Difference between revisions of "Digitenne (Nederlands)"

From ArchWiki
Jump to: navigation, search
(Installeer oscam van aur)
(installation and configuration sasc-ng and oscam added)
Line 129: Line 129:
 
  [18014.890893] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
 
  [18014.890893] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
  
=== Installeer oscam van aur ===
+
=== Installeer oscam via aur ===
 
http://aur.archlinux.org/packages.php?ID=45646
 
http://aur.archlinux.org/packages.php?ID=45646
 
  $ wget http://aur.archlinux.org/packages/oscam/oscam.tar.gz
 
  $ wget http://aur.archlinux.org/packages/oscam/oscam.tar.gz
Line 140: Line 140:
 
Oscam gebruikt de volgende configuratiebestanden:  
 
Oscam gebruikt de volgende configuratiebestanden:  
 
==== /etc/oscam/oscam.conf ====
 
==== /etc/oscam/oscam.conf ====
 +
# main configuration
 +
[global]
 +
nice       = -1
 +
WaitForCards  = 1
 +
 +
# logging
 +
pidfile       = /var/run/oscam.pid
 +
logfile       = /var/log/oscam/oscam.log
 +
usrfile       = /var/log/oscam/oscamuser.log
 +
cwlogdir      = /var/log/oscam/cw
 +
 +
# monitor
 +
[monitor]
 +
port       = 8988
 +
aulow       = 120
 +
monlevel      = 1
 +
 +
# web interface
 +
[webif]
 +
httpport      = 8888
 +
httpuser      = myusername
 +
httppwd        = mypassword
 +
httpallowed    = 192.168.31.201
 +
 +
# protocols
 +
 +
[newcamd]
 +
key            = 000102030405060708090A0B0C0D
 +
port          = 15050@0B00:0E030
 
==== /etc/oscam/oscam.server ====
 
==== /etc/oscam/oscam.server ====
 +
# reader configuration
 +
 +
[reader]
 +
label    = reader1
 +
protocol = mouse
 +
detect  = CD
 +
device  = /dev/ttyUSB0
 +
group    = 1
 +
emmcache = 1,3,2
 +
services = services1
 +
caid    = 0B00
 +
mhz      = 500
 +
cardmhz  = 500
 
==== /etc/oscam/oscam.services ====
 
==== /etc/oscam/oscam.services ====
 +
# definition of services
 +
#
 +
# format:
 +
# [name]
 +
# caid=CAID[,CAID]...
 +
# provid = provider ID[,provider ID]...
 +
# srvid = service ID[,service ID]...
 +
 +
[services1]
 +
caid=0B00
 +
provid=0E030
 +
srvid=
 
