Enhance system stability
The purpose of this wiki article is to provide tips and best practices on how to make an Arch Linux system as stable as possible. While Arch Developers and Trusted Users work hard to produce high quality packages, given Arch's rolling release system and rapid package turnover, an Arch system may not be suitable for a mission critical, commercial production environment.
However, Arch is inherently stable due to its commitment to simplicity in configuration, coupled with a rapid bug-report/bug-fix cycle, and the use of unpatched upstream source code. Thus, by following the advice below on setting up and maintaining Arch, the user should be able to enjoy a very stable system. Furthermore, advice is included that will ease system repair in the event of a major malfunction.
How stable can Arch Linux really be? There are numerous reports in the Arch forums of skilled system administrators successfully using Arch for production servers. Archlinux.org is one such example. On the desktop, a properly configured and maintained Arch installation can offer excellent stability.
- 1 Maintaining Arch
- 1.1 Read before upgrading the system
- 1.2 Act on alerts during an upgrade
- 1.3 Deal promptly with new configuration files
- 1.4 Avoid certain pacman commands
- 1.5 Use up-to-date mirrors
- 1.6 Revert package upgrades that cause instability
- 1.7 Be careful with unofficial and less tested packages
- 2 Generic best practices
- 2.1 Use the package manager to install software
- 2.2 Use proven software packages
- 2.3 Use recommended configurations
- 2.4 Choose open-source drivers
- 2.5 Follow NVD/CVE alerts
- 2.6 Test updates on a non-critical system
- 2.7 Always back up config files before editing
In addition to configuring Arch for stability, there are steps one can take during maintenance which will enhance stability. Paying attention to a few SysAdmin details will help to ensure continued system reliability.
For repetitive tasks that need to be done regularly see System maintenance.
Read before upgrading the system
Before upgrading Arch, always read the latest Arch News to find out if there are any major software or configuration changes with the latest packages. Before upgrading fundamental software (such as the kernel, xorg, systemd, or ) to a new version, look over the appropriate forum to see if there have been any reported problems.
Act on alerts during an upgrade
When upgrading the system, be sure to pay attention to the alert notices provided by pacman. If any additional actions are required by the user, be sure to take care of them right away. If a pacman alert is confusing, search the forums and the recent news posts for more detailed instructions.
Deal promptly with new configuration files
When pacman is invoked
.pacorig files can be created. Pacman provides notice when this happens and users must deal with these files promptly. Users are referred to the Pacnew and Pacsave files wiki page for detailed instructions.
Also, think about other configuration files you may have copied or created. If a package had an example configuration that you copied to your home directory, check to see if a new one has been created.
Avoid certain pacman commands
Avoid doing partial upgrades, i.e. never run
pacman -Sy and instead use
Avoid using the
--force option with pacman, especially in commands such as
pacman -Syu --force involving more than one package. The
--force option ignores file conflicts and can even cause file loss when files are relocated between different packages! In a properly maintained system, it should never need to be used.
Do not use
pacman -Rdd package. Using the
-d flag skips dependency checks during package removal. As a result, a package providing a critical dependency could be removed, resulting in a broken system.
Use up-to-date mirrors
Use mirrors that are frequently updated with the latest packages from the main Arch FTP server. Review the Mirror Status webpage to verify that your chosen mirror is up to date. By using recently rsync'd mirrors, this ensures that your system will always have the freshest packages and package databases available during the course of routine maintenance.
Also, if it is used, edit the mirror list in
/etc/pacman.d by placing local mirrors, those within your country or region, at the top of the list. Refer to the Mirrors#Enabling a specific mirror for additional details, including the installation of the rankmirrors script to enable the fastest mirrors. These steps will ensure that the system uses the fastest, most reliable mirrors.
Revert package upgrades that cause instability
In the event that a particular package upgrade results in system instability, install the last known stable version of the package from the local pacman cache using the following command:
pacman -U /var/cache/pacman/pkg/Package-Name.pkg.tar.gz
For more detailed information on reverting to older packages, consult the Arch wikipage, Downgrading packages.
