This article lists data recovery and undeletion options for Arch Linux. Please contribute to this page using the general format below, keeping it brief if possible.
- 1 Special notes
- 2 Foremost
- 3 Extundelete
- 4 Testdisk and PhotoRec
- 5 e2fsck
- 6 Working with raw disk images
- 7 Text file recovery
- 8 See also
Before you start
This page is mostly intended to be used for educational purposes. If you have accidentally deleted or otherwise damaged your valuable and irreplaceable data and have no previous experience with data recovery, turn off your computer immediately (Just press and hold the off button or pull the plug; do not use the system shutdown function) and seek professional help. It is quite possible and even probable that, if you follow any of the steps described below without fully understanding them, you will worsen your situation.
In the area of data recovery, it is best to work on images of disks rather than physical disks themselves. Generally, a failing drive's condition worsens over time. The goal ought to be to first rescue as much data as possible as early as possible in the failure of the disk and to then abandon the disk. The
dd, will repeatedly try to recover from errors and will read the drive front to back, then back to front, attempting to salvage data. They keep log files so that recovery can be paused and resumed without losing progress.
See Disk Cloning.
The image files created from a utility like ddrescue can then be mounted like a physical device and can be worked on safely. Always make a copy of the original image so that you can revert if things go sour!
A tried and true method of improving failing drive reads is to keep the drive cold. A bit of time in the freezer is appropriate, but be careful to avoid bringing the drive from cold to warm too quickly, as condensation will form. Keeping the drive in the freezer with cables connected to the recovering PC works great.
Do not attempt a filesystem check on a failing drive, as this will likely make the problem worse. Mount it read-only.
Backup flash media/small partitions
As an alternative to working with a 'live' partition (mounted or not), it is often preferable to work with an image, provided that the filesystem in question is not too large and that you have sufficient free HDD space to accommodate the image file. For example, flash memory devices like thumb drives, digital cameras, portable music players, cellular phones, etc. are likely to be small enough to image in many cases.
Be sure to read the man pages for the utilities listed below to verify that they are capable of working with image files.
To make an image, one can use
dd as follows:
# dd if=/dev/target_partition of=/home/user/partition.image
Working with digital cameras
In order for some of the utilities listed in the next section to work with flash media, the device in question needs to be mounted as a block device (i.e., listed under /dev). Digital cameras operating in PTP (Picture Transfer Protocol) mode will not work in this regard. PTP cameras are transparently handled by libgphoto and/or libptp. In this case, "transparently" means that PTP devices do not get block devices. The alternative to PTP mode, USB Mass Storage (UMS) mode, is not supported by all cameras. Some cameras have a menu item that allows switching between the two modes; refer to your camera's user manual. If your camera does not support UMS mode and therefore cannot be accessed as a block device, your only alternative is to use a flash media reader and physically remove the storage media from your camera.
Foremost is a console program to recover files based on their headers, footers, and internal data structures. This process is commonly referred to as data carving. Foremost can work on disk image files (such as those generated by dd, Safeback, Encase, etc.) or directly on a drive. The headers and footers can be specified by a configuration file or command line switches can be used to specify built-in file types. These built-in types look at the data structures of a given file format, allowing for more reliable and faster recovery.
See Foremost article.
Extundelete is a terminal-based utility designed to recover deleted files from ext3 and ext4 partitions. It can recover all the recently deleted files from a partition and/or a specific file(s) given by relative path or inode information. Note that it works only when the partition is unmounted. The recovered files are saved in the current directory under the folder named
Derived from the post on Linux Poison.
To recover data from a specific partition, the device name for the partition, which will be in the format
/dev/sdXN (X is a letter and N is a number.), must be known. The example used here is
/dev/sda4, but your system might use something different (For example, MMC card readers use
/dev/mmcblkNpN as their naming scheme.) depending on your filesystem and device configuration. If you are unsure, run
df, which prints currently mounted partitions.
Once which partition data is to be recovered from has been determined, simply run:
# extundelete /dev/sda4 --restore-file directory/file
Any subdirectories must be specified, and the command runs from the highest level of the partition, so, to recover a file in
/home is on its own partition, run:
# extundelete /dev/sda4 restore-file SomeUserName/SomeFile
To speed up multi-file recovery, extundelete has a
--restore-files option as well.
