Fujitsu Lifebook S6520
The LifeBook S6520’s compact size, light weight, and travel-friendly features make it my favorite laptop. The notebook features a 14.1-inch LED screen with a 1280 x 800 resolution, while the dimensions and weight of which are as a 13.3-inch model. The default Operation System is Windows® Vista™, however Arch Linux runs well on it, because "Fujitsu offer best-in-class support for Linux".
- 1 Hardware specifications
- 2 Running Arch on the S6520
- 2.1 Intel Core 2 Duo
- 2.2 The TFT panel and graphics card
- 2.3 Setting up X.Org
- 2.4 Networking support
- 2.5 Sound support
- 2.6 Modem
- 2.7 FireWire
- 2.8 AuthenTec AES2501 fingerprint reader
- 2.9 ACPI
- 2.10 Tactile strip
- 3 Device infomation
- 4 Reference
- BIOS: Phoenix (07/09/08)
- Intel Core 2 Duo T8600 / T9400
- SamSung 2 GB DDR3-1066 SDRAM
- 14.1" 1280x800 WXGA (FUJ5112)
- WDC WD2500BEVS-16UST0 ATA Device (250G SATA hard disk)
- MATSHITA DVD-RAM UJ862BJ ATA Device (DVD-RW & CD-RW)
- FUJITSU FJNB1E6 Mainboard (Intel GM45) with Intel GMA 4500 MHD onboard GPU
- Intel® WiFi Link 5300 AGN (IPW5300) with wireless hardware switch
- Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
- Realtek ALC269 - High Definition Audio Controller
- AuthenTec Inc. AES2501A fingerprint reader
- Logitech Webcam
- Agere Systems HDA modem
- built-in Bluetooth RFCOMM from Toshiba, and SMSC Fast Infrared Device
- 5 in 1 cardreader (supporting MMC/SD, MS/xD, MemoryStick, etc.)
- 3 x USB 2.0, 1x FireWire 400 4-pin connector, VGA and S-Video ports
Running Arch on the S6520
In order to get the most out of the S6520, you'd better choose a Linux distribution that has a latest kernel, the version of which at least 2.6.27, otherwise your wireless card (and maybe the sound card) won't work. Arch Linux is the very distribution that always has a latest kernel.
Intel Core 2 Duo
Automatic frequency throttling and voltage adjustment can be enabled by loading the acpi_cpufreq module (this one is to be preferred over the Intel Speedstep ones; those will be deprecated soon). Install cpufreqd, which will pull in cpufreq-utils along with it. Set up both utilities, and add cpufreqd as a daemon to your DAEMONS=() array (in /etc/rc.conf, that is).
The TFT panel and graphics card
The laptop's TFT panel features a resolution of 1280x800, which however is not present on the i915 chipset's BIOS and one has to use KMS to support this resolution mode.
The video card (Intel GMA 4500MHD) has been supported by xf86-video-intel since the version of 2.6.0.
# pacman -S xf86-video-intel hal
Setting up X.Org
Gigabit Ethernet Controller
No setup required for the wired LAN Controller (Marvell Yukon 88E8055), it just needs the sky2 kernel module.
Wireless LAN support
It needs the iwlagn module, which has been supported since kernel 2.6.27. And a firmware also need to be installed: iwlwifi-5000-ucode.
# pacman -S iwlwifi-5000-ucode
The laptop's Bluetooth HCI is supported by BlueZ, the Linux Bluetooth Stack. The device is detected automatically and using BlueZ's daemons I even managed to get a TCP/IP-over-Bluetooth (PAN) network going. See Bluetooth.
Infrared communication support
Under Linux the notebook's infrared port is viewed as /dev/ttyS3. Under Arch Linux you just need to install the irda-utils package and configure /etc/conf.d/irda as follows:
# Parameters to be passed to irattach # DEVICE=/dev/ttyS3 #DONGLE=actisys+ DISCOVERY=yes
All you have to do next is start the IrDA subsystem:
# /etc/rc.d/irda start
General networking tips
I use a handy little utility called iflugpd to manage the network interfaces. In short, ifplugd monitors the network interfaces for connect/disconnect events and runs predefined actions (usually a dhcp client). You can edit /etc/ifplugd/ifplugd.conf:
NET_IFS="eth0 wlan0" ARGS="-fwI -u0 -d8"
Apart from that, I also use netcfg to manage the different wireless networks and support WPA/WPA2/IEEE802.1x etc. See Network Profiles.
