Difference between revisions of "Display Power Management Signaling"

From ArchWiki
Jump to: navigation, search
m (improved for loop, added note about using tee to append to terminal device for perm workaround??)
m (Prevent screen from turning off (in console))
Line 72: Line 72:
== Prevent screen from turning off (in console) ==
== Prevent screen from turning off (in console) ==
$ setterm -blank 0 -powerdown 0
{{cli|setterm -blank 0 -powerdown 0}}
==Pipe the output to a cat to see the escapes ==
==Pipe the output to a cat to see the escapes ==

Revision as of 02:07, 6 August 2010

Template:I18n links start Template:I18n entry Template:I18n entry Template:I18n links end

DPMS (Display Power Management Signaling) is a technology that allows power saving behaviour of monitors when the computer is not in use.

Setting up DPMS in X

Add the following to your /etc/X11/xorg.conf in the Monitor section:

Option "DPMS" "true"

Add the following to the ServerLayout section, change the times (in minutes) as necessary:

Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "30"

Note: If the "OffTime" option does not work replace it with the following, (change the "blanktime" to "0" to disable screen blanking)

Option         "BlankTime" "30"

DPMS Interaction using xset

It is possible to turn off your monitor using the xset tool.

xset dpms force standby

puts the screen(s) into standby,

xset dpms force suspend

makes them to suspend and

xset dpms force off

turns them off immediately. If you leave your computer, you don't need to wait for the timeout you set that the display turns off. Simply enfoce it by using the xset command.

Note that you may need to prefix the command with sleep 1; for it to work correctly. For example,

sleep 1; xset dpms force off

You could also copy this script: Template:File

Make it executable (chmod u+x /usr/local/bin/display.sh) and just run display.sh off. For the latter to work you need to include /usr/local/bin into your path, otherwise you have to execute it with the whole path:

# With /usr/local/bin in your PATH
display.sh suspend

# Without /usr/local/bin in your PATH
/usr/local/bin/display.sh standby

Disable DPMS and prevent screen from turning off (thanks damir)

Useful when watching movies or slideshows:

The first command turns off DPMS

xset -dpms

This one disables screen saver blanking:

xset s off

DPMS Interaction in a console with setterm

The setterm utility issues terminal recognized escape codes to alter the terminal. Essentially it just echos the terminal sequence to the current terminal device, whether that be in screen, a remote ssh terminal, console mode, serial consoles, etc.

Prevent screen from turning off (in console)


Pipe the output to a cat to see the escapes

$ setterm -powerdown 2>&1 | exec cat -v 2>&1 | sed "s/\\^\\[/\\\\033/g"

Pipe the escapes to any tty (with write/append perms) to modify that terminal

Note the use of >> instead of >. For permission issues using sudo in a script or something, you can use the tee program to append the output of setterm to the tty device, which tty's let appending sometimes but not writing.

$ setterm -powerdown 0 > /dev/tty3
$ for TTYNUM in {0..256}; do setterm -powerdown 0 >> /dev/tty${TTYNUM}; done

External Resources