Difference between revisions of "Dell XPS M1330"

From ArchWiki
Jump to: navigation, search
(wikify some external links, use https for archlinux.org)
(Suspend: Remove. From the text and user report in [https://bbs.archlinux.org/viewtopic.php?id=44500 forum topic], issue is fixed in new Nvidia driver.)
 
(28 intermediate revisions by 7 users not shown)
Line 1: Line 1:
 
[[Category:Dell]]
 
[[Category:Dell]]
Dell XPS M1330 works quite well out of the box with Arch and GNU/Linux in general, just like his big brother [[Dell XPS M1530]]. Here you can find (or put !) information to configure your laptop and become a mobile Archer.
+
{{Out of date|references to [[initscripts]]}}
 +
 
 +
Dell XPS M1330 works quite well out of the box with Arch and GNU/Linux in general, just like his big brother Dell XPS M1530.  
  
 
== Sound ==
 
== Sound ==
Line 7: Line 9:
 
I suggest muting the PC speaker using alsamixer, as it makes an annoying squeak otherwise.
 
I suggest muting the PC speaker using alsamixer, as it makes an annoying squeak otherwise.
  
With the current Linux kernel 3.0 and [[Advanced Linux Sound Architecture|ALSA]] 1.0.24, do not mess around with the snd-hda-intel module, like supposed in different Threads ( model=3stack etc. ). Automatic detection works fine.
+
With the current Linux kernel 3.0 and [[ALSA]] 1.0.24, do not mess around with the snd-hda-intel module, like supposed in different Threads ( model=3stack etc. ). Automatic detection works fine.
  
 
== Touchpad Synaptics ==
 
== Touchpad Synaptics ==
Line 15: Line 17:
 
As of today, the device manufacturer is SGS Thomson Microelectronics (you can check with a {{ic|lsusb}}). Install it using [[ThinkFinger]].
 
As of today, the device manufacturer is SGS Thomson Microelectronics (you can check with a {{ic|lsusb}}). Install it using [[ThinkFinger]].
  
If you can't get thinkfinger going, try fprint
+
If you can't get thinkfinger going, try [[fprint]].
 
+
Install {{Pkg|fprint}}.
+
 
+
Add yourself to the scanner group
+
  # gpasswd -a username scanner
+
 
+
Enroll your finger print
+
  $ sudo pam_fprint_enroll
+
 
+
If you want to use your fingerprint with sudo, edit the PAM config file for sudo, {{ic|/etc/pam.d/sudo}}, as follows:
+
 
+
auth    sufficient    pam_fprint.so
+
auth    required    pam_unix.so try_first_pass nullok_secure
+
auth    required    pam_nologin.so
+
 
+
When you do something with sudo, it should ask you to swipe your finger
+
  
 
== Network ==
 
== Network ==
 
==== Ethernet Setup ====
 
==== Ethernet Setup ====
the ethernet card is recognized by the kernel, simply load the network module to use it, or use a connection manager (see [[Wireless Setup]] for a list of programs)
+
the ethernet card is recognized by the kernel, simply load the network module to use it, or use a connection manager (see [[Wireless network configuration]] for a list of programs)
  
 
==== Wireless Setup ====
 
==== Wireless Setup ====
{{Note| M1330 has been shipped with many different wireless chipset. You can find out what your card is with 'hwdetect --show-net' or 'lshwd'. Check also [[Wireless_Setup|Arch Wireless Setup]].}}
+
{{Note| M1330 has been shipped with many different wireless chipset. You can find out what your card is with 'hwdetect --show-net' or 'lshwd'. Check also [[Wireless network configuration]].}}
  
* '''Intel chipset : 4965agn'''
+
* '''Intel chipset: 3945abg or 4965agn'''
This is the most common chipset, the correct wireless driver to install is [[Wireless_Setup#ipw3945_and_ipw4965|iwlwifi-4965-ucode]].<br />
+
The driver is included in the Linux kernel, should work out of the box.
To get the Wi-Fi LED working, you can install {{AUR|compat-wireless}} from [[AUR]]. See this [https://bbs.archlinux.org/viewtopic.php?id=49189 forum thread] (some versions can freeze your system !).
+
 