==== /etc/oscam/oscam.user ====
 
==== /etc/oscam/oscam.user ====
 +
# user configuration
 +
 +
[account]
 +
user      = user1
 +
pwd        = password1
 +
monlevel  = 0
 +
uniq      = 0
 +
group      = 1
 +
au        = 1
 +
ident   = 0B00:0E030
 +
caid      = 0B00
 +
 +
# user for group 2 with monitor access, AU enabled
 +
 +
#[account]
 +
user      = user2
 +
pwd        = password2
 +
monlevel  = 0
 +
uniq      = 0
 +
group      = 1
 +
au        = 1
 +
ident   = 0B00:0E030
 +
caid      = 0B00
 +
Maak de directory aan waar oscam zijn logbestanden kwijt kan
 +
# mkdir /var/log/oscam
 +
=== Oscam starten ===
 +
# /etc/rc.d/oscam start
 +
Dit levert de volgende meldingen op in /var/log/oscam.log
 +
-------------------------------------------------------------------------------
 +
>> OSCam <<  cardserver started at Thu May 19 19:08:47 2011
 +
-------------------------------------------------------------------------------
 +
2011/05/19 19:08:47  1556 s  version=0.99.4svn, build #3146, system=i686-pc-linux, nice=-1
 +
2011/05/19 19:08:47  1556 s  max. clients=509, client max. idle=120 sec
 +
2011/05/19 19:08:47  1556 s  max. logsize=unlimited
 +
2011/05/19 19:08:47  1556 s  client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
 +
2011/05/19 19:08:47  1556 s  shared memory initialized (size=4340618, id=229378)
 +
2011/05/19 19:08:47  1556 s  auth size=4772
 +
2011/05/19 19:08:47  1556 s  services reloaded: 0 services freed, 1 services loaded
 +
2011/05/19 19:08:47  1556 s  userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
 +
2011/05/19 19:08:47  1556 s  signal handling initialized (type=sysv)
 +
2011/05/19 19:08:47  1556 s  can't open file "/etc/oscam/oscam.srvid" (err=2), no service-id's loaded
 +
2011/05/19 19:08:47  1556 s  can't open file "/etc/oscam/oscam.tiers" (err=2), no tier-id's loaded
 +
2011/05/19 19:08:47  1556 s  can't open file "/etc/oscam/oscam.provid" (err=2), no provids's loaded
 +
2011/05/19 19:08:47  1557 s  monitor: initialized (fd=7, port=8988)
 +
2011/05/19 19:08:47  1557 s  camd 3.3x: disabled
 +
2011/05/19 19:08:47  1557 s  camd 3.5x: disabled
 +
2011/05/19 19:08:47  1557 s  cs378x: disabled
 +
2011/05/19 19:08:47  1557 s  newcamd: initialized (fd=8, port=15050, crypted)
 +
2011/05/19 19:08:47  1557 s  CAID: 0B00
 +
2011/05/19 19:08:47  1557 s  provid #0: 00E030
 +
2011/05/19 19:08:47  1557 s  cccam: disabled
 +
2011/05/19 19:08:47  1557 s  radegast: disabled
 +
2011/05/19 19:08:47  1557 s  logger started (pid=1558)
 +
2011/05/19 19:08:47  1557 s  http started (pid=1559)
 +
2011/05/19 19:08:47  1559 h  HTTP Server listening on port 8888
 +
2011/05/19 19:08:47  1557 s  reader started (pid=1560, device=/dev/ttyUSB0, detect=cd, mhz=500, cardmhz=500)
 +
2011/05/19 19:08:47  1557 s  waiting for local card init
 +
2011/05/19 19:08:51  1557 s  init for all local cards done
 +
2011/05/19 19:08:51  1557 s  anti cascading disabled
 +
2011/05/19 19:08:51  1557 s  dvbapi: dvbapi disabled
 +
Steek nu de digitenne kaart in de cardreader. Dit levert de volgende meldingen op in /var/log/oscam/oscam.log:
 +
2011/05/19 19:13:25  1560 r02 card detected
 +
2011/05/19 19:13:29  1560 r02 ATR: 3B 24 00 30 42 30 30
 +
2011/05/19 19:13:30  1560 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
 +
2011/05/19 19:13:32  1560 r02 type: Conax, caid: 0B00, serial: 1428098758, hex serial: 551f0ec6, card: v64
 +
2011/05/19 19:13:32  1560 r02 Providers: 1
 +
2011/05/19 19:13:32  1560 r02 Provider: 1  Provider-Id: 000000
 +
2011/05/19 19:13:32  1560 r02 Provider: 1  SharedAddress: 002A8F87
 +
2011/05/19 19:13:32  1560 r02 Package: 1, id: 1010, date: 2011/03/01 - 2011/03/31, name: Digitenne
 +
2011/05/19 19:13:32  1560 r02 [conax-reader] ready for requests
 +
== Softcam (sasc-ng) ==
 +
=== sasc-ng installeren via aur===
 +
http://aur.archlinux.org/packages.php?ID=27885
 +
# pacman -S mercurial
 +
$ wget http://aur.archlinux.org/packages/open-sasc-ng/open-sasc-ng.tar.gz
 +
$ tar -xf open-sasc-ng.tar.gz
 +
$ cd open-sasc-ng
 +
$ makepkg
 +
# pacman -U open-sasc-ng-560-4-i686.pkg.tar.xz
 +
=== Sasc-ng configureren ===
 +
==== /etc/conf.d/sasc-ng ====
 +
# Use -j <real>:<virtual> to link adapters
 +
 +
SASCNG_ARGS="-j 0:1"
 +
DVBLOOPBACK_ARGS="num_adapters=1"
 +
LOGDIR="/var/log/"
 +
CAMDIR=/etc/camdir
 +
 +
==== /etc/camdir/cardclient.conf ====
 +
# Comment lines can start with # or ;
 +
#
 +
# every client line starts with the client name, followed by some arguments:
 +
# 'hostname' is the name of the server
 +
# 'port'    is the port on the server
 +
# 'emm'      is a flag to allow EMM transfers to the server
 +
#            (0=disabled 1=enabled)
 +
# 'caid'    (optional) caid on which this client should work
 +
# 'mask'    (optional) mask for caid e.g. caid=1700 mask=FF00 would allow
 +
#            anything between 1700 & 17FF.
 +
#            Default is 1700 & FF00. If only caid is given mask is FFFF.
 +
#            You may give multiple caid/mask values comma separated
 +
#            (e.g. 1702,1722,0d0c/ff00).
 +
# 'username' is the login username
 +
# 'password' is the login password
 +
#
 +
# newcamd client
 +
# 'cfgkey' is the config key (28bytes)
 +
newcamd:localhost:15050:1/0B00/FF00:user2:password2:000102030405060708090A0B0C0D

