Difference between revisions of "Folding@home"

From ArchWiki
Jump to navigation Jump to search
(misc formatting, remove contractions)
Line 1: Line 1:
[[Category:Daemons and system services (English)]][[Category:Other desktop user's resources (English)]]
[[Category:Daemons and system services (English)]]
[[Category:Mathematics and science (English)]]
From the [http://aur.archlinux.org/packages.php?do_Details=1&ID=11852&O=0&L=&C=&K=folding&SB=&SO=&PP=&do_MyPackages=&do_Orphans=&SeB= AUR package page]: "''Folding@home is a distributed computing project which studies protein folding, misfolding, aggregation, and related diseases.''"
From the [http://aur.archlinux.org/packages.php?do_Details=1&ID=11852&O=0&L=&C=&K=folding&SB=&SO=&PP=&do_MyPackages=&do_Orphans=&SeB= AUR package page]: "''Folding@home is a distributed computing project which studies protein folding, misfolding, aggregation, and related diseases.''"

Revision as of 00:53, 7 September 2011

From the AUR package page: "Folding@home is a distributed computing project which studies protein folding, misfolding, aggregation, and related diseases."

Please see the Folding@home site for a fuller description.


Note: There are multiple versions of folding@home in the AUR. One is the i686 package, named foldingathome, which is used in the example below. The other is foldingathome-smp, which is the x86_64 client and uses symmetric multi-processing, a more efficient method.

Folding@home is no longer in the community repository due to licensing issues. However, it is still possible to build it from AUR. If you are familiar with PKGBUILDs and AUR then build it and skip to configuration.

To install manually, first download the tarball at the Folding@home AUR page. Open a console and untar the tarball. cd to the resulting directory and:

$ makepkg

and if there are no errors you will be left with a package called Template:Filename.


# pacman -U foldingathome-version-number.pkg.tar.gz

being sure to replace version-number first ;)

If all went well, Folding@home should now be installed.


Firstly, you will want to open your Template:Filename configuration file, with your editor of choice.

# nano /etc/conf.d/foldingathome

The config is self explanatory, if you wish to have Folding@home run as a user other than root (handy on single user systems, probably more secure on multi-user systems), or in a different group, then change these values.

Now run the Folding@home process for the first time with

# /etc/rc.d/foldingathome start

give it a few seconds and then run

# /etc/rc.d/foldingathome stop

You will find under your Template:Filename directory, either new files or a new folder, if you set the user variable in Template:Filename. You will find a file called client.cfg, either in the /opt/fah dir or the Template:Filename folder.

# nano /opt/fah/client.cfg


$ nano /opt/fah/FAH_USER/client.cfg  # Replace FAH_USER first

The most important settings here are:

  • username, username associated to the work-units you return (not related to the FAH_USER variable in Template:Filename).
  • team, the team number you wish to contribute points to (earned for work units returned), you will of course want to fill in 45032, the arch-linux team number.
  • bigpackets, defines whether you will accept memory intensive work loads. If you have no problem with Folding@home using up more of your RAM, then set this to big. Other settings are normal and small.
  • machineid, covered in the Multi-Core section.

After editing that, run

# /etc/rc.d/foldingathome start

again, to start Folding@home up.

Assuming it all ran correctly, you will want to put it in Template:Filename to run on startup, so

# nano /etc/rc.conf

and add @foldingathome to your DAEMONS array (the @ causes it to start in the background, so as not to slow startup, see Daemons).
Remember, this is @foldingathome-smp for the SMP client.

Folding@home is now installed and running.

Note: Ensure that the nscd daemon appears before foldingathome in the DAEMONS array of Template:Filename, otherwise starting foldingathome will fail with segmentation faults.

Multi-Core CPUs and Folding@home

A Quick Note On Hyperthreading

If you have a single-core hyperthreading CPU, you may be tempted to follow the multi-core instructions. It is highly recommenced that you do not do this as the Folding@home team prefers fewer results quickly, than more results slowly. There is also a time-limit on work-units, so if it runs slower, your work-units may not be returned in time, and so distributed to another user. If you have one core, run one folding process.

Multiple Folding@home Installs

It is very simple to set up an extra install, although after each (rare) upgrade of the Folding@home package, you will have to perform some maintenance, unless you wish to build separate packages with custom PKGBUILDS / scripts (beyond the scope of this tutorial). This method should also scale to however many cores/processors you have.

