Fast Arch Install from existing Linux System
If you are running Linux already and don't have a CD writer---or if you simply want a faster install process---here is how to install Arch from another running Linux installation.
Read the Official Arch Linux Install Guide first so that you know what to expect.
You need one spare partition, at least as large as the Arch ISO image. Here I'm logged in as root and am using "/dev/sda12" which happens to be 6GB.
1) Write the ISO image onto the spare partition:
dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda12 bs=4k
2) Making or using a suitable mount point, mount the partition somewhere (you can specify -t iso9660, but mount should auto-detect the filesystem type):
mkdir /mnt/archCD mount /dev/sda12 /mnt/archCD
3) Read the kernel options in isolinux.cfg:
grep -e APPEND /mnt/archCD/boot/isolinux/isolinux.cfg
Remember the value of the initrd= and archisolabel= options; the other options are less important on most systems.
Booting the ISO with GRUB
1) Reboot the computer. When the GRUB menu appears, press 'c' for a command line.
3) Load the kernel:
kernel /boot/vmlinuz26 archisolabel=ARCH_201005
where ARCH_201005 is the value of archisolabel you memorized or wrote down above.
4) Load the initial ramdisk:
where /boot/archiso.img is the value of initrd you memorized or wrote down above.
Reusing the spare partition with Arch
1) The spare partition can be reclaimed after the installation by making a file system with "mkfs.reiser", "mkfs.ext4", or another mkfs program. Again, using /dev/sda12 as an example:
2) Then add the partition to /etc/fstab:
/dev/sda12 /mnt/spare reiserfs defaults,noatime,notail,noauto 0 0
3) Ensure that the mount point exists:
mkdir -p /mnt/spare
4) Mount the partition:
Booting the ISO with LILO
1) Edit lilo.conf to add:
image=/mnt/archCD/boot/vmlinuz26 label=archCD initrd=/mnt/archCD/boot/archiso.img append="archisolabel=ARCH_201005"
where /boot/archiso.img and ARCH_201005 are the values of initrd= and archisolabel= you memorized or wrote down above.
3) Reboot the computer; choose archCD at the LILO menu.