Dell XPS 13 (9360)
|USB-C / Thunderbolt 3||Working||?|
|Fingerprint sensor||Not working||?|
The Dell XPS 13 Late 2016 (9360) is the fourth-generation model of the XPS 13 line. The laptop is available since October (pre-2017 model) in both a standard edition with Windows installed as well as both a pre-2017 model and a 2017 model (with insignificant hardware differences) Developer Edition with Ubuntu 16.04 "SP1" installed, featuring kernel 4.8 as of now. There is only minor hardware differences between them, mostly in regards to the mainboard microchip manufacturers. Just like the older versions (Dell XPS 13 (9333), Dell XPS 13 (9343) and Dell XPS 13 (9350)) it is available in different hardware configurations as well. These fourth gen models includes Intel's Kaby Lake CPUs and advertised with up to 16GB LPDDR 1866 MHz RAM and a 1TB PCI SSD. It will now also be available in Rose Gold. Prior to previous information and current specifications available provided by Dell (at least to regular customers), it is not available with the 2133 MHz RAM speed. However, some models, including those available to employees and possibly Dell partners (and/or business customers), memory speed is indeed available up to 2133 Mhz LPDDR3 (non-upgradable). ref. The same mentioned models are also available with the Intel Core i7-7660U (aswell as i7-7560U) with the Intel 640 Iris Plus onboard graphics. Respective clock frequencies are 2.5 Ghz (up to 4GHz in Turbo-mode) and 2,4 Ghz (up to 3.8 Ghz), respectively.
The installation process for Arch on the XPS 13 does not differ from any other PC. For installation help, please see the Installation guide and UEFI. This page covers the current status of hardware support on Arch, as well as post-installation recommendations.
As of kernel 4.5, the Intel Kaby Lake architecture is supported.
- 1 Content adaptive brightness control
- 2 NVM Express SSD
- 3 Video
- 4 Wireless
- 5 Bluetooth
- 6 Thunderbolt 3 / USB 3.1
- 7 SATA controller
- 8 Touchpad
- 9 Touchscreen
- 10 Keyboard Backlight
- 11 Hidden Keyboard Keys
- 12 Firmware Updates
- 13 Troubleshooting
- 14 See Also
Content adaptive brightness control
In the XPS 13 the display panels (both FHD and QHD+) come with adaptive brightness embedded in the panel firmware, this "content adaptive brightness control" (usually referred to as CABC or DBC) will adjust the screen brightness depending on the content displayed on the screen and will generally be found undesirable, especially for Linux users who are likely to be switching between dark and light screen content. Dell has issued a fix for this however it is only available to run in Windows and for the QHD+ model of the laptop so this precaution should be taken before installing Linux, the FHD model of the XPS 13 (9360) cannot be fixed. This is not a problem with the panel but rather a problem with the way the panels are configured for the XPS 13, as the same panel exists in the Dell's Latitude 13 7000 series (e7370) FHD model but with CABC disabled. The fix is available directly from Dell.
NVM Express SSD
NVME Power Saving Patch
Andy Lutomirski has created a patchset which fixes powersaving for NVME devices in linux. Currently, this patch is not merged into mainline yet. Until it lands in mainline kernel use the AUR or repository linked below. Linux-nvme — Mainline linux kernel patched with Andy's patch for NVME powersaving APST.
This patch is now in mainline (4.11rc1), so it is a matter of time before the standard kernel can be used instead.
If you have the QHD+ (3200x1800) model, also check out HiDPI for UI scaling configurations.
Module-based Powersaving Options
For the HD 620 graphics card the following modules are working: (see Intel graphics#Module-based Powersaving Options)
modeset=1 enable_rc6=1 enable_fbc=1
The first argument is to enable modesetting if it's not set by default. The second argument is needed to active power-saving C-States. Higher values than 1 are not available for kaby lake CPUs. The third argument is for frame buffer compression power savings. These values should work well!
These arguments are used to enable GuC updates. GuC is a small proprietary binary blob released by intel to update the GuC binary in faster intervals than the kernel release does. It is used for graphics workload scheduling on the various graphics parallel engines. More details at (https://01.org/linuxgraphics/downloads/firmware). The GuC binary for kaby lake is included since firmware release linux-firmware 20170217 in the official repository.
HuC is also an binary blob from intel. It's designed to offload some of the media functions from the CPU to GPU. More details at (https://01.org/linuxgraphics/downloads/firmware). As of kernel 4.11, HuC remains unsupported.
enable_psr=1 disable_power_well=0 OR enable_psr=2
Enable psr level 2 is working, while level 1 has a lot of problems. Setting it on level 2 doesn't give much energy saving at the moment. It's said that 'disable_power_well=0 enable_psr=1' is working in this combination.
NOT WORKING: semaphores=1
The semaphore option is NOT working for kaby lake CPUs and won't enable even if you set the option to 1.
Blank screen issue after booting
If using "late start" KMS (the default) and the screen goes blank when loading modules, it may help to add
intel_agp to the initramfs or using a special kernel parameter. Consult Intel graphics#Blank screen during boot, when "Loading modules" for more information about the kernel parameter way and have a look at Kernel mode setting#Early KMS start for a guide on how to setup the modules for the initramfs.
The Killer 1535 Wirless Adapter is functional and the ath10k firmware is included in recent linux kernel versions. The connection speed reported by iw is limited to 1-6Mbits/s. However this is just the output being wrong. The real connection speed is not limited to this value.
Some users are experiencing issues, where the connection is dropped under heavy load but reconnects within a brief moment. This might not be noticed during browsing at all but becomes apparent in online games. There is no know solution so far.
After following the instructions given at Bluetooth tethering of internet connections via phone works immediately.
Thunderbolt 3 / USB 3.1
The USB-C port supports Thunderbolt 3, Displayport-over-USB-C and USB power delivery as well as USB 3.1.
Ethernet repeatedly disconnects/reconnects with Dell USB-C adapter (DA200)
Use of a power management package (such as TLP) may cause the ethernet adapter to repeatedly disconnect and reconnect. If this happens, disable/blacklist USB autosuspend for the ethernet adapter. (On my laptop, this is the device Bus 004 Device 007: ID 0bda:8153 Realtek Semiconductor Corp in the output of lsusb.)
Also disabling or reducing power of wifi may help: http://en.community.dell.com/support-forums/network-internet-wireless/f/3324/t/19995423
USB-C Compatibility Chart
|Apple USB-C Digital AV Multiport Adapter||USB-C, USB-A, HDMI||Not Working|
|Apple 29W USB-C Power Adapter||USB-C Power||Not Working|
|Aukey USB C Hub HDMI 4 Port||USB-C, 4xUSB-A, HDMI||Working|
|Belkin USB-C to VGA Adapter||VGA||Working|
|Dell DA200||USB-A, Ethernet, HDMI, VGA||Working|
|Dell WD15 130W||3xUSB-A 3.0, 2xUSB-A 2.0, Ethernet, HDMI, Mini DisplayPort, VGA, Line Out, Line In||Working|
|StarTech.com tb32dp2 - Thunderbolt 3 Adapter||2 x DP (4 K, 60 Hz)||Working|
|Cable Matters USB-C Multiport Adapter||4K HDMI or VGA, USB 3.0, Gigabit Ethernet||Working|
|Juiced Systems BizHUB USB-C Multiport Gigabit HDMI Hub||4K@30Hz HDMI, 3x USB 3.0, Gigabit Ethernet, USB-C Power, SD, Micro-SD||Working|
|Anker USB-C to HDMI Adapter||4K@60Hz HDMI||Working|
|PCT UHC304||HDMI (4K@30Hz, 2K@60Hz), Gigabit Ethernet, USB-A, USB-C||Working|
|i-Tec USB-C Dual Display MST Dock||HDMI, DP (4K@30Hz Single Monitor, 1920x1200@60Hz Dual Monitor), Gbit Ethernet, 3xUSB-A, USB-C, Sound, Charging @ 60W||Working|
|Tripp Lite USB-C to DVI External Video Adapter||DVI, Gbit Ethernet, USB-A, USB-C PD Charging Port||Working|
|StarTech CDP2HD - USB-C to HDMI Adapter||HDMI||Working|
|Kanex USB-C to HDMI 4K Adapter||HDMI||Working|
Thunderbolt Firmware updates
The thunderbolt controller in the laptop has an embedded firmware. The laptop ships with firmware version NVM 18, and the most recent available version from Dell's website is NVM 21. If encountering compatibility problems with Thunderbolt accessories, the firmware may need to be updated. Dell maintains a Github repository explaining the process to update the firmware, but unfortunately, does not provide the updated payload files. These can be extracted from the Windows firmware update files. Mainline support for the firmware update process is pending the inclusion of these patches into the Linux kernel.