+
Using [[NetworkManager]] makes the wireless and wired GUI connection interface in GNOME easy. It is possible to disable the annoying 'feature' whereby the GNOME Keyring keeps asking for a password at login by editing {{ic|/etc/pam.d/login}} in addition to the other edits suggested to /etc/pam.d/gdm [[NetworkManager#PolicyKit_issues]]. You can also try deleting ~/.gnome2/keyrings. This is especially useful if you do not use gdm to login, rather login straight from the shell. YMMV if you use [[KDE]] or another DE.
+
 
+
*'''Intel chipset : 3945abg'''
+
The correct wireless driver to install is [[Wireless_Setup#ipw3945_and_ipw4965|iwlwifi-3945-ucode]].
+
  
 
*'''Broadcom chipset : bcm43xx or b43 or bcm4312'''
 
*'''Broadcom chipset : bcm43xx or b43 or bcm4312'''
See [[Wireless_Setup#BCM43XX|this]] or [[Wireless_Setup#b43|this]] or [[Wireless_Setup#broadcom-wl|this]].
+
See [[Broadcom wireless]].
 
+
{{Note|The Broadcom 4310 chipset is unsupported by bcm43xx and b43, but is now supported by the official broadcom driver BCM4312, check [[Broadcom_BCM4312|this]] wiki entry.}}
+
 
+
{{Note|For getting the Dell Wireless 1395 802.11g Mini Card to work (or any other card with the 4310 chipset), I have made a brief [http://eckveldt.blogspot.com/2008/08/installing-broadcom-4310-linux-driver.html guide] for getting this card to work.}}
+
 
+
{{Note|Arch 64 with Dell Wireless 1395 (Broadcom 4312 chipset): Use the bcm4312 driver referenced [[Broadcom_BCM4312|above]], works like a charm with Arch 64. Wireless will be called eth1 instead of wlan0, so be sure to change all references of wlan0 to eth1 (like in Wicd if you're using it.)}}
+
  
 
==== Bluetooth ====
 
==== Bluetooth ====
Line 78: Line 52:
 
A list of utilities for bluetooth managing is present in AUR database.
 
A list of utilities for bluetooth managing is present in AUR database.
  
If the above solutions do not work, for example, your Logitech BT Travel Mouse is detected the first time only, then fails to be detected, you can try removing {{Ic|bluez-utils}} and installing {{Pkg|blueman}} instead.
+
If the above solutions do not work, for example, your Logitech BT Travel Mouse is detected the first time only, then fails to be detected, you can try removing {{Ic|bluez-utils}} and installing [[blueman]] instead.
  
 
== nVidia Graphics ==
 
== nVidia Graphics ==
Line 84: Line 58:
  
 
==== Compiz Fusion ====
 
==== Compiz Fusion ====
Works just great with the nVidia chipset. You might like to tweak the nVidia Powermizer for maximum battery life. I have forced my graphics chipset to the lowest performance level and Compiz-Fusion runs satisfactorily with a little slowdown here and there. [[NVIDIA#Force Powermizer performance level (for laptops)| See this part of the Arch nVidia wiki]] for more details on how to set this up.
+
Works just great with the nVidia chipset. You might like to tweak the nVidia Powermizer for maximum battery life. I have forced my graphics chipset to the lowest performance level and Compiz-Fusion runs satisfactorily with a little slowdown here and there.
  
 
To have better performance with nVidia drivers, you should try "loose binding" in Compiz Fusion (bug with Geforce 8 series). If you use Fusion Icon, just right click it, then "Compiz Options"->"Loose Binding".
 
