Dell XPS M1330
Dell XPS M1330 works quite well out of the box with Arch and GNU/Linux in general, just like his big brother Dell XPS M1530. Here you can find (or put !) information to configure your laptop and become a mobile Archer.
- 1 Sound
- 2 Touchpad Synaptics
- 3 Fingerprint reader
- 4 Network
- 5 nVidia Graphics
- 6 Suspend
- 7 Hard Drive
- 8 SD Card Reader
- 9 Webcam
- 10 Sensors / Hardware info
- 11 Extra media keys
- 12 BIOS
- 13 Battery Usage
- 14 External Resources
Sound should now work out of the box. Just be sure to unmute all channels in alsamixer. To get the microphone working, you may have to change the digital input source (right now I have Digital Mic 1 but this could change in a new alsa version).
I suggest muting the PC speaker using alsamixer, as it makes an annoying squeak otherwise.
With the current Linux kernel 3.0 and ALSA 1.0.24, do not mess around with the snd-hda-intel module, like supposed in different Threads ( model=3stack etc. ). Automatic detection works fine.
To configure the touchpad, you can refer to: Touchpad Synaptics Page.
As of today, the device manufacturer is SGS Thomson Microelectronics (you can check with a
lsusb). Install it using ThinkFinger.
If you can't get thinkfinger going, try fprint
Add yourself to the scanner group
# gpasswd -a username scanner
Enroll your finger print
$ sudo pam_fprint_enroll
If you want to use your fingerprint with sudo, edit the PAM config file for sudo,
/etc/pam.d/sudo, as follows:
auth sufficient pam_fprint.so auth required pam_unix.so try_first_pass nullok_secure auth required pam_nologin.so
When you do something with sudo, it should ask you to swipe your finger
the ethernet card is recognized by the kernel, simply load the network module to use it, or use a connection manager (see Wireless Setup for a list of programs)
- Intel chipset : 4965agn
This is the most common chipset, the correct wireless driver to install is iwlwifi-4965-ucode.
To get the Wi-Fi LED working, you can install AUR from AUR. See this forum thread (some versions can freeze your system !).
Using NetworkManager makes the wireless and wired GUI connection interface in GNOME easy. It is possible to disable the annoying 'feature' whereby the GNOME Keyring keeps asking for a password at login by editing
/etc/pam.d/login in addition to the other edits suggested to /etc/pam.d/gdm NetworkManager#PolicyKit_issues. You can also try deleting ~/.gnome2/keyrings. This is especially useful if you do not use gdm to login, rather login straight from the shell. YMMV if you use KDE or another DE.
- Intel chipset : 3945abg
The correct wireless driver to install is iwlwifi-3945-ucode.
- Broadcom chipset : bcm43xx or b43 or bcm4312
Before taking drastic measures however, ensure the transmitter switch is 'On' - it's the switch on the right-hand side of the laptop next to the slot loading DVD Drive. If this switch is 'off' then wifi won't work either.If you're unfortunate to find yourself with Arch installed and a 'switched off' bluetooth device your only solution may be to reinstall Vista and switch the module back on before re-installing Linux. You can safely delete Vista again once you have switched the module back on. Another option is to install Windows 7 or XP then re-enable the module using the Dell patch (R159805.EXE) as described here: http://codereflect.com/2009/01/17/what-you-can-do-if-your-dell-laptop-doesnt-show-bluetooth-device-after-re-installing-windows-vista/
Once you've enabled your Bluetooth module, you can then install the relevant software.
Install& from extra repository.
Restart bluetooth service:
# rc.d restart bluetooth
A list of utilities for bluetooth managing is present in AUR database.
If the above solutions do not work, for example, your Logitech BT Travel Mouse is detected the first time only, then fails to be detected, you can try removing
bluez-utils and installing instead.
For those of you with the nVidia 8400GM chipset, using the nVidia driver package works fine.
Works just great with the nVidia chipset. You might like to tweak the nVidia Powermizer for maximum battery life. I have forced my graphics chipset to the lowest performance level and Compiz-Fusion runs satisfactorily with a little slowdown here and there. See this part of the Arch nVidia wiki for more details on how to set this up.
To have better performance with nVidia drivers, you should try "loose binding" in Compiz Fusion (bug with Geforce 8 series). If you use Fusion Icon, just right click it, then "Compiz Options"->"Loose Binding".