The on-board Intel High-Definition Audio chipset (Realtek ALC269) is supported by the snd_hda_intel kernel module. The first time I tried using the card the sound output was really horrible, because the mixer didn't function properly. And then I found my headphone play together with the speakers. Luckily both symptoms are fixed by adding the following lines to /etc/modprobe.d/modprobe.conf or /etc/modprobe.d/sound.conf:
alias snd-card-0 snd-hda-intel alias sound-slot-0 snd-hda-intel options snd-card-0 index=0 position_fix=1 options snd-hda-intel index=0 position_fix=1
The modem is supported by the sound card module. The only thing needed to make it work is slmodemd, a daemon designed for use with SmartLink modems. This daemon, when compiled accordingly, supports the ALSA modem drivers. If your slmodemd is ALSA-capable, then you only need to run:
slmodemd --alsa modem:0
and then point your favourite dialer program (e.g. ppp, wvdial) to /dev/ttySL0. You can also create a symlink from /dev/ttySL0 to /dev/modem, something which most dialers use out-of-the-box.
Then edit /etc/conf.d/slmodem-alsa:
# Parameters to be passed to slmodemd # SLMODEM_ARGS="--country=GR --alsa modem:0"
Just need the ohci1394 kernel module.
AuthenTec AES2501 fingerprint reader
As duly pointed out on the forums, fingerprint readers are more a threat to your privacy than a safeguard. Your fingerprints (unless you are paranoid and type with gloves on) are likely to be all over your keyboard, rendering the 'security' purpose of this device useless. Keep this in mind if you intend to use the reader as a replacement for your password; fingerprints can be duplicated easily with basic stuff (graphite ea.).
There is a utility called fprint available, together with a libfprint library it depends on. Both are packaged for Arch Linux.
# pacman -S fprint
The fprint program is still called fprint_demo for the moment, but it works :-).
Integration with the login manager seems possible - for that you'll need amongst others the pam_fprint module.
Afer installing the package, run
and follow the instructions to scan the finger you want to use for authentication. The next step is to configure PAM. First edit /etc/pam.d/login, and make the first lines look like this:
#% PAM-1.0 auth required pam_securetty.so auth requisite pam_nologin.so auth sufficient pam_fprint.so auth required pam_unix.so nullok auth required pam_tally.so onerr=succeed file=/var/log/faillog
This will make PAM accept a successful fingerprint scan as a valid login token, if the scan fails, it will fall back to a password. From this moment on, you'll be able to log on with a scan on a tty - enter your username, press Enter, and scan the finger you told pam_fprint_enroll to use as default. Voilà :-).
On the forum you can also find a topic that covers setting up your fingerprint reader with PAM and SLiM, but this is with the aes2501 kernelspace driver.
Suspension and hibernation
Nowadays, all you should need is the following:
sudo pacman -S pm-utils
That will install the pm-utils package which contains the programs pm-suspend, pm-hibernate, etc. To suspend to RAM, just do the following:
...and to hibernate...
Pretty straight-forward! There is also a "hybrid", called pm-suspend-hybrid. What this does is that it does everything it needs to hibernate and then suspends the computer instead of shutting it down, as it normally would when hibernating! So if you do not run out of power during this suspended state, you can start the computer up again as if it was a normal supension—if you do run out of power, it would just act like a normal hibernation.
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 14) 18:00.0 Network controller: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection 38:03.0 CardBus bridge: O2 Micro, Inc. OZ711SP1 Memory CardBus Controller (rev 01) 38:03.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 38:03.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 38:03.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c052 Logitech, Inc. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 003: ID 0c24:0021 Taiyo Yuden Bus 006 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 046d:09b2 Logitech, Inc. Fujitsu Webcam Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub