Dell XPS 15z
|USB 3.0||Not tested|
|System info||Not tested|
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 0df5 (rev ff) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34) 04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 06:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0)
Hangs on boot
Sometimes when boot the laptop with the default kernel it would hang at uevent detection, to prevent this from happening add kernel boot param nox2apic edit /etc/default/grub
Dell XPS 15z has two graphics card installed, Intel integrated graphics card and Nvidia 525m card. Nvidia card is using Optimus technology. Initially, both the Intel integrated graphics and the Nvidia 525m card will be active, consuming a lot of power. Unfortunately, Optimus is currently not supported in Linux by Nvidia driver nor nouveau driver, so you need to install the intel driver and disable Nvidia card.
See Intel for details on using the Intel GPU.
Disabling Nvidia card with acpi_call
The following steps outline one method for disabling the Nvidia card via acpi_call. This will only disable the card. If you wish to use it, use Bumblebee instead. Ensure that have git installed:
# pacman -S git
Obtain a copy of acpi_call:
# git clone http://github.com/mkottman/acpi_call
# cd acpi_call # make
Download this script made by Ubuntu forum member sunilim. Open up the script and modify the line
Close the script, make it executable, and place it in the bin folder
# chmod +x dell.sh # cp dell.sh /usr/bin/dell.sh
Run the script to see that it works
# dell.sh off
To make the solution permanent, open up the file /etc/rc.local and add the following line
sleep 5 && dell.sh off
Another way, which allows to use Optimus technology is via Bumblebee. This program is available from AUR and even provides it's own drivers for Nvidia card, available from AUR as well.
Boot time errors
If you encounter boottime errors with intel, add
intel_agp modules to the
MODULES section in
# MODULES="intel_agp i915"
Then regenerate the initramfs:
# mkinitcpio -p linux
X11: no screen found
Touchpad and Keyboard
Touchpad is fully supported in kernel 3.9 or later. Make sure to install xf86-input-synaptics as well as a program such as synaptiks so that you can customize all of the features.
Keyboard is not working
In case your keyboard is not working after installing Arch, or after upgrading older installation add this to your kernel line:
As mentioned above, this problem shouldn't occur in new installations, although may in some cases of customized installs.
To make the card reader function enter the following command:
# echo 1 > /sys/bus/pci/rescan
This will allow it to auto mount cards until the next reboot