Revision as of 17:54, 19 May 2011

This template has only maintenance purposes. For linking to local translations please use interlanguage links, see Help:i18n#Interlanguage links.


Local languages: Català – Dansk – English – Español – Esperanto – Hrvatski – Indonesia – Italiano – Lietuviškai – Magyar – Nederlands – Norsk Bokmål – Polski – Português – Slovenský – Česky – Ελληνικά – Български – Русский – Српски – Українська – עברית – العربية – ไทย – 日本語 – 正體中文 – 简体中文 – 한국어


External languages (all articles in these languages should be moved to the external wiki): Deutsch – Français – Română – Suomi – Svenska – Tiếng Việt – Türkçe – فارسی

Deze pagina behandelt het decoderen van digitenne (DVB-T) in Nederland.

Gebruikte hardware

Ik gebruik de volgende hardware:

DVB-T ontvanger testen

Controle device nodes

Kijk eerst of er een DVB ontvanger aanwezig is. Onder /dev hoort de map dvb aanwezig te zijn:

$ ls -l /dev/dvb/adapter0/*
crw-rw---- 1 root video 212, 4 May 15 10:21 /dev/dvb/adapter0/demux0
crw-rw---- 1 root video 212, 5 May 15 10:21 /dev/dvb/adapter0/dvr0
crw-rw---- 1 root video 212, 3 May 15 10:21 /dev/dvb/adapter0/frontend0
crw-rw---- 1 root video 212, 7 May 15 10:21 /dev/dvb/adapter0/net0

DVB-T ontvanger testen met vlc

Gebruik nu vlc om de ontvanger te testen:

# pacman -S vlc
$vlc
Media -> Open Capture device,
Capture mode : DVB
Adapter card to tune: /dev/dvb/adapter0
DVB type: DVB-T
Transponder / multiplex frequency: 722000
Bandwidth: auto => play

Nu zal vlc alle kanalen scannnen, en na ongeveer 10 minuten het eerste beeld en/of geluid geven.