First, stop Folding@home if it is running

# /etc/rc.d/foldingathome stop


# cp -r /opt/fah /opt/fah2

If you wish to call it something different, then by all means do. This tutorial will assume you are using Template:Filename for your second install and that you have the FAH_USER directory.


$ rm -rf /opt/fah2/FAH_USER/work  /opt/fah2/FAH_USER/queue.dat

if they exist, this way the new process will not start working on the same work-unit as the original thread.

You now have to open up the configuration for the new process

$ nano /opt/fah2/FAH_USER/client.cfg

and change the machineid to a number different to the one in Template:Filename.

If you are using the bigpackets option in client.cfg, you should only have it set to yes for one of your Folding@home processes as it can overwhelm your system unless you have plenty of free RAM (1GB at least).

Editing Init Scripts

Now comes the fun part. A second init script needs to be created and a little editing needs to be done, but this way you can turn each process on and off as wanted and it is simpler than one script managing both.

First, some initial editing has to be done to the current script and saved under another name

# nano /etc/rc.d/foldingathome


. /etc/rc.conf
. /etc/rc.d/functions
. /etc/conf.d/foldingathome



This is to cut down on later maintenance.

Next, change

PID=`pidof -o %PPID /opt/fah/FAH504-Linux.exe`


PID=`pgrep -f /opt/fah/FAH${FAH_VER}-Linux.exe -u $FAH_USER`

The reason for this is that pidof detects the first and second Folding@home process as the same and so stopping one init script will kill both processes. On the other hand, pgrep will find the process' associated filename/location. The "-u $FAH_USER" part is tacked on as a precaution, in case you are doing something strange with Folding@home threads and users. You will also notice the FAH_VER has slipped in there.

There should be two more instances of Template:Filename, change them to


Next, find the lines

add_daemon foldingathome
rm_daemon foldingathome 

and change them to something like

add_daemon foldingathome1
rm_daemon foldingathome1 

You can also change the

stat_busy "Starting Folding@home"

stat_busy "Stopping Folding@home"

lines to have some extra description such as "on Core 1" if you need to.

Now save the file as Template:Filename , this is to prevent it being over-written by a package upgrade.

Make a copy of the script

# cp /etc/rc.d/foldingathome1 /etc/rc.d/foldingathome2

Now you have to find and replace instances of /opt/fah with /opt/fah2 in this script, double checking you are not getting any false positives (there should not be any, but scripts change). Make sure you get the one in the PID variable, otherwise the whole pgrep bit was a bit pointless ;)

Also, find the lines

add_daemon foldingathome1
rm_daemon foldingathome1

again, and change them to something like

add_daemon foldingathome2
rm_daemon foldingathome2 

Now, save this script and open up /etc/rc.conf and add @foldingathome1 and @foldingathome2 to the DAEMONS variable. Start up the two processes

# /etc/rc.d/foldingathome1 start
# /etc/rc.d/foldingathome2 start

and if all goes well, you have got 2 Folding@home processes running!


When upgrading the Folding@home package, it is recommended you stop both Folding@home init-scripts first

# /etc/rc.d/foldingathome1 stop
# /etc/rc.d/foldingathome2 stop

On upgrading, Template:Filename will be replaced with a new version, this needs to be copied into your Template:Filename directory and the old executable deleted.

You then just have to change the FAH_VER variable in both scripts to reflect the new version number. You can then restart both scripts with

# /etc/rc.d/foldingathome1 start
# /etc/rc.d/foldingathome2 start

It may also be worth checking that there have been no other significant changes to the updated original script.

Alternative: Single Init Script

I could not get the above method to work with the current (6.02) version of the client. I found an old script on the forums and modified it slightly which works just fine on my system.

# Starts the Folding@home client in the background

. /etc/rc.d/functions

case "$1" in
    stat_busy "Starting Folding@home"
    cd /opt/fah/
    /opt/fah/fah6 > /opt/fah/myfah.log &
    cd /opt/fah2/
    /opt/fah2/fah6 > /opt/fah2/myfah.log &
    stat_busy "Stopping Folding@home"
    killall fah6
    echo $"Usage: $0 {start|stop|restart}"

exit 0

Just make sure you do not forget to follow the first section under "Setting up Multiple Folding@home installs".

