Difference between revisions of "Dialup without a dialer"

From ArchWiki
Jump to: navigation, search
m (Dialup Sans Dialer moved to Dialup without a dialer HOWTO)
(Redirect to merged page.)
(11 intermediate revisions by 9 users not shown)
Line 1: Line 1:
[[Category:Networking (English)]]
#REDIRECT [[Direct Modem Connection#Dialup without a dialer]]
====Dialup Without A Dialer====
This page tells you how you can execute pppd directly without using dialer software such as pon/poff, wvdial, kppp, etc. It stays connected through X server shutdowns and is extremely simple, in accordance with Arch philosophy.
Install '''ppp'''
  pacman -S ppp
Back up '''/etc/ppp/options'''
  mv /etc/ppp/options /etc/ppp/options.old
Create new '''/etc/ppp/options''' using this template:
  user <USERNAME>
  connect 'chat -t60 \\"\\" ATZ OK ATX3 OK ATDT<NUMBER> CONNECT'
Now, take a good look at the next table:
  WINDOW$        GNU/Linux
  COM1  -->  /dev/ttyS0
  COM2  -->  /dev/ttyS1
  COM3  -->  /dev/ttyS2
Edit to point device to your modem device, to use your dialup account username, and to dial your ISP's number after the ATDT. You can disable call waiting using ATDT  70,15555555(in North America, anyway).  You may also wish to edit the dialer commands, search http://www.google.com for information on how to do this. If your ISP uses CHAP then next file is '''chap-secrets'''
Edit '''/etc/ppp/chap-secrets'''.  See [http://www.tldp.org/HOWTO/PPP-HOWTO/x1005.html The PAP/CHAP secrets file] for more detials.
Now you are ready to connect.  Connect (as root) using '''pppd /dev/modem''' (or whatever device your modem is connected as).
To disconnect, use '''killall pppd'''
If you wish to connect as user, you can use sudo.  Configure sudo to call the above commands for your user, and you can use the following aliases in your '''~/.bash_profile''':
  alias dial='sudo /usr/sbin/pppd /dev/modem'
  alias hang='sudo /usr/bin/killall pppd'
  Now you can connect with '''dial''' and disconnect with '''hang'''

Revision as of 07:30, 16 August 2012