To have better performance with nVidia drivers, you should try "loose binding" in Compiz Fusion (bug with Geforce 8 series). If you use Fusion Icon, just right click it, then "Compiz Options"->"Loose Binding".
Line 90: Line 64:
 
==== GPU Temperature ====
 
==== GPU Temperature ====
 
Starting with drives > 256.53 the reported GPU Temperature is about 10° higher then before. It *may* be a driver problem resulting in higher battery usage, as higher Temperature = More Power, but it also may be something else. Hope that it doesn't shorten the life of the card. Using the 256.53 driver with Kernels newer X-Servers > 1.10 does not work, so there is a problem.
 
Starting with drives > 256.53 the reported GPU Temperature is about 10° higher then before. It *may* be a driver problem resulting in higher battery usage, as higher Temperature = More Power, but it also may be something else. Hope that it doesn't shorten the life of the card. Using the 256.53 driver with Kernels newer X-Servers > 1.10 does not work, so there is a problem.
 
== Suspend ==
 
{{Note|If you have suspend problems, try [ftp://download.nvidia.com/XFree86/Linux-x86/180.25/ nvidia-prerelease driver 180.25], it seems to solve the problem described below.}}
 
With 180.x series of proprietary NVidia driver, suspend does not work properly, using 177.x series helps but it's slower in 2d rendering. Hibernate also works with 180.x series.
 
 
{{Note|This only works since kernel 2.6.25.x (stock Arch kernel). In former versions, force unloading modules is not provided and you have to recompile your kernel with this option.}}
 
 
With acpi-freq running, you might notice that CPU1 is deactivated after using pm-suspend. To fix this you have to unload acpi-freq module each time pm-suspend is called.
 
 
Put this in {{Ic|/etc/pm/sleep.d/66dummy}}:
 
 
#!/bin/bash
 
case $1 in
 
    suspend)
 
        rmmod -f acpi_cpufreq
 
        ;;
 
    resume)
 
        modprobe acpi_cpufreq
 
        ;;
 
    *)  echo "somebody is calling me totally wrong."
 
        ;;
 
esac
 
 
Then make it executable :
 
# chmod +x /etc/pm/sleep.d/66dummy
 
 
Solution was provided by this [https://bbs.archlinux.org/viewtopic.php?id=44500 forum topic].
 
  
 
== Hard Drive ==
 
== Hard Drive ==
Line 152: Line 99:
  
 
== Webcam ==
 
== Webcam ==
{{Box Note | The uvc modules are now compiled as part of the kernel (as of 2.6.26), so it should no longer be necessary to install uvc separately.}}
+
See [[Webcam setup]] for details.
  
{{Box Note | Some m1330's come without a webcam, or the camera cable may be damaged or have become detached internally. If in doubt (and before pulling your hair out trying to figure out why the camera won't work despite trying every software trick), run the built-in diagnostics (available by pushing 'F12' during the POST screen, then selecting 'Diagnostics'). If no camera is hooked up or the cable is damaged, you'll receive the following message: "Hardware Detect Error - Auxiliary LCD cable not detected."}}
+
Some m1330's come without a webcam, or the camera cable may be damaged or have become detached internally. If in doubt (and before pulling your hair out trying to figure out why the camera won't work despite trying every software trick), run the built-in diagnostics (available by pushing 'F12' during the POST screen, then selecting 'Diagnostics'). If no camera is hooked up or the cable is damaged, you'll receive the following message: "Hardware Detect Error - Auxiliary LCD cable not detected."
  
 
If this is the case, you can try to fix / replace / install the needed hardware according the following:
 
If this is the case, you can try to fix / replace / install the needed hardware according the following:
Line 160: Line 107:
 
[http://support.dell.com/support/edocs/systems/xpsm1330/en/sm/display.htm],  
 
[http://support.dell.com/support/edocs/systems/xpsm1330/en/sm/display.htm],  
 
[http://support.dell.com/support/edocs/systems/xpsm1330/en/sm/camera.htm#wp1084976]
 
[http://support.dell.com/support/edocs/systems/xpsm1330/en/sm/camera.htm#wp1084976]
 
For kernels prior to 2.6.26,you have to install linux-uvc drivers to have a working webcam (works for both VGA webcam from LED display and HD webcam from CCFL display apparently). You can find them [https://aur.archlinux.org/packages.php?ID=6907 in the AUR].
 
