Difference between revisions of "Fsck"

From ArchWiki
Jump to: navigation, search
(Check Now)
(Check Now)
Line 15: Line 15:
== Check Now ==
== Check Now ==
{{out of date|See {{ic|man shutdown}} (depreciated)
{{out of date|See {{ic|man shutdown}} (depreciated)}}
To check all the relevant partitions immediately, run:
To check all the relevant partitions immediately, run:

Revision as of 06:43, 21 December 2012

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary end

fsck stands for "file system check" and it is used to check and optionally repair one or more Linux file systems. Normally, the fsck program will try to handle filesystems on different physical disk drives in parallel to reduce the total amount of time needed to check all of the filesystems (see: man fsck).

The Arch Linux boot process conveniently takes care of the fsck procedure for you and will check all relevant partitions on your drive(s) automatically on every boot. Hence, there is usually no need to resort to the command-line unless necessary.

Check Now

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: See man shutdown (depreciated) (Discuss in Talk:Fsck#)

To check all the relevant partitions immediately, run:

# shutdown -Fr now

The command shutdown brings down the system in a secure manner, -F forces fsck to be safely invoked on a reboot, -r causes the system to reboot after shutdown, and now shuts down the system immediately.

Check Later

Another method would be to create a forcefsck file on the partition you wish to check later. For example, for the root partition it would be:

# touch /forcefsck

When you're ready, reboot and fsck will do the rest. And don't worry, this file will be removed automatically when the process is finished.

If you want to cancel a running fsck-check during boottime, (like in Ubuntu with ESC) you have to create a file called e2fsck.conf in /etc/, and add the following lines:

 allow_cancellation = true

Now you should be able to cancel a running fsck-ckeck with control + C.

Other fsck tricks

A list of all available options can be found by running:

# fsck -h

To automatically repair damaged portions, run:

Warning: This will not ask if you want to repair it, as the answer is Yes when you run it.
# fsck -a

To make no changes to the filesystem (opposite of the above, meaning the answer is No when asked about fixing errors), run:

# fsck -n

Changing check frequency

By default, fsck checks a filesystem every 30 boots (counted individually for each partition). To change the frequency of checking, run:

# tune2fs -c 20 /dev/sda1

In this example, 20 is the number of boots between two checks.

Note that 1 would make it scan at every boot, while 0 would stop scanning altogether.

Tip: If you wish to see the frequency number and the current mount count for a specific partition, use:
# dumpe2fs -h /dev/sda1 | grep -i 'mount count'

fstab options

fstab is a system configuration file and is used to tell the Linux kernel which partitions (file systems) to mount and where on the file system tree.

A typical /etc/fstab entry may look like this:

/dev/sda1   /         ext4      defaults       0  1
/dev/sda2   /other    ext4      defaults       0  2
/dev/sda3   /win      ntfs-3g   defaults       0  0

The 6th column (in bold) is the fsck option.

  • 0 = Do not check.
  • 1 = First file system (partition) to check; / (root partition) should be set to 1.
  • 2 = All other filesystems to be checked.


Can't run fsck on a separate /usr partition

  1. Make sure you have the required hooks in /etc/mkinitcpio.conf and that you remembered to re-generate your initramfs image after editing this file.
  2. Make sure that the bootloader has ro on the "APPEND" line in /boot/syslinux/syslinux.cfg (for Syslinux). GRUB doesn't need one; it is added automatically when you generate a .cfg. For an explanation as to why you need "ro", see this post.
  3. Check your fstab! Only the root partition needs "1" at the end, everything else should have either "2" or "0". Carefully inspect it for other typos, as well.