Folding@home SMP Support

There is now a Folding@home client available for 64-bit multi-processor or multi-core computers (aka SMP). The creators of Folding@home suggest the SMP client runs best on quad core machines but many people run it on dual cores with no trouble. This client is definitely NOT recommended for single-core CPUs with Hyperthreading. So, if your machine meets the requirements (Arch 64-bit, true multi-core/processor) you may want to give the SMP client a try instead of running two of the standard client!

Setup is identical to that of the standard client EXCEPT for the following:


When migrating from the standard FAH client/s to SMP, you may wish to finish off the work units currently running but without the FAH client downloading new ones. This is possible through the init-scripts as long as you make sure to check the status of the current work-unit before shutting down / rebooting.

This may seem a bit over the top and whether you do it depends on how committed you are to returning all work-units sent to your box. At the worst, your work-unit will be distributed to someone else after the cut-off date.

To do this, stop the folding client/s

# /etc/rc.d/foldingathome1 stop
# /etc/rc.d/foldingathome2 stop

open up your Template:Filename file/s and change

su $FAH_USER -c "/opt/fah/FAH504-Linux.exe -verbosity 9 > /opt/fah/$FAH_USER/myfah.log" &


su $FAH_USER -c "/opt/fah/FAH504-Linux.exe -oneunit -verbosity 9 > /opt/fah/$FAH_USER/myfah.log" &

This will force the FAH client to only finish its current work-unit and upload it without downloading a new one. The problem arises in that if you reboot (or restart the init-scripts) after it is finished and sent back the work-unit, it will download a new one to finish and send back. You will just have to monitor the status of the work-unit before you restart, and if it is at 100% and the end of Template:Filename says the work-unit has been returned, you can remove that script from the DAEMONS= line in Template:Filename.

If you know how, you can probably find a way of stopping it from doing this, maybe with a check in the init-script which stops it running when the work-unit file is no longer in the Template:Filename directory.

If you are currently on i686 arch, you will also need to migrate to X86_64 arc, and it would be a good idea to read the Arch64_FAQ


Cannot find ./mpiexec

If you are using the $FAH_USER variable, you will find on starting the smp client that it cannot find Template:Filename, this is because it is in the Template:Filename directory and not your local one. Copy it to Template:Filename and it should run fine.

SMP client not doing any work / stalling ( NNODES=4 )

( This is adapted from the folding@home SMP FAQ )

If you run

# /etc/rc.d/foldingathome-smp start

from the console, you will get some output. If this output stalls with a


line and top/htop shows the smp-client running but with no CPU usage, you will need to check your local network settings. Check that your Template:Filename file is set up with linked to the hostname you set up in Template:Filename.

Work Unit progress sitting at 100%

If your Work Unit progress is sitting at 100%, there is usually a delay in uploading. If your client is running non-backgrounded, there will usually be a prompt to press 'c' to upload the data to the server. However, if you run your client backgrounded, you will want to enable automatic uploading of work data. This can be done by editing Template:Filename in your Folding@Home directory (usually Template:Filename for i686 or Template:Filename for x86_64) and changing the settings line 'asknet=yes' to 'asknet=no'. This will allow Folding@Home to upload data automatically, rather than waiting for user input to upload.

Monitoring Work-Unit Progress

There are several ways of monitoring the progress of your FAH client/s, both on the command line and by GUI.

In AUR there is silent blades fahmon, which provides a GUI with the ability to watch multiple clients and get info on the work-unit itself. Fahmon has a dedicated site at http://www.fahmon.net/

On the CLI, you can add a command to your .bashrc , .zshrc or .whateverrc :

fahstat() {
	echo `date`
	cat /opt/fah/FAH_USER/unitinfo.txt   #(replacing FAH_USER first)

Or for multiple clients :

fahstat() {
        echo `date`
        echo "Core 1:";cat /opt/fah/FAH_USER/unitinfo.txt      #(replace FAH_USER first)
        echo "Core 2:";cat /opt/fah2/FAH_USER/unitinfo.txt     #(replace FAH_USER first)

Also, replacing cat with tail -n1 will give just the percentage of work unit complete.

External Resources