 
Then you have to load corresponding modules:
 
# modprobe usbvision
 
# modprobe uvcvideo
 
 
If you want them to be loaded at startup, put usbvision and uvcvideo in the MODULES section of /etc/rc.conf.
 
  
 
== Sensors / Hardware info ==
 
== Sensors / Hardware info ==
Install i8k packages: {{Pkg|i8kmon}} and {{Pkg|i8kutils}}.
+
Install i8k packages: {{AUR|i8kmonitor}}{{Broken package link|{{aur-mirror|i8kmonitor}}}} and {{AUR|i8kutils}}.
  
This will provide many useful information (temperature, fan speed, BIOS...) and utilities (fan monitor, BIOS update...). For CPU temps, use [[Lm sensors]].
+
This will provide many useful information (temperature, fan speed, BIOS...) and utilities (fan monitor, BIOS update...). For CPU temps, use [[lm_sensors]].
  
 
== Extra media keys ==
 
== Extra media keys ==
* They are recognized by default with evdev so you can directly bind them.
 
 
If you use GNOME, go in System->Preferences->Keyboard Shortcuts.
 
 
The remote control should work fine too.
 
 
* If you are not using evdev you can still map those keys with xmodmap.
 
 
First you need to identify the corresponding keycodes, for instance, running xev, and map them with an {{ic|~/.Xmodmap}} file. Here is my {{ic|~/.Xmodmap}} file that you can copy (it may not work on your own machine - try [[Hotkeys#Using_xev|xev]] first):
 
 
keycode 144 = XF86AudioPrev
 
keycode 153 = XF86AudioNext
 
keycode 160 = XF86AudioMute
 
keycode 162 = XF86AudioPause
 
keycode 164 = XF86AudioStop
 
keycode 174 = XF86AudioLowerVolume
 
keycode 176 = XF86AudioRaiseVolume
 
keycode 222 = XF86PowerDown
 
 
You can now load the mappings with:
 
 
xmodmap ~/.Xmodmap
 
 
If you are using a lightweight window manager like Openbox or Awesome then you might want to use xbindkeys to set the mapped keys to functions like so:
 
<pre>
 
"amixer set Master mute"
 
    m:0x0 + c:121
 
    XF86AudioMute
 
"amixer set Master 1dB+ unmute"
 
    m:0x0 + c:122
 
    XF86AudioLowerVolume
 
"amixer set Master 1dB+ unmute"
 
    m:0x0 + c:123
 
    XF86AudioRaiseVolume
 
</pre>
 
 
Now use ''xbindkeys -mk'' to get your own codes and assign functions to them and put them in .xbindkeysrc and also load xmodmap and xbindkeys in your .xinitrc:
 
<pre>
 
xmodmap $HOME/.Xmodmap &
 
xbindkeys &
 
</pre>
 
 
If you are running XFCE, you'll notice that XF86AudioLowerVolume, XF86AudioRaiseVolume and XF86AudioMute are binded to the aumix command. So you'll need to install it (package {{Pkg|aumix-gtk}}).
 
 
Or remap them to something like this "amixer sset PCM 5+" for instance.
 
 
* KDE 3.5.x/4.x.x.
 
First of all in KDE you can enable the multimedia keys by choosing the "Dell Laptop/notebook 6xxx/8xxx" layout in System Settings -> Regional and Language -> Keyboard Layout. Alternatively, you can disable keyboard layouts in KDE and add the following in the "InputDevice" section for your keyboard:
 
 
Option        "XkbLayout" <your preferred language here, e.g., "us">
 
Option        "XkbModel" "inspiron"
 
Option        "XkbRules" "xorg"
 
#Option        "XkbVariant" "nodeadkeys" # Variant options, if you need them
 
 
Next, you can bind the multimedia-key actions to your needs with Keyboard Shortcuts in System Settings (different places depending on KDE version), e.g., in KMix bind "Toggle Mute - Front, HDA Intel" to the mute button etc..
 
