Difference between revisions of "DeveloperWiki:Building in a Clean Chroot"

From ArchWiki
Jump to: navigation, search
(Handling Major Rebuilds)
(Remove [core] from the table.)
(29 intermediate revisions by 13 users not shown)
Line 1: Line 1:
 +
[[Category: DeveloperWiki]]
 +
 
= Introduction =
 
= Introduction =
  
Line 5: Line 7:
 
= Why =
 
= Why =
  
Building in a clean chroot prevents missing dependancies in packages, whether due to unwanted linking or packages missing in the depends array in the PKGBUILD.  It also allows you to build a package for the stable repositories (core, extra, community) while having packages from [testing] installed on your system.
+
Building in a clean chroot prevents missing dependencies in packages, whether due to unwanted linking or packages missing in the depends array in the PKGBUILD.  It also allows users to build a package for the stable repositories (core, extra, community) while having packages from [testing] installed.
  
= Setting Up A Chroot =
+
= Convenience Way =
 +
To quickly build a package in a chroot without any further tinkering, one can use the helper scripts from the devtools package.
  
The devtools package provides tools for creating and building within clean chroots. To make a clean chroot, firstly create the directory you want it to reside in. For the purposes of this article this will be called <chrootdir>. The create your chroot using
+
These helper scripts should be called in the same directory where the PKGBUILD is, just like with makepkg. For instance, {{ic|extra-i686-build}} automatically sets up chroot in {{ic|/var/lib/archbuild}}, updates it, and builds a package for the extra repository. For multilib builds there is just {{ic|multilib-build}} without an architecture.
  
sudo mkarchroot -C <pacman.conf> -M <makepkg.conf> <chrootdir>/root base base-devel sudo
+
{{Tip|Consult the table below for information on which script to use when building for a specific repository and architecture.}}
  
The -C and -M flags are optional, but it is recommended to provide these with clean pacman.conf and makepkg.conf files (directly from the pacman package) during first creation of clean chroot to ensure lack of user specific adjustments.
+
{{Note|[core] is omitted because those packages are required to go through [testing] first before landing in [core].}}
  
Edit the <chrootdir>/root/etc/makepkg.conf file to set the packager name and any makeflags.  Also adjust the mirror list in <chrootdir>/root/etc/pacman.d/mirrorlist and enable [testing] in <chrootdir>/root/etc/pacman.conf if wanted.
+
{| class="wikitable"
 +
! Target repository || Architecture || Build script to use
 +
|-
 +
| extra / community || i686 || extra-i686-build
 +
|-
 +
| extra / community || x86_64 || extra-x86_64-build
 +
|-
 +
| testing / community-testing || i686 || testing-i686-build
 +
|-
 +
| testing / community-testing || x86_64 || testing-x86_64-build
 +
|-
 +
| staging / community-staging || i686 || staging-i686-build
 +
|-
 +
| staging / community-staging || x86_64 || staging-x86_64-build
 +
|-
 +
| multilib || x86_64 || multilib-build
 +
|-
 +
| multilib-testing || x86_64 || multilib-testing-build
 +
|-
 +
| multilib-staging || x86_64 || multilib-staging-build
 +
|}
  
= Building in the Chroot =
+
= Classic Way =
 +
== Setting Up A Chroot ==
  
Firstly, make sure your chroot is up to date with:
+
The devtools package provides tools for creating and building within clean chroots. Install it if not done already:
  
  sudo mkarchroot -u <chrootdir>/root
+
  pacman -S devtools
  
Then, to build a package in your chroot run
+
To make a clean chroot, create a directory in which the chroot will reside.  For example, {{ic|$HOME/chroot}}.
  
sudo makechrootpkg -c -r <chrootdir>
+
Now create the chroot:
  
A unionfs is used to maintain the clean chroot during building.  All installed dependencies or makedepends and other changes made during building are done in <chrootdir>/rw.  Passing the -c flag to makechrootpkg ensures that this directory is cleaned before building starts.
+
CHROOT=$HOME/chroot
 +
mkdir $CHROOT
 +
sudo mkarchroot $CHROOT/root base base-devel sudo
 +
 
 +
{{Note|One can also define the CHROOT variable in $HOME/.bashrc using the export command if the location is to be repeatedly used. }}
 +
 
