Difference between revisions of "Dell XPS 13"

From ArchWiki
Jump to: navigation, search
(initial writeup)
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[Category: Dell]]
 
[[Category: Dell]]
 
 
This page is a work in progress.
 
This page is a work in progress.
  
Line 9: Line 8:
 
== Booting the install media ==
 
== Booting the install media ==
  
Booting from the install media runs with no issues. I had some issues with the cord of my external optical drive functioning weirdly, but I suspect it's specific to my device.
+
Booting from the install media runs with almost no issues. If the screen corrupts, append ''nomodeset'' to the kernel parameters. I had some issues with the cord of my external optical drive functioning weirdly, but I suspect it's specific to my device.
  
 
== Partitioning ==
 
== Partitioning ==
  
By default, this computer comes with an MBR with all four partitions already used. Additionally, I have read that if you delete any of the partitions, '''the boot process will break.''' (I can confirm this, although for obvious reasons, I only tested it once.) Therefore, a dual-boot with Windows is impossible on this machine, although just Arch would probably be fine. One solution could be [[booting from a permanent USB installation|Installing_Arch_Linux_on_a_USB_key]]. However, that has its caveats too. See the next section.
+
By default, this computer comes with an MBR with all four partitions already used. Additionally, I have read that if you delete any of the partitions, '''the boot process will break.''' (I can confirm this, although for obvious reasons, I only tested it once.) Therefore, a dual-boot with Windows is impossible on this machine, although just Arch would probably be fine. One solution could be [[Installing Arch Linux on a USB key|booting from a permanent USB installation]]. However, that has its caveats too. See the next section.
  
 
==  BIOS and USB keys ==
 
==  BIOS and USB keys ==
Line 27: Line 26:
 
On a stock install, the screen brightness does not work. When you use the function keys, the change is recognized by the system (if you have an indicator or something for brightness it will change), but this will have zero effect on the actual screen brightness.
 
On a stock install, the screen brightness does not work. When you use the function keys, the change is recognized by the system (if you have an indicator or something for brightness it will change), but this will have zero effect on the actual screen brightness.
  
For completeness, this issue is also present in Ubuntu, where there's a hardware enablement kernel specifically for this laptop.
+
You can add udev rule to solved this problem,see: [[Udev#Writing_udev_rules]].
 
+
{{hc| /etc/udev/rules.d/40-brightness.rules|<nowiki>ACTION=="add", KERNEL=="intel_backlight", SUBSYSTEM=="backlight", ATTR{brightness}="0"</nowiki>}}
You could try installing {{Template:AUR|linux-mainline-dellxps}}. I haven't tested this yet.
+
  
 
== Trackpad ==
 
== Trackpad ==
  
 
Apparently there's issues with the trackpad, but I haven't tested it yet. The situation around this is is the exact same as the screen brightness: it's also present in Ubuntu, where it's fixed by the hardware enablement kernel; try {{Template:AUR|linux-mainline-dellxps}}.
 
Apparently there's issues with the trackpad, but I haven't tested it yet. The situation around this is is the exact same as the screen brightness: it's also present in Ubuntu, where it's fixed by the hardware enablement kernel; try {{Template:AUR|linux-mainline-dellxps}}.

Revision as of 15:00, 23 August 2013

This page is a work in progress.

Installation

Installation largely runs smoothly. See below for potential problems.

Booting the install media

Booting from the install media runs with almost no issues. If the screen corrupts, append nomodeset to the kernel parameters. I had some issues with the cord of my external optical drive functioning weirdly, but I suspect it's specific to my device.

Partitioning

By default, this computer comes with an MBR with all four partitions already used. Additionally, I have read that if you delete any of the partitions, the boot process will break. (I can confirm this, although for obvious reasons, I only tested it once.) Therefore, a dual-boot with Windows is impossible on this machine, although just Arch would probably be fine. One solution could be booting from a permanent USB installation. However, that has its caveats too. See the next section.

BIOS and USB keys

Unfortunately, if you install to a USB key and select GPT instead of an MBR, the BIOS will fail to boot with "operation system not found", even of you use the hack where you set the boot flag in the protective MBR.

So far I have tried upgrading the BIOS, which did nothing. I still have more experiments to run before I conclude that this configuration is impossible.

Post-installation

Screen brightness

On a stock install, the screen brightness does not work. When you use the function keys, the change is recognized by the system (if you have an indicator or something for brightness it will change), but this will have zero effect on the actual screen brightness.

You can add udev rule to solved this problem,see: Udev#Writing_udev_rules.

 /etc/udev/rules.d/40-brightness.rules
ACTION=="add", KERNEL=="intel_backlight", SUBSYSTEM=="backlight", ATTR{brightness}="0"

Trackpad

Apparently there's issues with the trackpad, but I haven't tested it yet. The situation around this is is the exact same as the screen brightness: it's also present in Ubuntu, where it's fixed by the hardware enablement kernel; try linux-mainline-dellxpsAUR.