Display Power Management Signaling

From ArchWiki
Revision as of 13:38, 26 February 2012 by Aroko (Talk | contribs) (Heavily reorganized the page, also removed some obvious details.)

Jump to: navigation, search

This template has only maintenance purposes. For linking to local translations please use interlanguage links, see Help:i18n#Interlanguage links.

Local languages: Català – Dansk – English – Español – Esperanto – Hrvatski – Indonesia – Italiano – Lietuviškai – Magyar – Nederlands – Norsk Bokmål – Polski – Português – Slovenský – Česky – Ελληνικά – Български – Русский – Српски – Українська – עברית – العربية – ไทย – 日本語 – 正體中文 – 简体中文 – 한국어

External languages (all articles in these languages should be moved to the external wiki): Deutsch – Français – Română – Suomi – Svenska – Tiếng Việt – Türkçe – فارسی

DPMS (Display Power Management Signaling) is a technology that allows power saving behaviour of monitors when the computer is not in use.

Setting up DPMS in X

Note: As of Xorg 1.8 DPMS is auto detected and enabled if ACPI is also enabled at kernel runtime.

Add the following to your /etc/X11/xorg.conf in the Monitor section:

Option "DPMS" "true"

Add the following to the ServerLayout section, change the times (in minutes) as necessary:

Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "30"
Note: If the "OffTime" option does not work replace it with the following, (change the "blanktime" to "0" to disable screen blanking)
Option         "BlankTime" "30"

As with newer versions of X it is recommended to use different .conf files instead of a xorg.conf, an example file /etc/X11/xorg.conf.d/10-monitor.conf could look like this.

Section "Monitor"
    Identifier "LVDS0"
    Option "DPMS" "false"

Section "ServerLayout"
    Identifier "ServerLayout0"
    Option "BlankTime"  "0"
    Option "StandbyTime" "0"
    Option "SuspendTime" "0"
    Option "OffTime" "0"

Modifing DPMS and screensaver settings using xset

It is possible to turn off your monitor using the xset tool. Note if using this command manually in a shell you may need to prefix it with sleep 1; for it to work correctly. For example:

sleep 1; xset dpms force off

To control Energy Star (DPMS) features (a timeout value of zero disables the mode):

xset -dpms Energy Star features off
xset +dpms Energy Star features on
xset dpms [standby [suspend [off]]]     
xset dpms force standby 
xset dpms force suspend 
xset dpms force off 
xset dpms force on  (also implicitly enables DPMS features)

xset screen-saver control

You can use xset to control your screensaver:

xset s [timeout [cycle]]  
xset s default    
xset s on
xset s blank              
xset s noblank    
xset s off
xset s expose             
xset s noexpose
xset s activate           
xset s reset

To see your current settings

$ xset q


Screen Saver:
  prefer blanking:  yes    allow exposures:  yes
  timeout:  600    cycle:  600
DPMS (Energy Star):
  Standby: 600    Suspend: 600    Off: 600
  DPMS is Enabled
  Monitor is On


Turn off DPMS

xset -dpms

Disable screen saver blanking

xset s off

Disable DPMS and prevent screen from blanking

Useful when watching movies or slideshows:

xset -dpms; xset s off

Turn off screen immediately

If you leave your computer, you do not need to wait for the timeout you set that the display turns off. Simply enforce it by using the xset command.

xset dpms force off

Put screen into standby

xset dpms force standby

Put screen into suspend

xset dpms force suspend

Change Blank time from 5 min to 1 hour

xset s 3600 3600

xset display.sh

You could also copy this script:

# Small script to set display into standby, suspend or off mode
# 20060301-Joffer

case $1 in
    xset dpms force $1
    echo "Usage: $0 standby|suspend|off"

Make it executable (chmod u+x /usr/local/bin/display.sh) and just run display.sh off. For the latter to work you need to include /usr/local/bin into your path.

DPMS interaction in a console with setterm

The setterm utility issues terminal recognized escape codes to alter the terminal. Essentially it just writes/echos the terminal sequences to the current terminal device, whether that be in screen, a remote ssh terminal, console mode, serial consoles, etc.

setterm Syntax: (0 disables)

setterm -blank [0-60|force|poke]
setterm -powersave [on|vsync|hsync|powerdown|off]
setterm -powerdown [0-60]
Note: If you haven't already read the brief DPMS article linked to below, please skim it to understand how DPMS can be used in the console the same as in X.

Prevent screen from turning off (in console)

$ setterm -blank 0 -powerdown 0

Alternatively you can disable console blanking permanently using the following command:

# echo -ne "\033[9;0]" >> /etc/issue

Pipe the output to a cat to see the escapes

$ setterm -powerdown 2>&1 | exec cat -v 2>&1 | sed "s/\\^\\[/\\\\033/g"

Pipe the escapes to any tty (with write/append perms) to modify that terminal

Note the use of >> instead of >. For permission issues using sudo in a script or something, you can use the tee program to append the output of setterm to the tty device, which tty's let appending sometimes but not writing.

$ setterm -powerdown 0 > /dev/tty3

Bash loop to set ttys 0-256

$ for i in {0..256}; do setterm -powerdown 0 >> /dev/tty$i; done; unset i;


xset DPMS settings do not work with xscreensaver

xscreensaver uses it's own DPMS settings. See the settings for xscreensaver for more information.

xscreensaver DPMS

You can configure xscreensaver's DPMS settings manually by editing your ~/.xscreensaver file as below, or using the xscreensaver-demo gui.

timeout:	1:00:00
cycle:		0:05:00
lock:		False
lockTimeout:	0:00:00
passwdTimeout:	0:00:30
fade:		True
unfade:		False
fadeSeconds:	0:00:03
fadeTicks:	20
dpmsEnabled:	True
dpmsStandby:	2:00:00
dpmsSuspend:	2:00:00
dpmsOff:	4:00:00

External Resources