Dialup without a dialer
Dialup Sans Dialer
This page tells you how you can execute pppd directly without using dialer software such as pon/poff, wvdial, kppp, etc. It stays connected through X server shutdowns and is extremely simple, in accordance with Arch philosophy.
pacman -S pppd
Back up /etc/ppp/options
mv /etc/ppp/options /etc/ppp/options.old
Create new /etc/ppp/options using this template:
lock modem debug </dev/DEVICE> 115200 defaultroute noipdefault user <USERNAME> connect 'chat -t60 \\"\\" ATZ OK ATX3 OK ATDT<NUMBER> CONNECT'
Now, take a good look at the next table:
WINDOW$ GNU/Linux COM1 --> /dev/ttyS0 COM2 --> /dev/ttyS1 COM3 --> /dev/ttyS2 ...
Edit to point device to your modem device, to use your dialup account username, and to dial your ISP's number after the ATDT. You can disable call waiting using ATDT70,15555555 (in North America, anyway). You may also wish to edit the dialer commands, search http://www.google.com for information on how to do this. If your ISP uses CHAP then next file is chap-secrets*
<verbatim> \"USERNAM\" * \"PASSWORD\" </verbatim>
- Now you are ready to connect. Connect (as root) using
pppd /dev/modem(or whatever device your modem is connected as).
- To disconnect, use
- If you wish to connect as user, you can use sudo. Configure sudo to call the above commands for your user, and you can use the following aliases in your
<verbatim> alias dial='sudo /usr/sbin/pppd /dev/modem' alias hang='sudo /usr/bin/killall pppd' </verbatim> Now you can connect with
dialand disconnect with