Difference between revisions of "Fail2ban"

From ArchWiki
Jump to: navigation, search
m (Custom SSH jail: not important for this example)
m (Fail2ban: its not a blacklist. It does not contain list of IPs to ban.)
(5 intermediate revisions by the same user not shown)
Line 8: Line 8:
 
[[ro:Fail2ban]]
 
[[ro:Fail2ban]]
 
[[ru:Fail2ban]]
 
[[ru:Fail2ban]]
{{Warning|Using an IP blacklist will stop trivial attacks but it relies on an additional daemon and successful logging (the partition containing /var can become full, especially if an attacker is pounding on the server). Additionally, if the attacker knows your IP address, they can send packets with a spoofed source header and get you locked out of the server. [[SSH keys]] provide an elegant solution to the problem of brute forcing without these problems.}}
+
[http://www.fail2ban.org/wiki/index.php/Main_Page Fail2ban] scans log files (e.g. {{ic|/var/log/httpd/error_log}}) and bans IPs that show the malicious signs like too many password failures, seeking for exploits, etc. Generally Fail2Ban is then used to update firewall rules to reject the IP addresses for a specified amount of time, although any arbitrary other action (e.g. sending an email) could also be configured.  
  
[http://www.fail2ban.org/wiki/index.php/Main_Page Fail2ban] scans various textual log files and bans IP that makes too many password failures by updating firewall rules to reject the IP address, similar to [[Sshguard]].
+
{{Warning|Using an IP banning software will stop trivial attacks but it relies on an additional daemon and successful logging. Additionally, if the attacker knows your IP address, they can send packets with a spoofed source header and get your IP address banned.}}
 
 
{{Warning|For correct function it is essential that the tool parses the IP addresses in the log correctly. You should always '''test''' the log filters work as intended per application you want to protect.}}
 
  
 
== Installation ==
 
== Installation ==
Line 56: Line 54:
  
 
Jails for many different services are already present in {{ic|/etc/fail2ban/jail.conf}} but not enabled by default. You can copy the section headers into a .local file of your choice, enable them (and optionally override settings).
 
Jails for many different services are already present in {{ic|/etc/fail2ban/jail.conf}} but not enabled by default. You can copy the section headers into a .local file of your choice, enable them (and optionally override settings).
 
=== Paths ===
 
 
There is currently basic support for archlinux, to activate that configuration, add or alter the following section in the {{ic|jail.local}} file:
 
[INCLUDES]
 
before = paths-arch.conf
 
  
 
[[Restart]] {{ic|fail2ban.service}} to test your configuration. Watch out for "file not found errors" from ''fail2ban-client'' if the fail2ban service fails to start. Adjust the paths {{ic|paths-arch.conf}} or {{ic|jail.local}} as needed. Many of the default jails might not work out of the box.
 
[[Restart]] {{ic|fail2ban.service}} to test your configuration. Watch out for "file not found errors" from ''fail2ban-client'' if the fail2ban service fails to start. Adjust the paths {{ic|paths-arch.conf}} or {{ic|jail.local}} as needed. Many of the default jails might not work out of the box.
  
 
=== Custom SSH jail ===
 
=== Custom SSH jail ===
 +
 +
{{Warning|If the attacker knows your IP address, they can send packets with a spoofed source header and get your IP address locked out of the server. [[SSH keys]] provide an elegant solution to the problem of brute forcing without these problems.}}
  
 
Edit {{ic|/etc/fail2ban/jail.d/jail.conf}}, add this section and update the list of trusted IP addresses.
 
Edit {{ic|/etc/fail2ban/jail.d/jail.conf}}, add this section and update the list of trusted IP addresses.

Revision as of 09:12, 12 June 2018

ro:Fail2ban Fail2ban scans log files (e.g. /var/log/httpd/error_log) and bans IPs that show the malicious signs like too many password failures, seeking for exploits, etc. Generally Fail2Ban is then used to update firewall rules to reject the IP addresses for a specified amount of time, although any arbitrary other action (e.g. sending an email) could also be configured.