Starting with drives > 256.53 the reported GPU Temperature is about 10° higher then before. It *may* be a driver problem resulting in higher battery usage, as higher Temperature = More Power, but it also may be something else. Hope that it doesn't shorten the life of the card. Using the 256.53 driver with Kernels newer X-Servers > 1.10 does not work, so there is a problem.
With 180.x series of proprietary NVidia driver, suspend does not work properly, using 177.x series helps but it's slower in 2d rendering. Hibernate also works with 180.x series.
With acpi-freq running, you might notice that CPU1 is deactivated after using pm-suspend. To fix this you have to unload acpi-freq module each time pm-suspend is called.
Put this in
#!/bin/bash case $1 in suspend) rmmod -f acpi_cpufreq ;; resume) modprobe acpi_cpufreq ;; *) echo "somebody is calling me totally wrong." ;; esac
Then make it executable :
# chmod +x /etc/pm/sleep.d/66dummy
Solution was provided by this forum topic.
If your hard drive clicks regurlarly, you may suffer from this problem. To fix it, add these lines to your
hdparm -B 254 /dev/sdX >> /dev/null
hdparm -B 224 /dev/sdX >> /dev/null
(replace X in
sdX by the letter of your drive, e.g.
When resuming from a pm-suspend, you might notice that the hard drive is clicking again. To fix this, modify your
/etc/pm/sleep.d/66dummy to put the lines above. Following the last example in previous suspend section:
case $1 in suspend) rmmod -f acpi_cpufreq ;; resume) modprobe acpi_cpufreq hdparm -B 224 /dev/sda >> /dev/null ;; *) echo "somebody is calling me totally wrong." ;; esac
If not already done, make the file executable.
SD Card Reader
The device is recognized by the kernel. The Adapter module is: sdhci
The card will be availabe for mounting under the device:
For kernels prior to 2.6.26,you have to install linux-uvc drivers to have a working webcam (works for both VGA webcam from LED display and HD webcam from CCFL display apparently). You can find them in the AUR.
Then you have to load corresponding modules:
# modprobe usbvision # modprobe uvcvideo
If you want them to be loaded at startup, put usbvision and uvcvideo in the MODULES section of /etc/rc.conf.
UPDATE June 2013: You may find your webcam no longer working. The uvcvideo module fails to load properly.
A workaround is simply to add the following to /etc/modprobe.d/uvcvideo.conf:
options uvcvideo quirks=0x100
Sensors / Hardware info
Install i8k packages:and .
This will provide many useful information (temperature, fan speed, BIOS...) and utilities (fan monitor, BIOS update...). For CPU temps, use Lm sensors.
Extra media keys
- They are recognized by default with evdev so you can directly bind them.
If you use GNOME, go in System->Preferences->Keyboard Shortcuts.
The remote control should work fine too.
- If you are not using evdev you can still map those keys with xmodmap.
First you need to identify the corresponding keycodes, for instance, running xev, and map them with an
~/.Xmodmap file. Here is my
~/.Xmodmap file that you can copy (it may not work on your own machine - try xev first):
keycode 144 = XF86AudioPrev keycode 153 = XF86AudioNext keycode 160 = XF86AudioMute keycode 162 = XF86AudioPause keycode 164 = XF86AudioStop keycode 174 = XF86AudioLowerVolume keycode 176 = XF86AudioRaiseVolume keycode 222 = XF86PowerDown
You can now load the mappings with:
If you are using a lightweight window manager like Openbox or Awesome then you might want to use xbindkeys to set the mapped keys to functions like so:
"amixer set Master mute" m:0x0 + c:121 XF86AudioMute "amixer set Master 1dB+ unmute" m:0x0 + c:122 XF86AudioLowerVolume "amixer set Master 1dB+ unmute" m:0x0 + c:123 XF86AudioRaiseVolume
Now use xbindkeys -mk to get your own codes and assign functions to them and put them in .xbindkeysrc and also load xmodmap and xbindkeys in your .xinitrc:
xmodmap $HOME/.Xmodmap & xbindkeys &
If you are running XFCE, you'll notice that XF86AudioLowerVolume, XF86AudioRaiseVolume and XF86AudioMute are binded to the aumix command. So you'll need to install it (package).
Or remap them to something like this "amixer sset PCM 5+" for instance.
- KDE 3.5.x/4.x.x.