 
*In KDE 3.5.x/4.x.x I experience the multimedia keys repeat 2-4 times on each keypress.
 
This may apply to other DE's as well.
 
 
The problem is related to the autorepeat settings for the keyboard, as each keypress on the multimedia-keys lasts ~660ms, which is below the default keyrepeat hold-time setting.
 
 
Add the following setting to the "InputDevice" section for your keyboard:
 
 
Option        "AutoRepeat" "700 20" # First time is the hold-time in ms before autorepeat starts,
 
                                      # second is the repeats per second.
 
                                      # Experiment with hold-times of ~680-700ms to find the lowest possible.
 
 
In KDE 3.5.x the autorepeat settings can be set in System Settings instead. I think the KDE 4.x.x system (needs confirmation) does not agree to the autorepeat setting in xorg.conf and you cannot set them in System Settings currently (<= 4.1.2).
 
 
In my case (KDE 4.x.x), the autorepeat still makes the auto-repeat activate when pressing the multimedia keys. I found out though, that the setting in gnome-control-center -> Keyboard -> Repeat Keys settings actually make the multimedia keys work as they should, after adjusting the Delay slider. Even on the default setting, they work, the GNOME settings just have to be activated, which gnome-settings-daemon may take care of. Thus, add gnome-settings-daemon to you autostarts in KDE and you have nice auto-repeat settings and your multimedia keys actually work!
 
  
The latter feature/bug? with the gnome-control-center fixing it, lost my attention for a long while, so I hope this can help others solving this annoyance faster.
+
See [[Extra keyboard keys]].
  
 
== BIOS ==
 
== BIOS ==
 
{{Note| Updating your BIOS is always a dangerous operation (even if it is safer on a laptop with a battery). '''Perform it at your own risks.'''}}
 
{{Note| Updating your BIOS is always a dangerous operation (even if it is safer on a laptop with a battery). '''Perform it at your own risks.'''}}
  
You can perform BIOS updates under GNU/Linux! Just install {{pkg|i8kutils}}!
+
You can perform BIOS updates under GNU/Linux! Just install {{AUR|i8kutils}}!
  
 
Download latest BIOS (A15) [http://linux.dell.com/repo/firmware/bios-hdrs/system_bios_ven_0x1028_dev_0x0209_version_a15/bios.hdr here (.hdr file)]. This BIOS is for device ID 0x0209. You can check your device ID by installing {{pkg|libsmbios}} and then running:
 
Download latest BIOS (A15) [http://linux.dell.com/repo/firmware/bios-hdrs/system_bios_ven_0x1028_dev_0x0209_version_a15/bios.hdr here (.hdr file)]. This BIOS is for device ID 0x0209. You can check your device ID by installing {{pkg|libsmbios}} and then running:
Line 284: Line 153:
  
 
'''A15''' : ''Jan '09''
 
'''A15''' : ''Jan '09''
* Enhance {{Keypress|Fn+F8}} function (probably only for Intel integrated graphics)
+
* Enhance {{ic|Fn+F8}} function (probably only for Intel integrated graphics)
 
* Support for 8GB memory is... back!
 
* Support for 8GB memory is... back!
  

Latest revision as of 08:31, 29 March 2016

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: references to initscripts (Discuss in Talk:Dell XPS M1330#)

Dell XPS M1330 works quite well out of the box with Arch and GNU/Linux in general, just like his big brother Dell XPS M1530.

Sound

Sound should now work out of the box. Just be sure to unmute all channels in alsamixer. To get the microphone working, you may have to change the digital input source (right now I have Digital Mic 1 but this could change in a new alsa version).

I suggest muting the PC speaker using alsamixer, as it makes an annoying squeak otherwise.