Als de permisies van /dev/dvb/adapter0 verkeerd staan zal vlc de volgende melding geven:

dvb access error: FrontEndOpen: opening device failed (Permission denied)
main input error: open of `dvb://frequency=0000' failed: (null)

Voeg dan jezelf toe aan de groep "video":

# usermod -a -G video yourusername

DVB-T ontvanger testen met tzap en mplayer

Installeer mplayer en tzap (onderdeel van linuxtv-dvb-apps)

# pacman -S linuxtv-dvb-apps mplayer

Scan nu naar de digitenne kanalen in nederland:

$ mkdir ~/.tzap
$ scan /usr/share/dvb/dvb-t/nl-All -o zap | tee ~/.tzap/channels.conf
scanning /usr/share/dvb/dvb-t/nl-All
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 474000000 0 1 9 3 1 3 0
initial transponder 474000000 0 2 9 3 1 3 0
>>> tune to: 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
0x0000 0x044d: pmt_pid 0x1b62 Digitenne -- Nederland 1 (running)
0x0000 0x044e: pmt_pid 0x1b6c Digitenne -- Nederland 2 (running)
0x0000 0x044f: pmt_pid 0x1b76 Digitenne -- Nederland 3 (running)
0x0000 0x0450: pmt_pid 0x1b80 Digitenne -- TV Rijnmond (running)
0x0000 0x0457: pmt_pid 0x1bc6 Digitenne -- Radio Rijnmond (running)
0x0000 0x0458: pmt_pid 0x1bd0 Digitenne -- Radio 1 (running)
0x0000 0x0459: pmt_pid 0x1bda Digitenne -- Radio 2 (running)
0x0000 0x045a: pmt_pid 0x1be4 Digitenne -- 3FM (running)
0x0000 0x045b: pmt_pid 0x1bee Digitenne -- Radio 4 (running)
0x0000 0x045c: pmt_pid 0x1bf8 Digitenne -- Radio 5 (running)
0x0000 0x045d: pmt_pid 0x1c02 Digitenne -- Radio 6 (running)
0x0000 0x045f: pmt_pid 0x1c16 Digitenne -- FunX (running)
Network Name 'Digitenne'
>>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
...

Dit levert het bestand ~/.tzap/channels.conf op. Hierin is te zien dat Nederland 1,2 en 3 op 474 MHz zitten, en dat Discovery channel op 498MHz zit. De frekwenties zijn afhankelijk van uw locatie.

Nederland 1:474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:7011:7012:1101
Nederland 2:474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:7021:7022:1102
Nederland 3:474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:7031:7032:1103
...
Nickelodeon:498000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3051:3052:35
Discovery Channel:498000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3061:3062:36
Eurosport 1:498000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3071:3072:37

Nu kan de tuner afgestemd worden op bijvoorbeeld Nederland 1

$ tzap -a 0 -r 'Nederland 1'
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/home/cedric/.tzap/channels.conf'
tuning to 474000000 Hz
video pid 0x1b63, audio pid 0x1b64
status 1b | signal 0dbd | snr 0062 | ber 001fffff | unc 00000000 | FE_HAS_LOCK
status 1b | signal 0d83 | snr 0063 | ber 00000000 | unc 00001e81 | FE_HAS_LOCK
status 1b | signal 0d17 | snr 0069 | ber 00000000 | unc 00001ef6 | FE_HAS_LOCK

Gebruik een andere terminal om mplayer te starten. Nu moet na enkele seconden Nederland 1 op het scherm verschijnen.

$ mplayer /dev/dvb/adapter0/dvr0 
MPlayer SVN-r33159-4.5.2 (C) 2000-2011 MPlayer Team
162 audio & 359 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing /dev/dvb/adapter0/dvr0.
TS file format detected.
VIDEO MPEG2(pid=7021) AUDIO MPA(pid=7022) NO SUBS (yet)!  PROGRAM N. 0
VIDEO:  MPEG2  704x576  (aspect 3)  25.000 fps  15000.0 kbps (1875.0 kbyte/s)
Load subtitles in /dev/dvb/adapter0/
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 160.0 kbit/10.42% (ratio: 20000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Unsupported PixelFormat 61
Unsupported PixelFormat 53
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [vdpau] 704x576 => 1024x576 Planar YV12 
A:22383.9 V:22383.9 A-V:  0.052 ct: -0.257 569/569  4%  3% 24.6% 3 0

Cardreader

Insteken cardreader

Nadat de Smargo smartreader + in de PC wordt gestoken zal dmesg laten zien dat er een nieuwe seriële poort (ttyUSB0) is toegevoegd:

