Difference between revisions of "Disk cloning"
(→Disk cloning software: update link and description)
|Line 103:||Line 103:|
== Disk cloning software ==
== Disk cloning software ==
See also [[Backup programs
See also [[Backup programs]] .
=== Disk cloning in Arch ===
=== Disk cloning in Arch ===
Revision as of 06:37, 21 February 2016
zh-CN:Disk cloning Disk cloning is the process of making an image of a partition or of an entire hard drive. This can be useful for copying the drive to other computers and for backup and recovery purposes.
The dd command is a simple, yet versatile and powerful tool. It can be used to copy from source to destination, block-by-block, regardless of their filesystem types or operating systems. A convenient method is to use dd from a live environment, as in a Live CD.
if=) and output file (
of=) and do not reverse them! Always ensure that the destination drive or partition (
of=) is of equal or greater size than the source (
Cloning a partition
From physical disk
/dev/sda, partition 1, to physical disk
/dev/sdb, partition 1.
# dd if=/dev/sda1 of=/dev/sdb1 bs=512 conv=noerror,sync
sdb1in the example) does not exist, dd will create a file with this name and will start filling up your root file system!
Cloning an entire hard disk
From physical disk
/dev/sdX to physical disk
# dd if=/dev/sdX of=/dev/sdY bs=512 conv=noerror,sync
This will clone the entire drive, including the MBR (and therefore bootloader), all partitions, UUIDs, and data.
noerrorinstructs dd to continue operation, ignoring all read errors. Default behavior for dd is to halt at any error.
syncfills input blocks with zeroes if there were any read errors, so data offsets stay in sync.
bs=512sets the block size to 512 bytes, the "classic" block size for hard drives. If and only if your hard drives have a 4 Kib block size, you may use "4096" instead of "512". Also, please read the warning below, because there is more to this than just "block sizes" -it also influences how read errors propagate.
The dd utility technically has an "input block size" (IBS) and an "output block size" (OBS). When you set
bs, you effectively set both IBS and OBS. Normally, if your block size is, say, 1 Mib, dd will read 1024*1024 bytes and write as many bytes. But if a read error occurs, things will go wrong. Many people seem to think that dd will "fill up read errors with zeroes" if you use the
noerror,sync options, but this is not what happens. dd will, according to documentation, fill up the OBS to IBS size after completing its read, which means adding zeroes at the end of the block. This means, for a disk, that effectively the whole 1 Mib would become messed up because of a single 512 byte read error in the beginning of the read: 12ERROR89 would become 128900000 instead of 120000089.
If you are positive that your disk does not contain any errors, you could proceed using a larger block size, which will increase the speed of your copying several fold. For example, changing bs from 512 to 64 Ki changed copying speed from 35 MB/s to 120 MB/s on a simple Celeron 2.7 GHz system. But keep in mind that read errors on the source disk will end up as block errors on the destination disk, i.e. a single 512-byte read error will mess up the whole 64 Kib output block.
status=progressoption. See dd for details.
- To regain unique UUIDs of an ext2/3/4 filesystem, use
tune2fs /dev/sdXY -U randomon every partition.
- Partition table changes from dd are not registered by the kernel. To notify of changes without rebooting, use a utility like partprobe (part of GNU Parted).
Backing up the MBR
The MBR is stored in the the first 512 bytes of the disk. It consist of 3 parts:
- The first 446 bytes contain the boot loader.
- The next 64 bytes contain the partition table (4 entries of 16 bytes each, one entry for each primary partition).
- The last 2 bytes contain an identifier
To save the MBR as
# dd if=/dev/sdX of=/path/to/mbr_file.img bs=512 count=1
To restore (be careful: this could destroy your existing partition table and with it access to all data on the disk):
# dd if=/path/to/mbr_file.img of=/dev/sdX
If you only want to restore the boot loader, but not the primary partition table entries, just restore the first 446 bytes of the MBR:
# dd if=/path/to/mbr_file.img of=/dev/sdX bs=446 count=1
To restore only the partition table, one must use:
# dd if=/path/to/mbr_file.img of=/dev/sdX bs=1 skip=446 count=64
You can also get the MBR from a full dd disk image:
# dd if=/path/to/disk.img of=/path/to/mbr_file.img bs=512 count=1
Create disk image
1. Boot from a live media.
2. Make sure no partitions are mounted from the source hard drive.
3. Mount the external HD
4. Backup the drive.
# dd if=/dev/sdX conv=sync,noerror bs=64K | gzip -c > /path/to/backup.img.gz
If necessary (e.g. when the format of the external HD is FAT32) split the disk image in volumes (see also the split man pages).
# dd if=/dev/sdX conv=sync,noerror bs=64K | gzip -c | split -a3 -b2G - /path/to/backup.img.gz
If there is not enough disk space locally, you may send the image through ssh:
# dd if=/dev/sdX conv=sync,noerror bs=64K | gzip -c | ssh user@local dd of=backup.img.gz
5. Save extra information about the drive geometry necessary in order to interpret the partition table stored within the image. The most important of which is the cylinder size.
