". For this example we'll use nano:

nano /etc/X11/XF86Config

and comment it out with a hash (#) symble like so:

#    Load           "type1"

You should now have successfully setup the Nvidia drivers.