With the current Linux kernel 3.0 and ALSA 1.0.24, do not mess around with the snd-hda-intel module, like supposed in different Threads ( model=3stack etc. ). Automatic detection works fine.

Touchpad Synaptics

To configure the touchpad, you can refer to: Touchpad Synaptics Page.

Fingerprint reader

As of today, the device manufacturer is SGS Thomson Microelectronics (you can check with a lsusb). Install it using ThinkFinger.

If you can't get thinkfinger going, try fprint.

Network

Ethernet Setup

the ethernet card is recognized by the kernel, simply load the network module to use it, or use a connection manager (see Wireless network configuration for a list of programs)

Wireless Setup

Note: M1330 has been shipped with many different wireless chipset. You can find out what your card is with 'hwdetect --show-net' or 'lshwd'. Check also Wireless network configuration.
  • Intel chipset: 3945abg or 4965agn

The driver is included in the Linux kernel, should work out of the box.

  • Broadcom chipset : bcm43xx or b43 or bcm4312

See Broadcom wireless.

Bluetooth

Warning: If you have had Windows Vista installed, MAKE SURE YOU SWITCH THE BLUETOOTH MODULE 'ON' IN VISTA! Failure to do this can render the bluetooth device (Wireless 355 Bluetooth Module) unuseable in Arch or any other O/S such as Windows 7 or XP. This is despite enabling the module in the BIOS, or even reflashing the BIOS. The Bluetooth module remains firmly 'off'. Annoying.

Before taking drastic measures however, ensure the transmitter switch is 'On' - it's the switch on the right-hand side of the laptop next to the slot loading DVD Drive. If this switch is 'off' then wifi won't work either.

If you're unfortunate to find yourself with Arch installed and a 'switched off' bluetooth device your only solution may be to reinstall Vista and switch the module back on before re-installing Linux. You can safely delete Vista again once you have switched the module back on. Another option is to install Windows 7 or XP then re-enable the module using the Dell patch (R159805.EXE) as described here: http://codereflect.com/2009/01/17/what-you-can-do-if-your-dell-laptop-doesnt-show-bluetooth-device-after-re-installing-windows-vista/

Once you've enabled your Bluetooth module, you can then install the relevant software.

Install bluez-utils & bluez-libs from extra repository.

Edit /etc/conf.d/bluetooth:

DAEMON_ENABLE="true"
HIDD_ENABLE="true"

Restart bluetooth service:

# rc.d restart bluetooth

A list of utilities for bluetooth managing is present in AUR database.

If the above solutions do not work, for example, your Logitech BT Travel Mouse is detected the first time only, then fails to be detected, you can try removing bluez-utils and installing blueman instead.

nVidia Graphics

For those of you with the nVidia 8400GM chipset, using the nVidia driver package works fine.

Compiz Fusion

Works just great with the nVidia chipset. You might like to tweak the nVidia Powermizer for maximum battery life. I have forced my graphics chipset to the lowest performance level and Compiz-Fusion runs satisfactorily with a little slowdown here and there.

To have better performance with nVidia drivers, you should try "loose binding" in Compiz Fusion (bug with Geforce 8 series). If you use Fusion Icon, just right click it, then "Compiz Options"->"Loose Binding".

GPU Temperature

Starting with drives > 256.53 the reported GPU Temperature is about 10° higher then before. It *may* be a driver problem resulting in higher battery usage, as higher Temperature = More Power, but it also may be something else. Hope that it doesn't shorten the life of the card. Using the 256.53 driver with Kernels newer X-Servers > 1.10 does not work, so there is a problem.

Hard Drive

If your hard drive clicks regurlarly, you may suffer from this problem. To fix it, add these lines to your /etc/rc.local:

hdparm -B 254 /dev/sdX >> /dev/null

or :

hdparm -B 224 /dev/sdX >> /dev/null

(replace X in sdX by the letter of your drive, e.g. sda)

When resuming from a pm-suspend, you might notice that the hard drive is clicking again. To fix this, modify your /etc/pm/sleep.d/66dummy to put the lines above. Following the last example in previous suspend section:

case $1 in
    suspend)
        rmmod -f acpi_cpufreq
        ;;
    resume)
        modprobe acpi_cpufreq
        hdparm -B 224 /dev/sda >> /dev/null
        ;;
    *)  echo "somebody is calling me totally wrong."
        ;;
esac

If not already done, make the file executable.