Here is a short list of steps to update the Thunderbolt-Firmware (use at your own risk):
- Install AUR, AUR, AUR and AUR
- Load the thunderbolt-icm kernel module and start thunderbolt.service
- Download the Intel_TBT3_FW_UPDATE_*.exe from Dell's website
- Unpack the exe with 7z x Intel_TBT3_FW_UPDATE_*.exe
- Follow the update instructions at Dell's TB Github repository, Using the correct Firmware file from the extracted exe (Intel/0x075B.bin for the 9360 according to the info in Dell's Repository
- Hope everything goes well and reboot after finishing the update
When the SATA-controller is set to
RAID On in Bios, the hard disk (at least the SSD) is not recognized. Set to
AHCI is recommended) before attempting to install Arch.
The touchpad has no explicit buttons. The buttons are built into the pads surface. There is a small line printed on the pad separating left from right click button. The pad has a middle button built in! (works with libinput without any configuration): To issue a middle click, simply press on the middle area right between the virtual left and click buttons - so on the small printed separator line.
Remove psmouse errors from dmesg
dmesg | grep -i psmouse returns an error, but your touchpad still works, then it might be a good idea to disable
psmouse. First create a config file:
# nano /etc/modprobe.d/modprobe.conf blacklist psmouse
Then add this file to
... FILES="/etc/modprobe.d/modprobe.conf" ...
Rebuild your initial ramdisk image (see Mkinitcpio#Image creation and activation).
The touchscreen works without additional configuration. The bug resulting in a disabled touchscreen after resume was fixed with kernel 4.8.5.
Refer to libinput#Gestures for information about the current development state and available methods.
Scrolling in Firefox
See Firefox/Tweaks#Pixel-perfect trackpad scrolling. This enables both touchscreen scrolling and high-res trackpad scrolling.
By default, the keyboard backlight turns off after 10 seconds of inactivity. Some users might find this too short and annoying. The delay can be increased (or decreased) by editing this file:
You can also change the brightness (0-2) by editing the following file. This is identical to pressing F10 on your keyboard:
Hidden Keyboard Keys
There are additional Fn+<Key> (sequences) that are not marked at all on the keyboard but underlying hardware generates them anyway. Here they are (if you find more add them to the table below):
|Fn+<Key>||Resulting key (sequence)|
|Fn+A / D / E / F / G / T / Q / W||XF86Launch3|
Dell provides firmware updates via Flashing BIOS from Linux#fwupd. Please note if you have used a bind mount partition for /boot, you will not be able to use the fwupd utility; Instead format a USB as FAT32 and put the bios update .exe on. Reboot into the one-time-boot menu and update the BIOS flash through there.AUR. See
Alternatively, the BIOS update can be downloaded from the Dell website, and placed in a location accessible to the firmware. This could be the '/boot' folder, or a FAT32 formatted USB stick. Then restart your laptop and hit F12 while starting. In the boot menu choose firmware update and select the new file!
EFISTUB does not boot
The BIOS does not pass any boot parameters to the kernel. Use a UEFI boot loader instead.
Not waking from suspend
Update the BIOS to 1.0.7 to patch this issue.
Power Drain after waking from standby
Some users recognised ~2W more power consumption after waking up from standby. Go to the UEFI Firmware Settings (tap the F2 key when the Dell logo appears) and uncheck the 'Enable Thunderbolt Boot Support'. You may useor AUR to reproduce and check this behaviour yourself.
Popping Sound on headphones/external speakers
Power saving being enabled on the audio chip will cause the hissing and popping to appear.
Have a look at Advanced Linux Sound Architecture/Troubleshooting#Pops when starting and stopping playback and Advanced Linux Sound Architecture/Troubleshooting#Popping sound after resuming from suspension.
If you are using
/etc/default/tlp and disable it.
Unfortunately Dell still did not fix this issue and the sound for my model was very loud. The issue seems to be connected to the graphic card. For some users, it is possible to reduce it a lot by activating frame buffer compression "enable_fbc=1" Intel graphics#Module-based Powersaving Options. The coil whine will then start again under heavy graphic load. For the touchscreen model, this may be very often, due to the high resolution screen. In a similar vein, the display can be run at a lower resolution, again reducing the load on the graphics card.
Freezing after waking from suspend
Installing reported to fix this.AUR is
Continuous hissing sound with headphones
Open alsamixer and set "Headphone Mic Boost" gain to 10 dB (See discussion on reddit). Note that this does reduce the volume slightly.
You may also run the equivalent command:
$ amixer -c PCH cset 'name=Headphone Mic Boost Volume' 1