# fdisk -l /dev/sdX > /path/to/list_fdisk.info
bs=) that is equal to the amount of cache on the HD you are backing up. For example,
bs=8192Kworks for an 8 MiB cache. The 64 Kib mentioned in this article is better than the default
bs=512bytes, but it will run faster with a larger
To restore your system:
# gunzip -c /path/to/backup.img.gz | dd of=/dev/sdX
When the image has been split, use the following instead:
# cat /path/to/backup.img.gz* | gunzip -c | dd of=/dev/sdX
Disk cloning software
See also Backup programs for other applications that can take full system snapshots, among other functionality.
Disk cloning in Arch
- Partclone provides utilities to save and restore used blocks on a partition and supports ext2, ext3, ext4, hfs+, reiserfs, reiser4, btrfs, vmfs3, vmfs5, xfs, jfs, ufs, ntfs, fat(12/16/32), exfat. Optionally, an ncurses interface can be used. Partclone is available in the community repository.
- Partimage, an ncurses program, is available in the community repos. Partimage does not currently support ext4 or btrfs filesystems. NTFS is experimental.
Disk cloning outside of Arch
If you wish to backup or propagate your Arch install root, you are probably better off booting into something else and clone the partition from there. Some suggestions:
- PartedMagic has a very nice live cd/usb with PartImage and other recovery tools.
- Mindi is a linux distribution specifically for disk clone backup. It comes with its own cloning program, Mondo Rescue.
- Acronis True Image is a commercial disk cloner for Windows. It allows you to create a live (from within Windows), so you do not need a working Windows install on the actual machine to use it. After registration of the Acronis software on their website, you will be able to download a Linux-based Live CD and/or plugins for BartPE for creation of the Windows-based live CD. It can also create a WinPE Live CD based on Windows. The created ISO Live CD image by Acronis doesn't have the hybrid boot ability and cannot be written to USB storage as a raw file.
- FSArchiver allows you to save the contents of a file system to a compressed archive file. Can be found on the System Rescue CD.
- Clonezilla is an enhanced partition imager which can also restore entire disks as well as partitions. Clonezilla is included on the Arch Linux installation media.
- Redo Backup and Recovery is a Live CD featuring a graphical front-end to partclone.
Another type of backups are those used in case of a disaster. These include application that allow easy backup of entire filesystems and recovery in case of failure, usually in the form of a Live CD or USB drive. They contain complete system images from one or more specific points in time and are frequently used to record known good configurations.
See also Disk cloning.
- Arch Backup — A trivial backup script with simple configuration.
- Configurable compression method.
- Multiple backup targets.
- Clonezilla — A disaster recovery, disk cloning, disk imaging and deployment solution.
- Boots from live CD, USB flash drive, or PXE server.
- Supports ext2, ext3, ext4, reiserfs, reiser4, xfs, jfs, btrfs FAT32, NTFS, HFS+ and others.
- Uses Partclone (default), Partimage (optional), ntfsclone (optional), or dd to image or clone a partition.
- Multicasting server to restore to many machines at once.
- FSArchiver — A safe and flexible file-system backup and deployment tool
- Support for basic file attributes (permissions, owner, ...).
- Support for multiple file-systems per archive.
- Support for extended attributes (they are used by SELinux).
- Support the basic file-system attributes (label, uuid, block-size) for all linux file-systems.
- Support for ntfs filesystems (ability to create flexible clones of a Windows partitions).
- Checksumming of everything which is written in the archive (headers, data blocks, whole files).
- Ability to restore an archive which is corrupt (it will just skip the current file).
- Multi-threaded lzo, gzip, bzip2, lzma compression.
- Support for splitting large archives into several files with a fixed maximum size.
- Encryption of the archive using a password. Based on blowfish from libcrypto from OpenSSL.
- Support backup of a mounted root filesystem (-A option).
- Mondo Rescue — A disaster recovery solution to create backup media that can be used to redeploy the damaged system.
- Image-based backups, supporting Linux/Windows.
- Compression rate is adjustable.
- Can backup live systems (without having to halt it).
- Can split image over many files.
- Supports booting to a Live CD to perform a full restore.
- Can backup/restore over NFS, from CDs, tape drives and and other media.
- Can verify backups.
- http://www.mondorescue.org/ || AUR
- Partclone — A tool that can be used to back up and restore a partition while considering only used blocks.
- Supports ext2, ext3, hfs+, reiser3.5, reiser3.6, reiser4, ext4 and btrfs.
- Supports compression.
- Partimage — A disk cloning utility for Linux/UNIX environments.
- Has a Live CD.
- Supports the most popular filesystems on Linux, Windows and Mac OS.
- Saving to multiple CDs or DVDs or across a network using Samba/NFS.
- Q7Z — P7Zip GUI for Linux, which attempts to simplify data compression and backup. It can create the following archive types: 7z, BZip2, Zip, GZip, Tar.
- Updates existing archives quickly.
- Backup multiple folders to a storage location.
- Create or extract protected archives.
- Lessen effort by using archiving profiles and lists.
- http://k7z.sourceforge.net/ || AUR
- Redo Backup and Recovery — A backup and disaster recovery application that runs from a bootable Linux CD image.
- System Tar & Restore — Backup and Restore your system using tar or Transfer it with rsync
- CLI and Dialog interfaces
- Easy backup and restore wizards
- Creates .tar.gz, .tar.bz2, .tar.xz or .tar archives
- Supports openssl / gpg encryption
- Uses rsync to transfer a running system
- Supports Grub2, Syslinux, EFISTUB/efibootmgr and Systemd/bootctl