Warning: Using an IP banning software will stop trivial attacks but it relies on an additional daemon and successful logging. Additionally, if the attacker knows your IP address, they can send packets with a spoofed source header and get your IP address banned.

Installation

Install fail2ban.

If you want Fail2ban to send an email when someone has been banned, you have to configure SSMTP (for example).

systemd

Enable the fail2ban.service unit.

Hardening

Currently, fail2ban must be run as root. Therefore, you may wish to consider hardening the process with systemd. Ref:systemd for Administrators, Part XII

Capabilities

For added security, consider limiting fail2ban capabilities by specifying CapabilityBoundingSet in the drop-in configuration file for the provided fail2ban.service:

/etc/systemd/system/fail2ban.service.d/capabilities.conf
[Service]
CapabilityBoundingSet=CAP_DAC_READ_SEARCH CAP_NET_ADMIN CAP_NET_RAW

In the example above, CAP_DAC_READ_SEARCH will allow fail2ban full read access, and CAP_NET_ADMIN and CAP_NET_RAW allow setting of firewall rules with iptables. Additional capabilities may be required, depending on your fail2ban configuration. See capabilities(7) for more info.

Filesystem Access

Note: On some systems this might lead to fail2ban not working. So, first try without, before hardening fail2ban

Consider limiting file system read and write access by using ReadOnlyDirectories and ReadWriteDirectories, under the [Service] section. For example:

ReadOnlyDirectories=/
ReadWriteDirectories=/var/run/fail2ban /var/lib/fail2ban /var/spool/postfix/maildrop /tmp /var/log/fail2ban

In the example above, this limits the file system to read-only, except for /var/run/fail2ban for pid and socket files, and /var/spool/postfix/maildrop for postfix sendmail. Again, this will be dependent on you system configuration and fail2ban configuration. The /tmp directory is needed for some fail2ban actions. Note that adding /var/log/fail2ban is necessary if you want fail2ban to log its activity. Make sure all the directories exist, or you will get error code 226 on starting the service. And modify logtarget in /etc/fail2ban/fail2ban.conf:

logtarget = /var/log/fail2ban/fail2ban.log

Configuration

Note: Due to the possibility of the jail.conf file being overwritten or improved during a distribution update, it is recommended to provide customizations in a jail.local file, or separate .conf files under the jail.d/ directory, e.g. jail.d/ssh-iptables.conf.

Default jails

Jails for many different services are already present in /etc/fail2ban/jail.conf but not enabled by default. You can copy the section headers into a .local file of your choice, enable them (and optionally override settings).

Restart fail2ban.service to test your configuration. Watch out for "file not found errors" from fail2ban-client if the fail2ban service fails to start. Adjust the paths paths-arch.conf or jail.local as needed. Many of the default jails might not work out of the box.

Custom SSH jail

Warning: If the attacker knows your IP address, they can send packets with a spoofed source header and get your IP address locked out of the server. SSH keys provide an elegant solution to the problem of brute forcing without these problems.

Edit /etc/fail2ban/jail.d/jail.conf, add this section and update the list of trusted IP addresses.

If your firewall is iptables:

[DEFAULT]
bantime = 1d
ignoreip = 127.0.0.1/8

[sshd]
enabled  = true
filter   = sshd
action   = iptables
backend  = systemd
maxretry = 5
findtime = 1d
bantime  = 2w

fail2ban has IPv6 support since version 0.10. Adapt your firewall accordingly, e.g. start and enable ip6tables.service.

Note: If your firewall is shorewall, replace iptables with shorewall. You can also set BLACKLIST to ALL in /etc/shorewall/shorewall.conf, otherwise the rule added to ban an IP address will affect only new connections.

Also do not forget to add/change:

LogLevel VERBOSE

in your /etc/ssh/sshd_config. Else, password failures are not logged correctly.

See also