 +
Edit {{ic|$CHROOT/root/etc/makepkg.conf}} to set the packager name and any makeflags.  Also adjust the mirror list in {{ic|$CHROOT/root/etc/pacman.d/mirrorlist}} and enable '''[testing]''' in {{ic|$CHROOT/root/etc/pacman.conf}} if desired.
 +
 
 +
Alternatively, provide a custom{{ic|pacman.conf}} and {{ic|makepkg.conf}} with the following:
 +
 +
sudo mkarchroot -C <pacman.conf> -M <makepkg.conf> $CHROOT/root base base-devel sudo
 +
 
 +
It is recommended however users do not use custom {{ic|pacman.conf}} and {{ic|makepkg.conf}} during the initial creation of clean chroot to ensure no user-specific adjustments are made.  ''Use with caution.''
 +
 
 +
== Building in the Chroot ==
 +
 
 +
Firstly, make sure the chroot is up to date with:
 +
 
 +
sudo mkarchroot -u $CHROOT/root
 +
 
 +
Then, to build a package in the chroot, run the following from the dir containing the PKGBUILD:
 +
 
 +
sudo makechrootpkg -c -r $CHROOT
 +
 
 +
A unionfs is used to maintain the clean chroot during building.  All installed dependencies or makedepends and other changes made during building are done in $CHROOT/rw.  Passing the -c flag to makechrootpkg ensures that this directory is cleaned before building starts.
  
 
= Handling Major Rebuilds =
 
= Handling Major Rebuilds =
  
The cleanest way to handle a major rebuild is to create a new chroot and build your first package (typically the package you are doing the rebuild for).  Then create a local repo in you chroot.  To do this:
+
The cleanest way to handle a major rebuild is to create a new chroot and build the first package (typically the package for which the rebuild is meant).  Then create a local repo inside the new chroot.  To do this:
  
  sudo mkdir <chrootdir>/root/repo
+
  sudo mkdir $CHROOT/root/repo
  sudo chmod 777 <chrootdir>/root/repo
+
  sudo chmod 0777 $CHROOT/root/repo
  
The chmod statement allows you to copy package files and create the local repo as your user rather than root.
+
The chmod statement allows for the coping of package files and for the creation of the local repo as your user rather than root.
  
  cp <package> <chrootdir>/root/repo
+
  cp <package> $CHROOT/root/repo
 +
cd $CHROOT/root/repo
 
  repo-add local.db.tar.gz <package>
 
  repo-add local.db.tar.gz <package>
  
Then add the local repo to <chrootdir>/root/etc/pacman.conf
+
Then add the local repo to {{ic|$CHROOT/root/etc/pacman.conf}}
  
 
  [local]
 
  [local]
 
  Server = file:///repo
 
  Server = file:///repo
  
and update your repo
+
As long as you add only self built packages to this repo, you can add
 +
 
 +
SigLevel = TrustAll
 +
 
 +
and update the repo:
 +
 
 +
sudo mkarchroot -u $CHROOT/root
 +
 
 +
With every additional package rebuilt, copy the package to the local repo directory, add it to the repo database and update the chroot.
 +
 
 +
= Alternate Rebuild Handling =
 +
 
 +
The above directions will work fine, but they can dirty the "pristine" chroot that makechrootpkg tries to keep in check (that is the point of using unionfs - dirtying a separate 'rw' directory).
 +
 
 +
== Using a custom repo ==
 +
Follow the steps above to setup a local repo inside the chroot.
 +
 
 +
Build packages using:
 +
sudo makechrootpkg -r $CHROOT -u
 +
The -u will update the chroot before building (-Syu) but updates will be installed to the rw layer, maintaining a clean chroot.
  
  sudo mkarchroot -u <chrootdir>/root
+
== Manual package installation ==
 +
Packages can be installed manually to the rw layer of the chroot by using:
 +
  sudo makechrootpkg -r $CHROOT -I package-1.0-1-i686.pkg.tar.gz
  
With every additional package rebuilt, copy the package to the local repo directory, add it to the repo database and update your chroot.
+
== Installation after building ==
 +
Tell makechrootpkg to simply install a package to the rw layer of the chroot after building by passing the -i arg. Unrecognized args get passed to makepkg, so this calls `makepkg` with the -i arg.
 +
sudo makechrootpkg -r $CHROOT -- -i

Revision as of 11:07, 1 February 2013


Introduction

This article is part of the DeveloperWiki.

