Difference between revisions of "Deluge"

From ArchWiki
Jump to: navigation, search
(Deluge-Web (Optional))
Line 102: Line 102:
The CLI client {{ic|/usr/bin/deluge-consle}} can also be used to connect to a running daemon.  Invoke it from a shell.  To connect, simply type:
The CLI client {{ic|/usr/bin/deluge-consle}} can also be used to connect to a running daemon.  Invoke it from a shell.  To connect, simply type:
  connect localhost delugeuser p422WoRd:10
  connect localhost delugeuser p422WoRd:10
In case you want SSL for the web UI, you need to generate a new cert/key set. To do this, first stop the web UI daemon and then append to {{ic|/srv/deluge/.config/deluge/ssl/}}:
# openssl req -new -x509 -nodes -out deluge.cert.pem -keyout deluge.key.pem
Next you need to edit {{ic|/srv/deluge/.config/deluge/web.conf}} and change the '''pkey''' and '''cert''' configuration directives to use your new self-signed certificates and also enable SSL:
"pkey": "ssl/deluge.key.pem",
"cert": "ssl/deluge.cert.pem",
"https": true,
Afterwards just start the web UI daemon again.
====Apache configuration====
As of this writing, it is possible to use ProxyPass and ProxyPassReverse with Apache to run your Deluge web UI with a web server. To do so, add the following lines to your {{ic|httpd.conf}}.
Uncomment the Virtual Hosts line:
Include conf/extra/httpd-vhosts.conf
That is all the editing that needs to be done for the {{ic|httpd.conf}}. Next, navigate to the {{ic|extra/}} folder and edit the {{ic|httpd-vhosts.conf}} file. Append to the file, the following:
{{bc|<VirtualHost *:80>
    ServerAlias subdomain.example.com
    ProxyRequests off
    ProxyPass /
    ProxyPassReverse /

Revision as of 16:03, 1 January 2013

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary end


deluge is available from the official repositories.

# pacman -S deluge

The gtk UI requires additional dependencies as does the webui. Inspect the pacman output to determine which are right for the intended application.

python2-notify: libnotify notifications
pygtk: needed for gtk ui
librsvg: needed for gtk ui
python2-mako: needed for web ui

Daemon Setup

Deluge can run as a system daemon which is accessible to any system user or it can run in a non-daemon mode. The focus of this article is on the daemon mode of operation.

Note: Advanced users are free to edit the configuration files in the deluge daemon home directory /srv/deluge/.config/ manually or from the /usr/bin/deluge-console. The rest of this guide is written using the gtk client to do this from convenience of a GUI.

Start the deluge backend daemon like any other systemd service:

# systemd start deluged

Create a User

To allow interaction with the daemon, create a user:password:level in /srv/deluge/.config/deluge/auth. For example:

# echo "delugeuser:p422WoRd:10" >> /srv/deluge/.config/deluge/auth
Note: The user/password created does not have to match any system users... and to maintain good security practices it should NOT!

The number 10 corresponds to a level of 'Admin.' Refer to the following table for additional values:

Level Name Level Value
None 0
Read Only 1
Normal 5
Admin 10
Note: In Deluge 1.35, these values have no effect, but multiuser options are under development.

Define Options

  1. Load the gtk client /usr/bin/deluge-gtk
  2. Disable classic mode from the Edit>Preferences>Interface.

A restart of the client is required for these changes to take effect. Exit the client and reload it.

  1. Setup the client to point to the daemon from Edit>Connection Manager.
  2. Delete the dummy server by hightlighting it and clicking the "Remove" button.
  3. Create an entry to the daemon via the "Add" button populating the resulting dialog with either the IP address or the word "localhost" as the hostname. Populate the "Username" and "Password" fields with the username and password used in the daemons setup. and then click the "+ Add" button.
Hostname: localhost
Username: delugeuser
Password: p422WoRd:10

If the correct credentials were populated, a green light should appear options for interaction adjacent to the name of the server. To connect, hit the "Connect" button.

Users can now configure their server from the GUI. Most of the options are self explanatory and intuitive. More details are available on the official Deluge wiki for details.

Note: When defining paths under Preferences>Downloads make sure that the the deluge user has read/write access to whatever is defined. Remember that the daemon is running as system user deluge in system group deluge!
Note: If the expectation exists to allow access from other machines, be sure to enable Preferences>Daemon>Connections>Allow Remote Connections.

Interacting with the Daemon

As previously mentioned, users have three options to connect to the daemon:

  1. Deluge-GTK
  2. Deluge-Web
  3. Deluge-console

The gtk client has already been covered in the previous section.

Deluge-Web (Optional)

Warning: Running the web client without encryption can be a bad idea. It is therefore recommended that users enable https.

To enable encrypted connections to/from the daemon, simply edit the https variable in /srv/deluge/.config/deluge/web.conf changing the default value of false to true as shown:

"https": true,

Take note of the doublequotes and the trailing comma!

To run the web ui, simply start the web-daemon:

# systemctl start deluge-web

Point a browser to http://localhost:8112. Substitute the word localhost with an IP address if the server is elsewhere. When asked for a password, enter "deluge" as it is the default password.

The preferences in the web UI is highly similar to the gtk UI. As explained in the previous section, edit the connection manager and define an entry to the daemon using the same credentials used in the setup step. Once finished, users are free to remove the dummy server entry.

Hostname: localhost
Username: delugeuser
Password: p422WoRd:10

Deluge-Console (Optional)

The CLI client /usr/bin/deluge-consle can also be used to connect to a running daemon. Invoke it from a shell. To connect, simply type:

connect localhost delugeuser p422WoRd:10


Magnet Links Are Broken with Chromium

The following command should return "deluge.desktop":

$ xdg-mime query default "x-scheme-handler/magnet"

If it returns a null, run this command:

$ xdg-mime default deluge.desktop application/x-bittorrent x-scheme-handler/magnet

Reference: https://bugs.archlinux.org/task/28011

Downloads don't start

As of libtorrent-rasterbar version 0.16, Deluge will not download torrents that are added by a magnet link.

Downgrading libtorrent-rasterbar to 1:0.16.3-1 should fix it. Use the following PKGBUILD: https://projects.archlinux.org/svntogit/packages.git/tree/trunk?h=packages/libtorrent-rasterbar&id=da6a845f1f66026c2e0df71e8728ab0d8fd660b0

Web UI doesn't store settings

For some yet unknown reason, the web interface with Deluge 1.3.3 refuses to properly store the incoming (listen) ports configuration. This can manually be edited in core.conf. The Deluge bugtracker mentions this is fixed, it is not in 1.3.3.

 "enc_prefer_rc4": true, 
 "listen_ports": [
 "dht": false, 

Daemon won't start on fresh install

There seems to be an issue creating a folder with the correct permissions when the package installs, try:

# chmod u+x /srv/deluge