Dell Vostro 3360
On manufacturer site: 
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10)
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:648b Microdia Bus 002 Device 004: ID 0cf3:e004 Atheros Communications, Inc.
There's no card support at the moment (3.9 branch). However 3rd-party driver exists, and it's on the way to merging into mainline. As we want to use it right now, we'll use AUR:
To load driver, type sudo modprobe alx. dmesg will indicate something like this:
[75367.300725] Compat-drivers backport release: compat-drivers-v3.9-rc4-2-su [75367.300728] Backport based on linux-stable.git v3.9-rc4 [75367.300730] compat.git: linux-stable.git [75367.301040] Qualcomm Atheros(R) AR816x/AR817x PCI-E Ethernet Network Driver [75367.314351] alx 0000:02:00.0: alx(84:8f:69:d3:a6:09): Qualcomm Atheros Ethernet Network Connection
Then configure network as usual.
Original Ubuntu provides 3rd-party unknown daemon for touchpad, and control utility is written in Java. That is unknown crap, moreover it's unavailable for non-Ubuntu system. The worst is that currently (3.9 kernel) touchpad is not supported by kernel. It's detected as common PS/2 mouse, but recently 3rd-party driver appeared:
After compiling and installing it would be nice to reload psmouse module:
sudo rmmod psmouse sudo modprobe psmouse
Voilà — touchpad works as it must: you may use two-fingers scroll in any direction, control it via gsynaptics etc. Touchpad LED also works (out-of-the-box). To turn LED on:
echo 255 >/sys/class/leds/dell-laptop::touchpad/brightness
echo 0 >/sys/class/leds/dell-laptop::touchpad/brightness
Works out-of-the-box. You don't need GSPCA for that.
Works out-of-the-box. Notice that rts5139 driver is in staging, so be ready to complain on bugs.
Intel HD4000 works OK since 3.4 kernel, use earlier kernels at one's own risk.
CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_PREALLOC_SIZE=4096 CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_INPUT_BEEP_MODE=1 CONFIG_SND_HDA_INPUT_JACK=y CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_HDMI=y CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_GENERIC=y CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
Other HDA codecs are unnecessary.
Note that full sound support including internal mic support appeared in 3.9 kernel, do consider using it. PulseAudio works OK as well.
No way to make hardware ones work. Brightness, volume and mediaplayer keys work OK. For touchpad toggling consider using my desktop-scripts: 
Test libfprintd version with VFS5011 Fingerprint Reader support is available here: . Work OK.
It's OK to pass the following options to kernel via bootloader:
to use native brightness control module. Otherwise it's level won't be stored. But if you use KDE, remove this one:
otherwise KDE won't be able to adjust brightness.
It works, but requires several tricks to take bugs away. Create tricks.sh file in /usr/lib/systemd/system-sleep/ folder with the following content:
#!/bin/sh case $1/$2 in pre/hibernate) echo never >/sys/kernel/mm/transparent_hugepage/enabled echo 1 >/sys/power/tuxonice/replace_swsusp echo 1 >/sys/power/tuxonice/compression/enabled echo 1 >/sys/power/tuxonice/user_interface/enable_escape echo 1 >/sys/power/tuxonice/user_interface/default_console_level echo lzo >/sys/power/tuxonice/compression/algorithm echo shutdown >/sys/power/disk ifconfig wlan0 down modprobe -r alx uksmctl -d sync ;; post/hibernate) modprobe alx hdparm -B 253 /dev/sda uksmctl -a echo madvise >/sys/kernel/mm/transparent_hugepage/enabled ;; pre/suspend) uksmctl -d sync ;; post/suspend) hdparm -B 253 /dev/sda uksmctl -a ;; esac
and make it executable. It you don't use pf-kernel, remove all strings related to TuxOnIce, UKSM and Transparent Hugepages.
Also it's nice to pass the following option to kernel via bootloader:
otherwise errors during hibernation may occur. They do not interrupt hibernation, just pollute the screen. Everything works without this option.