Why

Building in a clean chroot prevents missing dependencies in packages, whether due to unwanted linking or packages missing in the depends array in the PKGBUILD. It also allows users to build a package for the stable repositories (core, extra, community) while having packages from [testing] installed.

Convenience Way

To quickly build a package in a chroot without any further tinkering, one can use the helper scripts from the devtools package.

These helper scripts should be called in the same directory where the PKGBUILD is, just like with makepkg. For instance, extra-i686-build automatically sets up chroot in /var/lib/archbuild, updates it, and builds a package for the extra repository. For multilib builds there is just multilib-build without an architecture.

Tip: Consult the table below for information on which script to use when building for a specific repository and architecture.
Note: [core] is omitted because those packages are required to go through [testing] first before landing in [core].
Target repository Architecture Build script to use
extra / community i686 extra-i686-build
extra / community x86_64 extra-x86_64-build
testing / community-testing i686 testing-i686-build
testing / community-testing x86_64 testing-x86_64-build
staging / community-staging i686 staging-i686-build
staging / community-staging x86_64 staging-x86_64-build
multilib x86_64 multilib-build
multilib-testing x86_64 multilib-testing-build
multilib-staging x86_64 multilib-staging-build

Classic Way

Setting Up A Chroot

The devtools package provides tools for creating and building within clean chroots. Install it if not done already:

pacman -S devtools

To make a clean chroot, create a directory in which the chroot will reside. For example, $HOME/chroot.

Now create the chroot:

CHROOT=$HOME/chroot
mkdir $CHROOT
sudo mkarchroot $CHROOT/root base base-devel sudo
Note: One can also define the CHROOT variable in $HOME/.bashrc using the export command if the location is to be repeatedly used.

Edit $CHROOT/root/etc/makepkg.conf to set the packager name and any makeflags. Also adjust the mirror list in $CHROOT/root/etc/pacman.d/mirrorlist and enable [testing] in $CHROOT/root/etc/pacman.conf if desired.

Alternatively, provide a custompacman.conf and makepkg.conf with the following:

sudo mkarchroot -C <pacman.conf> -M <makepkg.conf> $CHROOT/root base base-devel sudo

It is recommended however users do not use custom pacman.conf and makepkg.conf during the initial creation of clean chroot to ensure no user-specific adjustments are made. Use with caution.

Building in the Chroot

Firstly, make sure the chroot is up to date with:

sudo mkarchroot -u $CHROOT/root

Then, to build a package in the chroot, run the following from the dir containing the PKGBUILD:

sudo makechrootpkg -c -r $CHROOT

A unionfs is used to maintain the clean chroot during building. All installed dependencies or makedepends and other changes made during building are done in $CHROOT/rw. Passing the -c flag to makechrootpkg ensures that this directory is cleaned before building starts.

Handling Major Rebuilds

The cleanest way to handle a major rebuild is to create a new chroot and build the first package (typically the package for which the rebuild is meant). Then create a local repo inside the new chroot. To do this:

sudo mkdir $CHROOT/root/repo
sudo chmod 0777 $CHROOT/root/repo

The chmod statement allows for the coping of package files and for the creation of the local repo as your user rather than root.

cp <package> $CHROOT/root/repo
cd $CHROOT/root/repo
repo-add local.db.tar.gz <package>

Then add the local repo to $CHROOT/root/etc/pacman.conf

[local]
Server = file:///repo

As long as you add only self built packages to this repo, you can add

SigLevel = TrustAll

and update the repo:

sudo mkarchroot -u $CHROOT/root

With every additional package rebuilt, copy the package to the local repo directory, add it to the repo database and update the chroot.

Alternate Rebuild Handling

The above directions will work fine, but they can dirty the "pristine" chroot that makechrootpkg tries to keep in check (that is the point of using unionfs - dirtying a separate 'rw' directory).

Using a custom repo

Follow the steps above to setup a local repo inside the chroot.

Build packages using:

sudo makechrootpkg -r $CHROOT -u

The -u will update the chroot before building (-Syu) but updates will be installed to the rw layer, maintaining a clean chroot.

Manual package installation

Packages can be installed manually to the rw layer of the chroot by using:

sudo makechrootpkg -r $CHROOT -I package-1.0-1-i686.pkg.tar.gz

Installation after building

Tell makechrootpkg to simply install a package to the rw layer of the chroot after building by passing the -i arg. Unrecognized args get passed to makepkg, so this calls `makepkg` with the -i arg.

sudo makechrootpkg -r $CHROOT -- -i