$ dmesg
[18014.724903] usb 2-1: new full speed USB device using uhci_hcd and address 4
[18014.887673] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
[18014.887788] usb 2-1: Detected FT232BM
[18014.887794] usb 2-1: Number of endpoints 2
[18014.887799] usb 2-1: Endpoint 1 MaxPacketSize 64
[18014.887804] usb 2-1: Endpoint 2 MaxPacketSize 64
[18014.887808] usb 2-1: Setting MaxPacketSize 64
[18014.889396] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[18014.890893] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0

Installeer oscam via aur

http://aur.archlinux.org/packages.php?ID=45646

$ wget http://aur.archlinux.org/packages/oscam/oscam.tar.gz
$ tar -xf oscam.tar.gz 
$ cd oscam
$ makepkg
# pacman -U oscam-1.00-1-i686.pkg.tar.xz

Oscam configuratie

Oscam gebruikt de volgende configuratiebestanden:

/etc/oscam/oscam.conf

# main configuration
[global]
nice	      = -1
WaitForCards  = 1

# logging
pidfile	      = /var/run/oscam.pid
logfile	      = /var/log/oscam/oscam.log
usrfile	      = /var/log/oscam/oscamuser.log
cwlogdir      = /var/log/oscam/cw

# monitor
[monitor]
port	      = 8988
aulow	      = 120
monlevel      = 1

# web interface
[webif]
httpport       = 8888
httpuser       = myusername
httppwd        = mypassword
httpallowed    = 192.168.31.201

# protocols

[newcamd]
key            = 000102030405060708090A0B0C0D
port           = 15050@0B00:0E030

/etc/oscam/oscam.server

# reader configuration

[reader]
label    = reader1
protocol = mouse
detect   = CD
device   = /dev/ttyUSB0
group    = 1
emmcache = 1,3,2
services = services1
caid     = 0B00
mhz      = 500
cardmhz  = 500

/etc/oscam/oscam.services

# definition of services 
#
# format:
# [name]
# caid=CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...

[services1]
caid=0B00
provid=0E030
srvid=

/etc/oscam/oscam.user

# user configuration

[account]
user       = user1
pwd        = password1
monlevel   = 0
uniq       = 0
group      = 1
au         = 1
ident 	   = 0B00:0E030
caid       = 0B00

# user for group 2 with monitor access, AU enabled

#[account]
user       = user2
pwd        = password2
monlevel   = 0
uniq       = 0
group      = 1
au         = 1
ident 	   = 0B00:0E030
caid       = 0B00