SD Card Reader

The device is recognized by the kernel. The Adapter module is: sdhci

The card will be availabe for mounting under the device:

/dev/mmcblk0p1

Webcam

See Webcam setup for details.

Some m1330's come without a webcam, or the camera cable may be damaged or have become detached internally. If in doubt (and before pulling your hair out trying to figure out why the camera won't work despite trying every software trick), run the built-in diagnostics (available by pushing 'F12' during the POST screen, then selecting 'Diagnostics'). If no camera is hooked up or the cable is damaged, you'll receive the following message: "Hardware Detect Error - Auxiliary LCD cable not detected."

If this is the case, you can try to fix / replace / install the needed hardware according the following: [1], [2], [3]

Sensors / Hardware info

Install i8k packages: i8kmonitorAUR[broken link: archived in aur-mirror] and i8kutilsAUR.

This will provide many useful information (temperature, fan speed, BIOS...) and utilities (fan monitor, BIOS update...). For CPU temps, use lm_sensors.

Extra media keys

See Extra keyboard keys.

BIOS

Note: Updating your BIOS is always a dangerous operation (even if it is safer on a laptop with a battery). Perform it at your own risks.

You can perform BIOS updates under GNU/Linux! Just install i8kutilsAUR!

Download latest BIOS (A15) here (.hdr file). This BIOS is for device ID 0x0209. You can check your device ID by installing libsmbios and then running:

smbios-sys-info-lite

You can find other bios fitting your system ID there.

Then go in the directory where you downloaded the BIOS file and type as root:

modprobe dell_rbu
dellBiosUpdate-combat -u -f bios.hdr

Reboot, stare at the white frightening screen saying "BIOS update" for an endless minute. Listen to the sweet vacuum-like full speed sound of your fans just before it reboots automatically. Then observe the boot screen with Dell logo displayed much longer than usual. Sweep the sweat on your forehead. You are done!

History of BIOS Revisions

Check this thread from NoteBook Review for detailed info.

A10 : May '08

  • The only enhancement I noticed with this bios is that you can now eject a CD/DVD without freezing your system (this was really a weird behaviour !). Please upgrade to A11 or A12 if you are currently using A10 !

A11 : Jun '08

A12 : Jul '08

  • Other thermal enhancements. Temperatures are lower for me but the fan is always running.

A13 : Oct '08 (removed-from-the-official-list)

  • Added support for new versions of Intel CPUs.
  • Added support for 8GB memory.

A14 : Nov '08

  • Added enhancement for Wifi sniffer function.

A15 : Jan '09

  • Enhance Fn+F8 function (probably only for Intel integrated graphics)
  • Support for 8GB memory is... back!

Battery Usage

I have been monitoring the battery usage for while. Test setting is quite easy: Get as Low as Possible with display on and X-Server running, values are reported by Powertop.

Kernel 3.4.4-3-ARCH and NVidia Driver 304.37, 2,4 Ghz undervolted, Crucial M4 SSD, 9,75 W. Device is 5 years old now.
Kernel 3.0-ARCH and NVidia Driver 275.xx 2,4 Ghz, OCZ SSD, pci_aspm=force on kernel line, 10,8 W. Guess that is near the technical minimum.
Kernel 2.6.37-ARCH and NVidia Driver 270.xx, 2.4 Ghz, OCZ SSD: 11,6 W
Kernel 2.6.36-ARCH and NVidia Driver 256.xx, 1.8 Ghz, Samsung HDD: 11,0 W

External Resources

This page describes all of the various driver modules required to make the hardware in the XPS M1330 work.

French speaking people can also refer to these articles.