Dialup without a dialer

From ArchWiki
Revision as of 17:43, 23 July 2005 by Mr Green (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Dialup Sans Dialer

This page tells you how you can execute pppd directly without using dialer software such as pon/poff, wvdial, kppp, etc. It stays connected through X server shutdowns and is extremely simple, in accordance with Arch philosophy.


  1. Install pppd
 pacman -S pppd
  1. Back up /etc/ppp/options
 mv /etc/ppp/options /etc/ppp/options.old
  1. Create new /etc/ppp/options using this template:
 user <USERNAME>
 connect 'chat -t60 \\"\\" ATZ OK ATX3 OK ATDT<NUMBER> CONNECT'
 Now, take a good look at the next table:
 WINDOW$        GNU/Linux
  COM1   -->   /dev/ttyS0
  COM2   -->   /dev/ttyS1
  COM3   -->   /dev/ttyS2
 Edit to point device to your modem device, to use your dialup account username, and to dial your ISP's number after the ATDT. You can disable call waiting using ATDT70,15555555 (in North America, anyway).  You may also wish to edit the dialer commands, search http://www.google.com for information on how to do this. If your ISP uses CHAP then next file is chap-secrets*
  1. Edit /etc/ppp/pap-secrets
  1. Now you are ready to connect. Connect (as root) using pppd /dev/modem (or whatever device your modem is connected as).
  1. To disconnect, use killall pppd
  1. If you wish to connect as user, you can use sudo. Configure sudo to call the above commands for your user, and you can use the following aliases in your ~/.bash_profile:
 alias dial='sudo /usr/sbin/pppd /dev/modem'
 alias hang='sudo /usr/bin/killall pppd'
 Now you can connect with dial and disconnect with hang