To recover an entire directory, run:
# extundelete /dev/sda4 --restore-directory SomeUserName/SomeDirectory
For advanced users, to manually recover blocks or inodes with extundelete, debugfs can be used to find the inode to be recovered; then, run:
# extundelete --restore-inode inode
inode stands for any valid inode. Additional inodes to recover can be listed in an unspaced, comma-separated fashion.
Finally, to recover all deleted files from an entire partition, run:
# extundelete /dev/sda4 --restore-all
Testdisk and PhotoRec
TestDisk and Photorec are both open-source data recovery utilities licensed under the terms of the GNU Public License (GPL).
TestDisk is primarily designed to help recover lost partitions and/or make non-booting disks bootable again when these symptoms are caused by faulty software, certain types of viruses, or human error, such as the accidental deletion of partition tables.
PhotoRec is file recovery software designed to recover lost files including photographs (Hint: PhotographRecovery), videos, documents, archives from hard disks and CD-ROMs. PhotoRec ignores the filesystem and goes after the underlying data, so it will still work even with a re-formatted or severely damaged filesystems and/or partition tables.
official repositories provides both TestDisk and PhotoRec.from the
- Wiki (TestDisk): http://www.cgsecurity.org/wiki/TestDisk
- Wiki (Photorec): http://www.cgsecurity.org/wiki/PhotoRec
- Homepage: http://www.cgsecurity.org/
e2fsck is the ext2/ext3 filesystem checker included in the base install of Arch. e2fsck relies on a valid superblock. A superblock is a description of the entire filesystem's parameters. Because this data is so important, several copies of the superblock are distributed throughout the partition. With the
-b option, e2fsck can take an alternate superblock argument; this is useful if the main, first superblock is damaged.
To determine where the superblocks are, run
dumpe2fs -h on the target, unmounted partition. Superblocks are spaced differently depending on the filesystem's blocksize, which is set when the filesystem is created.
An alternate method to determine the locations of superblocks is to use the -n option with mke2fs. Be sure to use the
-n flag, which, according to the
mke2fs manpage, "Causes mke2fs to not actually create a filesystem, but display what it would do if it were to create a filesystem. This can be used to determine the location of the backup superblocks for a particular filesystem, so long as the mke2fs parameters that were passed when the filesystem was originally created are used again. (With the -n option added, of course!)".
Bothand are included in the base Arch install.
- e2fsck man page: http://phpunixman.sourceforge.net/index.php/man/e2fsck/8
- dumpe2fs man page: http://phpunixman.sourceforge.net/index.php?parameter=dumpe2fs&mode=man
Working with raw disk images
If you have backed up a drive using ddrescue or dd and you need to mount this image as a physical drive, see this section.
Mount the entire disk
To mount a complete disk image to the next free loop device, use the
# losetup -f -P /path/to/image
-fflag mounts the image to the next available loop device.
-Pflag creates additional devices for every partition.
In order to be able to mount a partiton of a whole disk image, follow the steps above.
Once the whole disk image is mounted, a normal
mount command can be used on the loop device:
# mount /dev/loop0p1 /mnt/example
This command mounts the first partition of the image in loop0 to the folder to the mountpoint
/mnt/example. Remember that the mountpoint directory must exist!
Getting disk geometry
Once the entire disk image has been mounted as a loopback device, its drive layout can be inspected.
Using QEMU to Repair NTFS
With a disk image that contains one or more NTFS partitions that need to be
chkdsked by Windows since no good NTFS filesystem checker for Linux exists, QEMU can use a raw disk image as a real hard disk inside a virtual machine:
# qemu -hda /path/to/primary.img -hdb /path/to/DamagedDisk.img
Then, assuming Windows is installed on
primary.img, it can be used to check partitions on
Text file recovery
It's possible to find deleted plain text on a hard drive with a few commands. A preferably unique string from the file you are trying to recover is needed.
First, use the
strings command to dump all the text from a partition:
# strings /dev/sdXN > BigStringsFile
grep to filter through the content of BigStringsFile:
$ grep -i -200 "Unique string in text file" BigStringsFile > GrepOutputFile
-200option tells grep to print 200 lines of context from before and after each mach of the string. You may need to adjust this if the text you are looking for is very long.
Hopefully, the correct deleted data is now in GrepOutputFile.
- Data Recovery on the Ubuntu wiki