Fujitsu Siemens Lifebook P7010

From ArchWiki
Revision as of 22:05, 1 September 2005 by Nightfrost (Talk | contribs)

Jump to: navigation, search


Introduction

This is my first attempt to create/edit a wiki page. I will work on this page as much as time allows, but be prepared to have it little more than a stub at times (like now)...

Summary

The Fujitsu-Siemens P7010(D) is a neat little laptop with a 10" widescreen. It weighs little more than a kilo, has a relatively long battery life and sports many things that low-weight laptops normally lack.

System Specifications

Fujitsu Siemens LifeBook P7010 - Pentium M 753 1.2 GHz - 10.6" TFT

  • 26.1 cm x 19.9 cm x 3.5 cm
  • 1.3 kg
  • Pentium M 753 1.2 GHz ULV, 2MB L2-cache
  • 512MB DDR SDRAM 333MHz PC2700 (maximum: 1024MB)
  • SD-card reader (ricoh)
  • CF reader
  • PCMCIA
  • 80GB 5400 rpm Harddrive
  • 10.6" TFT active matrix WXGA (1280 x 768)
  • Intel 855GME
  • Ethernet
  • Intel PRO/Wireless 2200BG
  • Modem
  • 2 USB ports, 1 firewire
  • Battery time: 7.5 hours
  • Port for external screen
  • TV-out

Output of lshwd

00:00.0 Host bridge: Intel Corp.: Unknown device 3580 (intel-agp)
00:00.1 System peripheral: Intel Corp.: Unknown device 3584 (unknown)
00:00.3 System peripheral: Intel Corp.: Unknown device 3585 (unknown)
00:02.0 VGA compatible controller: Intel Corp.: Unknown device 3582 (vesa)
00:02.1 Display controller: Intel Corp.: Unknown device 3582 (vesa)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (uhci_hcd)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (uhci_hcd)
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (ehci-hcd)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (hw_random)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24cc (unknown)
00:1f.1 IDE interface: Intel Corp.: Unknown device 24ca (piix)
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (i2c-i801)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (snd-intel8x0)
00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem (slamr)
01:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (yenta_socket)
01:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (yenta_socket)
01:0a.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (ohci1394)
01:0a.3 System peripheral: Ricoh Co Ltd: Unknown device 0576 (unknown)
01:0a.4 System peripheral: Ricoh Co Ltd: Unknown device 0592 (unknown)
01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (8139too)
01:0d.0 Network controller: Intel Corp.: Unknown device 4220 (ipw2200)
003:003 USB Mass Storage: FireWire/USB2.0 Combo (usb-storage)
003:001 USB Hub:  (hub)
002:001 USB Hub:  (hub)
001:002 USB Wireless: USAWireless Bluetooth Device (hci_usb)
001:001 USB Hub:  (hub)
---:--- Mouse: Generic PS/2 Wheel Mouse [/dev/psaux] (msintellips/2)


What works/What doesn't

Pretty much everything works on this laptop except the TV-out and the SD-card reader. The screen needs a little tweaking to get working. The preferred resolution (1280x768) isn't part of the VBIOS, and consequently the VBIOS needs to be patched with Alain Poirier's software 855resolution (to be found in the AUR)


Video

Audio

Important Config files

Kernel Config

Throughout most of linux days I've been using morph-sources, but recently I've been starting to use archck. Here's a config file for the kernel that can be used as a base. There are doubtless changes you should do, but it's always nice to have something to start off from.

[post .config here]

xorg.conf

cpufreqd.conf

rc.conf (modules array)