From ArchWiki
Revision as of 18:15, 28 August 2007 by AlexW (talk | contribs) (New page: Category:Daemons and system services = What is Folding@Home = From the [
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

What is Folding@Home

From the AUR package page "Folding@Home is a distributed computing project which studies protein folding, misfolding, aggregation, and related diseases."

Installing Folding@Home

Folding@Home is no longer in the community repository due to licensing issues. However, it is still possible to build it from AUR. If you are familiar with PKGBUILDS and AUR then build it and skip to configuration.

Automatic Install

If you are using Aurbuild, it's as simple as:

aurbuild -s foldingathome

If you are using yaourt , it's as simple as:

yaourt -S --aur foldingathome

Manual Install

To install manually, first download everything under the files section of the Folding@Home AUR page to a folder. Open a console and cd to the directory you downloaded to. Now it's just a matter of running


and if there are no errors you will be left with a package called foldingathome-version-number.pkg.tar.gz.


pacman -U foldingathome-version-number.pkg.tar.gz

being sure to replace version-number first ;)

If all went well, Folding@Home should now be installed.


Firstly, you will want to open your /etc/conf.d/foldingathome config file, with your editor of choice.

nano /etc/conf.d/foldingathome

The config is self explanatory, if you wish to have Folding@Home run as a user other than root (handy on single user systems, probably more secure on multi-user systems), or in a different group, then change these values.

Now run the Folding@Home process for the first time with

sudo /etc/rc.d/foldingathome start

give it a few seconds and then run

/etc/rc.d/foldingathome stop

You will find under your /opt/fah/ directiory, either new files or a new folder, if you set the user variable in /etc/conf.d/foldingathome. You will find a file called client.cfg, either in the /opt/fah dir or the /opt/fah/username folder.

nano /opt/fah/client.cfg


nano /opt/fah/username/client.cfg

The most important settings here are:

  • username, user-name associated to the work-units you return.
  • team, the team number you wish to contribute points to (earned for work units returned), you will of course want to fill in 45032, the arch-linux team number;)
  • bigpackets, defines whether you will accept memory intesive work loads. If you have no problem with Folding@Home using up your RAM, then set this to yes (atleast 512MB of RAM recommended).
  • machineid, covered in the Multi-Core section.

Assuming it all ran correctly, you'll want to put it in /etc/rc.conf to run on startup, so

nano /etc/rc.conf

and add @foldingathome to your DAEMONS variable (the @ causes it to start in the background, so as not to slow startup, see Daemons).

and then run

sudo /etc/rc.d/foldingathome start

again, to start Folding@Home up.

Folding@Home is now installed and running!

Handy commands


fahstat() {
	echo `date`
	cat /opt/fah/username/unitinfo.txt   ***replacing username***

to your .bashrc , .zshrc or .whateverrc, for a summary of what Folding@Home is up to.

Also, replacing the cat command with tail -n1

fahstat() {
	echo `date`
	tail -n1 /opt/fah/username/unitinfo.txt   #(replacing username first)

will give you just the percentage of work-unit complete.

Multi-Core Cpu's and Folding@Home

A Quick Note On Hyperthreading

If you have a single-core hyperthreading CPU, you may be tempted to follow the multi-core instructions. It's highly recommened you don't do this as the Folding@Home team prefer fewer results quickly, than more results slowly. There's also a time-limit on work-units, so if it runs slower, your work-units may not be returned in time, and so distributed to another user. If you have one core, run one folding process.

Multiple Folding@Home Installs

Setting up Multiple Folding@Home installs

It's very simple to set up an extra install, although after each (rare) upgrade of the Folding@Home package, you will have to perform some maintenance, unless you wish to build separate packages with custom PKGBUILDS / scripts (beyond the scope of this tutorial). This method should also scale to however many cores/processors you have.

First, stop Folding@Home if it's running

sudo /etc/rc.d/foldingathome stop


sudo cp -r /opt/fah /opt/fah2

If you wish to call it something different, then by all means do. This tutorial will assume you're using /opt/fah2 for your second install and that you have the username directory.


rm -rf /opt/fah2/username/work  /opt/fah2/username/queue.dat

if they exist, this way you won't be working on the work-unit that the original thread was working on twice.

You now have to open up the config for the new process

nano /opt/fah2/client.cfg

and change the machine ID to a different number to that of /opt/fah/client.cfg.

If you're using the bigpackets option in client.cfg, you should only have it set to yes for one of your Folding@Home processes as it can overwhelm your system otherwise.

Editing Init Scripts

Now comes the fun part. A second init script needs to be created and a little editing needs to be done, but this way you can turn each process on and off as wanted and it's simpler than one script managing both.

First, some initial editing has to be done to the current script and saved under another name

nano /etc/rc.d/foldingathome


. /etc/rc.conf
. /etc/rc.d/functions
. /etc/conf.d/foldingathome



This is to cut down on later maintance.

Next, change

PID=`pidof -o %PPID /opt/fah/FAH504-Linux.exe`


PID=`pgrep -f /opt/fah/FAH${FAH_VER}-Linux.exe -u $FAH_USER`

The reason for this is that pidof detects the first and second Folding@Home process as the same and so stopping one init script will kill both processes. On the other hand, pgrep will find the proccess associated filename/location. The "-u $FAH_USER" part is tacked on as a precaution, in case you are doing something strange with Folding@Home threads and users. You'll also notice the FAH_VER has slipped in there.

There should be two more instances of /opt/fah/FAH504-Linux.exe, change them to


You can also change the

stat_busy "Starting Folding@Home"

stat_busy "Stopping Folding@Home"

lines to have some extra description such as "on Core 1" if you need to.

Now save the file as /etc/rc.d/foldingathome1 , this is to prevent it being over-written by a package upgrade.

Make a copy of the script

cp /etc/rc.d/foldingathome1 /etc/rc.d/foldingathome2

Now you have to find and replace instances of /opt/fah with /opt/fah2 in this script, double checking you aren't getting any false positives (there shouldn't be any, but scripts change). Make sure you get the one in the PID variable, otherwise the whole pgrep bit was a bit pointless ;)

Now, save this script and open up /etc/rc.conf and add @foldingathome1 and @foldingathome2 to the DEAMONS variable. Start up the two processes

sudo /etc/rc.d/foldingathome1 start
sudo /etc/rc.d/foldingathome2 start

and if all goes well, you've got 2 Folding@Home processes running!


When upgrading the Folding@Home package, /opt/fah/FAH504-Linux.exe will be replaced with an executable with a new version number. This needs to be copied into your /opt/fah2 directory and the old executable deleted.

You then just have to change the FAH_VER variable in both scripts to reflect the new version number.

Handy Multi-Core command

As with the handy command for single core .whateverrc, this

fahstat() {
        echo `date`
        echo "Core 1:";cat /opt/fah/username/unitinfo.txt
        echo "Core 2:";cat /opt/fah2/username/unitinfo.txt

may be useful.

Folding@Home SMP Support

Folding@Home SMP Client on AUR

Folding@Home SMP Client FAQ

External Links

Folding@Home Site

Folding@Home FAQ

Folding@Home Configuration FAQ