EPSXe playstation emulator

From ArchWiki
Revision as of 04:13, 24 January 2007 by Snowman (Talk | contribs)

Jump to: navigation, search


About

This is a guide to install the freeware Playstation emulator ePSXe. It is based on this guide, which is a bit outdated.

Legal note: The installation and use of this emulator requires a Sony PlayStation BIOS file. You may not use such a file to play games in a PSX emulator if you do not own a Sony PlayStation, Sony PSOne or Sony PlayStation 2 console. Owning the BIOS image without owning the actual console is a violation of copyright law. You have been warned.

Installation

First, open a console and install the packages that you will need:

pacman -Sy unzip gtk

Get the ePSXe base package:

wget http://www.epsxe.com/files/epsxe160lin.zip

Extract the ePSXe package and set up permissions:

mkdir /usr/share/epsxe
export EPSXE='/usr/share/epsxe'
unzip -d $EPSXE ~/epsxe160lin.zip
cd $EPSXE
chmod 777 cfg sstates snap memcards
touch memcards/epsxe000.mcr memcards/epsxe001.mcr .epsxerc
chmod 666 memcards/* 
chmod 666 .epsxerc

If you own a Playstation system, get the PSX Bios _somewhere.around.the.internet_ put it in your home folder and:

mv ~/SCPH1001.BIN $EPSXE/bios/

You can run the emulator with either software render or hardware acceleration plugin. The latter requires a NVIDIA, ATI, or similar card with working OpenGL drivers. You can install both and use the one that works best for you. The hardware acceleration plugin in this how-to apperantly requires a quite new card (not known how new though). If it doesn't work there is an older plugin that uses MesaGL. Look here.

Install hardware acceleration plugin:

cd ~
wget http://www.pbernert.com/gpupetexgl208.tar.gz
tar xfz ~/gpupetexgl208.tar.gz -C $EPSXE/plugins/
mv $EPSXE/plugins/cfgPeteXGL2 $EPSXE/cfg/
mv $EPSXE/plugins/gpuPeteXGL2.cfg $EPSXE/cfg/
chmod 666 $EPSXE/cfg/gpuPeteXGL2.cfg

Install software render plugin:

cd ~
wget http://www.pbernert.com/gpupeopssoftx117.tar.gz
tar xfz ~/gpupeopssoftx117.tar.gz -C $EPSXE/plugins/
mv $EPSXE/plugins/cfgPeopsSoft $EPSXE/cfg/
mv $EPSXE/plugins/gpuPeopsSoftX.cfg $EPSXE/cfg/
chmod 666 $EPSXE/cfg/gpuPeopsSoftX.cfg

Install audio plugin (uses the OSS sound daemon):

cd ~
wget http://www.pbernert.com/spupeopsoss109.tar.gz
tar xvfz ~/spupeopsoss109.tar.gz -C $EPSXE/plugins/
mv $EPSXE/plugins/cfgPeopsOSS $EPSXE/cfg/

Create a shell script that will start ePSXe:

nano /usr/bin/epsxe

and paste this:

#!/bin/bash
export EPSXE='/usr/share/epsxe'
export LD_LIBRARY_PATH=$EPSXE
cd $EPSXE
./epsxe
chmod 666 $EPSXE/cfg/*.cfg $EPSXE/sstates/* \
$EPSXE/memcards/*.mcr $EPSXE/snap/* 2>/dev/null

Save it and change permissions for the new file:

chmod 777 /usr/bin/epsxe

You can now start by typing 'epsxe' in the terminal.

Configuration

  • In the menu, open "Config -> BIOS", and set it to /usr/share/epsxe/bios/SCPH1001.BIN
  • Open "Config -> Video", and select either "Pete's XGL2 Driver 2.7" or "P.E.Op.S. Softx Driver 1.17". Click configure, then OK to write a config file. Verify that it is working by clicking the Test button.
  • In "Config -> Sound" select "P.E.Op.S. OSS Audio Driver", Configure, OK. Verify with the Test button.
  • In Config -> CDROM, set the path to your CD/DVD-ROM. In most cases it should be /dev/cdrom but in some /dev/hdc. You can check your path by typing "mount |grep cd" in a console.
  • In Config -> Game Pad -> Pad 1 menu, you can set up the controls.

Now you should be all set.

If you want to use an original PSX CD-ROM, insert it and select "File -> Run CDROM" It might take a while for the game to load, so be patient.

You can load backup ISO:s from your hard disk with "File -> Run ISO.

When you are running your game you can press Esc any time to exit, save/load game states, or change discs. To get back, select Run -> Continue.

Links

ePSXe - http://www.epsxe.com/

Pete's PSX plugins - http://www.pbernert.com/index.htm