Maak de directory aan waar oscam zijn logbestanden kwijt kan

# mkdir /var/log/oscam

Oscam starten

# /etc/rc.d/oscam start

Dit levert de volgende meldingen op in /var/log/oscam.log

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Thu May 19 19:08:47 2011
-------------------------------------------------------------------------------
2011/05/19 19:08:47   1556 s   version=0.99.4svn, build #3146, system=i686-pc-linux, nice=-1
2011/05/19 19:08:47   1556 s   max. clients=509, client max. idle=120 sec
2011/05/19 19:08:47   1556 s   max. logsize=unlimited
2011/05/19 19:08:47   1556 s   client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/05/19 19:08:47   1556 s   shared memory initialized (size=4340618, id=229378)
2011/05/19 19:08:47   1556 s   auth size=4772
2011/05/19 19:08:47   1556 s   services reloaded: 0 services freed, 1 services loaded
2011/05/19 19:08:47   1556 s   userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/05/19 19:08:47   1556 s   signal handling initialized (type=sysv)
2011/05/19 19:08:47   1556 s   can't open file "/etc/oscam/oscam.srvid" (err=2), no service-id's loaded
2011/05/19 19:08:47   1556 s   can't open file "/etc/oscam/oscam.tiers" (err=2), no tier-id's loaded
2011/05/19 19:08:47   1556 s   can't open file "/etc/oscam/oscam.provid" (err=2), no provids's loaded
2011/05/19 19:08:47   1557 s   monitor: initialized (fd=7, port=8988)
2011/05/19 19:08:47   1557 s   camd 3.3x: disabled
2011/05/19 19:08:47   1557 s   camd 3.5x: disabled
2011/05/19 19:08:47   1557 s   cs378x: disabled
2011/05/19 19:08:47   1557 s   newcamd: initialized (fd=8, port=15050, crypted)
2011/05/19 19:08:47   1557 s   CAID: 0B00
2011/05/19 19:08:47   1557 s   provid #0: 00E030
2011/05/19 19:08:47   1557 s   cccam: disabled
2011/05/19 19:08:47   1557 s   radegast: disabled
2011/05/19 19:08:47   1557 s   logger started (pid=1558)
2011/05/19 19:08:47   1557 s   http started (pid=1559)
2011/05/19 19:08:47   1559 h   HTTP Server listening on port 8888
2011/05/19 19:08:47   1557 s   reader started (pid=1560, device=/dev/ttyUSB0, detect=cd, mhz=500, cardmhz=500)
2011/05/19 19:08:47   1557 s   waiting for local card init
2011/05/19 19:08:51   1557 s   init for all local cards done
2011/05/19 19:08:51   1557 s   anti cascading disabled
2011/05/19 19:08:51   1557 s   dvbapi: dvbapi disabled

Steek nu de digitenne kaart in de cardreader. Dit levert de volgende meldingen op in /var/log/oscam/oscam.log:

2011/05/19 19:13:25   1560 r02 card detected
2011/05/19 19:13:29   1560 r02 ATR: 3B 24 00 30 42 30 30 
2011/05/19 19:13:30   1560 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/05/19 19:13:32   1560 r02 type: Conax, caid: 0B00, serial: 1428098758, hex serial: 551f0ec6, card: v64
2011/05/19 19:13:32   1560 r02 Providers: 1
2011/05/19 19:13:32   1560 r02 Provider: 1  Provider-Id: 000000
2011/05/19 19:13:32   1560 r02 Provider: 1  SharedAddress: 002A8F87
2011/05/19 19:13:32   1560 r02 Package: 1, id: 1010, date: 2011/03/01 - 2011/03/31, name: Digitenne
2011/05/19 19:13:32   1560 r02 [conax-reader] ready for requests

Softcam (sasc-ng)

sasc-ng installeren via aur

http://aur.archlinux.org/packages.php?ID=27885

# pacman -S mercurial
$ wget http://aur.archlinux.org/packages/open-sasc-ng/open-sasc-ng.tar.gz
$ tar -xf open-sasc-ng.tar.gz
$ cd open-sasc-ng
$ makepkg
# pacman -U open-sasc-ng-560-4-i686.pkg.tar.xz

Sasc-ng configureren

/etc/conf.d/sasc-ng

# Use -j <real>:<virtual> to link adapters
SASCNG_ARGS="-j 0:1"
DVBLOOPBACK_ARGS="num_adapters=1"
LOGDIR="/var/log/"
CAMDIR=/etc/camdir

/etc/camdir/cardclient.conf

# Comment lines can start with # or ;
#
# every client line starts with the client name, followed by some arguments:
# 'hostname' is the name of the server
# 'port'     is the port on the server
# 'emm'      is a flag to allow EMM transfers to the server
#            (0=disabled 1=enabled)
# 'caid'     (optional) caid on which this client should work
# 'mask'     (optional) mask for caid e.g. caid=1700 mask=FF00 would allow
#            anything between 1700 & 17FF.
#            Default is 1700 & FF00. If only caid is given mask is FFFF.
#            You may give multiple caid/mask values comma separated
#            (e.g. 1702,1722,0d0c/ff00).
# 'username' is the login username
# 'password' is the login password
#
# newcamd client
# 'cfgkey' is the config key (28bytes)
newcamd:localhost:15050:1/0B00/FF00:user2:password2:000102030405060708090A0B0C0D