Disable clearing of boot messages

From ArchWiki
Revision as of 05:31, 22 April 2016 by Michalzuber (talk | contribs) (Added kernel parameters tip)
Jump to navigation Jump to search

After the boot process, the screen is cleared and the login prompt appears, leaving users unable to read init output and error messages. This default behavior may be modified using methods outlined in this article.

Note that regardless of the chosen option, kernel messages can be displayed for inspection after booting by using dmesg or all logs from the current boot with journalctl -b.

Using flow control

This is basic management that applies to most terminal emulators, including virtual consoles (vc):

  • Press Ctrl+S to pause the output
  • And Ctrl+Q to resume it
Note: This pauses not only the output, but also programs which try to print to the terminal, since they'll block on the write() calls for as long as the output is paused. If your init appears frozen, make sure the system console is not paused.

Have boot messages stay on tty1

By default, arch has the getty@tty1 service enabled. The service file already passes --noclear, which stops agetty from clearing the screen. However systemd clears the screen before starting it. To disable this behavior, create a drop-in directory /etc/systemd/system/getty@tty1.service.d/ and create a noclear.conf file in it:


This overrides only TTYVTDisallocate for agetty on TTY1 and let the global service file /usr/lib/systemd/system/getty@.service untouched. This is the recommended way to edit systemd unit files.

Late KMS starting may still cause the first few boot messages to clear. If this is the case, try enabling early KMS start.

There will probably be too many boot messages to view on one screen. Use Shift+PgUp/PgDown to scroll. If there are too many boot messages you still might not be able to see all of them by scrolling. Try increasing the size of your scrollback buffer.

Disable clearing in /etc/issue

If you have an old /etc/issue that has the "clear TTY" escape sequences, remove them.

# sed -i $'s/\e\[H//; s/\e\[2J//' /etc/issue

Modifying kernel parameters

Removing quiet parameter from the Kernel parameters of the bootloader will prevent clearing the messages.