Once the package is reverted, temporarily add it to the IgnorePkg section of pacman.conf, until the difficulty with the updated package is resolved. Consult the Arch wiki and/or webforums for advice, and file a bug report if necessary.
Install the linux-lts package
The core repository. This particular kernel version has long-term support (LTS) from upstream, including security fixes and some feature backports. It can be used by those who want a fallback kernel in case a new kernel version causes problems.package is an alternative Arch kernel package, and is available in the
To make it available as a boot option, you will need to update the bootloader's configuration file. For Syslinux, you have to edit
/boot/syslinux/syslinux.cfg and duplicate the current entries, except using
initramfs-linux-lts.img. For GRUB, the recommended method is to automatically re-generate the configuration file.
Be careful with unofficial and less tested packages
Avoid any use of the testing repository, or individual packages from testing. These packages are experimental and not suitable for a stable system.
Use precaution when using packages from the AUR or an unofficial user repository. Most are supplied by regular users and thus may not have the same standards as those in the official repositories. Be careful with AUR helpers which highly simplify installation of AUR packages. Always check PKGBUILDs for sanity and signs of mistake or malicious code before building and/or installing the package.
To simplify maintenance, limit the amount of unofficial packages used. Make periodic checks on which are in actual use, and remove (or replace with their official counterparts) any others. See pacman/Tips and tricks#Maintenance for useful commands.
Avoid development packages
To prevent breakage of the system, do not install any development packages, unless recommended explicitly. These are usually found in AUR, occasionally in the community repository, and are packages taken directly from upstream development branches. They usually feature one of the following words appended to the package name: "dev", "devel", "svn", "cvs", "git", "hg", "bzr", or "darcs".
In particular, avoid installing development versions of crucial system packages such as the kernel or glibc.
Generic best practices
Use the package manager to install software
Pacman does a much better job than you at keeping track of files. If you install things manually you will, sooner or later, forget what you did, where you installed to, install conflicting software, install to the wrong locations, etc.
From a stability standpoint you should try to avoid unsupported package and custom software, but if you really need such things making a package is better than manually compiling and installing.
Use proven software packages
Install mature and proven software; while avoiding cutting edge software that is still buggy. Do not deploy newly developed software until it is proven to be reliable. For example, PulseAudio's early versions could be unreliable. Users interested in maximum stability would use the ALSA sound system instead. Finally, use software that has a strong and active development community, as well as a high number of competent users.
Use recommended configurations
In the detailed Arch Linux installation and configuration documentation, there is often more than one way to configure a specific aspect of the system. Always choose the recommended, default configuration when setting up the system. The recommended, default configurations reflect best practices, chosen for optimum system stability and ease of system repair.
Choose open-source drivers
Wherever possible, choose open source drivers. Try to avoid proprietary drivers. Most of the time, open source drivers are more stable and reliable than proprietary drivers. Open source driver bugs are fixed more easily and quickly. While proprietary drivers can offer more features and capabilities, this can come at the cost of stability. To avoid this dilemma, choose hardware components known to have mature open source driver support with full features. Information about hardware with open source Linux drivers is available at linux-drivers.org.
Follow NVD/CVE alerts
Subscribe to the Common Vulnerabilities and Exposure Security Alert updates, made available by National Vulnerability Database, and found on the NVD Download webpage. See also Arch CVE Monitoring Team and CVE-2014.
Test updates on a non-critical system
If possible, test changes to configuration files, as well as updates to software packages, on a non-critical duplicate system first. Then, if no problems arise, roll out the changes to the production system.
Always back up config files before editing
Before editing any configuration file, always back up a known working version of that config file. In the event that changes in the config file cause problems, one can revert to the previous stable config file. Do this from a text editor by first saving the file to a backup copy before making any alterations; or execute the following command:
cp config config~
Using ~ will ensure there is a readily distinguishable human-made backup conf file if pacman creates a .pacnew, .pacsave, or .pacorig file using the active config file.
etckeeper can help dealing with config files. It keeps the whole
/etc directory in a version control.
Periodically clean configuration files
Old configuration files may conflict with newer software versions, or corrupt over time. Remove unneeded configurations periodically, particularly in your home folder and
~/.config. For similar reasons, be careful when sharing home folders between installations.