First of all in KDE you can enable the multimedia keys by choosing the "Dell Laptop/notebook 6xxx/8xxx" layout in System Settings -> Regional and Language -> Keyboard Layout. Alternatively, you can disable keyboard layouts in KDE and add the following in the "InputDevice" section for your keyboard:
Option "XkbLayout" <your preferred language here, e.g., "us"> Option "XkbModel" "inspiron" Option "XkbRules" "xorg" #Option "XkbVariant" "nodeadkeys" # Variant options, if you need them
Next, you can bind the multimedia-key actions to your needs with Keyboard Shortcuts in System Settings (different places depending on KDE version), e.g., in KMix bind "Toggle Mute - Front, HDA Intel" to the mute button etc..
- In KDE 3.5.x/4.x.x I experience the multimedia keys repeat 2-4 times on each keypress.
This may apply to other DE's as well.
The problem is related to the autorepeat settings for the keyboard, as each keypress on the multimedia-keys lasts ~660ms, which is below the default keyrepeat hold-time setting.
Add the following setting to the "InputDevice" section for your keyboard:
Option "AutoRepeat" "700 20" # First time is the hold-time in ms before autorepeat starts, # second is the repeats per second. # Experiment with hold-times of ~680-700ms to find the lowest possible.
In KDE 3.5.x the autorepeat settings can be set in System Settings instead. I think the KDE 4.x.x system (needs confirmation) does not agree to the autorepeat setting in xorg.conf and you cannot set them in System Settings currently (<= 4.1.2).
In my case (KDE 4.x.x), the autorepeat still makes the auto-repeat activate when pressing the multimedia keys. I found out though, that the setting in gnome-control-center -> Keyboard -> Repeat Keys settings actually make the multimedia keys work as they should, after adjusting the Delay slider. Even on the default setting, they work, the GNOME settings just have to be activated, which gnome-settings-daemon may take care of. Thus, add gnome-settings-daemon to you autostarts in KDE and you have nice auto-repeat settings and your multimedia keys actually work!
The latter feature/bug? with the gnome-control-center fixing it, lost my attention for a long while, so I hope this can help others solving this annoyance faster.
You can perform BIOS updates under GNU/Linux! Just install!
Download latest BIOS (A15) here (.hdr file). This BIOS is for device ID 0x0209. You can check your device ID by installing and then running:
You can find other bios fitting your system ID there.
Then go in the directory where you downloaded the BIOS file and type as root:
dellBiosUpdate-combat -u -f bios.hdr
Reboot, stare at the white frightening screen saying "BIOS update" for an endless minute. Listen to the sweet vacuum-like full speed sound of your fans just before it reboots automatically. Then observe the boot screen with Dell logo displayed much longer than usual. Sweep the sweat on your forehead. You are done!
History of BIOS Revisions
Check this thread from NoteBook Review for detailed info.
A10 : May '08
- The only enhancement I noticed with this bios is that you can now eject a CD/DVD without freezing your system (this was really a weird behaviour !). Please upgrade to A11 or A12 if you are currently using A10 !
A11 : Jun '08
- Fixing overheating issues introduced with A10 bios.
A12 : Jul '08
- Other thermal enhancements. Temperatures are lower for me but the fan is always running.
A13 : Oct '08 (removed-from-the-official-list)
- Added support for new versions of Intel CPUs.
- Added support for 8GB memory.
A14 : Nov '08
- Added enhancement for Wifi sniffer function.
A15 : Jan '09
Fn+F8function (probably only for Intel integrated graphics)
- Support for 8GB memory is... back!
I have been monitoring the battery usage for while. Test setting is quite easy: Get as Low as Possible with display on and X-Server running, values are reported by Powertop.
Kernel 3.4.4-3-ARCH and NVidia Driver 304.37, 2,4 Ghz undervolted, Crucial M4 SSD, 9,75 W. Device is 5 years old now. Kernel 3.0-ARCH and NVidia Driver 275.xx 2,4 Ghz, OCZ SSD, pci_aspm=force on kernel line, 10,8 W. Guess that is near the technical minimum. Kernel 2.6.37-ARCH and NVidia Driver 270.xx, 2.4 Ghz, OCZ SSD: 11,6 W Kernel 2.6.36-ARCH and NVidia Driver 256.xx, 1.8 Ghz, Samsung HDD: 11,0 W
This page describes all of the various driver modules required to make the hardware in the XPS M1330 work.
French speaking people can also refer to these articles.