Difference between revisions of "GRUB/EFI examples"

From ArchWiki
Jump to: navigation, search
m (Z68 Family: Fixed EFI shell path to the standard one)
(Z68 Family: add U47 family and some options)
(One intermediate revision by one other user not shown)
Line 25: Line 25:
  
 
== Asus ==
 
== Asus ==
=== Z68 Family ===
+
=== Z68 Family and U47 Family===
 
  # cp /boot/efi/EFI/arch_grub/grubx64.efi /boot/efi/shellx64.efi
 
  # cp /boot/efi/EFI/arch_grub/grubx64.efi /boot/efi/shellx64.efi
  
After this launch the UEFI Shell from the UEFI setup/menu (in ASUS UEFI BIOS, switch to advanced mode, press Exit in the top right corner and choose "Launch EFI shell from filesystem device"). The GRUB2 menu will show up and you can boot into your system. Afterwards you can use efibootmgr to setup a menu entry. If your motherboard has no such option (or even if it does), you can use UEFI shell ([[Unified_Extensible_Firmware_Interface#UEFI_Shell]]) to create a UEFI boot option for the Arch partition temporarily.
+
After this launch the UEFI Shell from the UEFI setup/menu (in ASUS UEFI BIOS, switch to advanced mode, press Exit in the top right corner and choose "Launch EFI shell from filesystem device"). The GRUB2 menu will show up and you can boot into your system. Afterwards you can use efibootmgr to setup a menu entry, for example if you have the uefi partition in /dev/sda1: (read [[Unified_Extensible_Firmware_Interface]])
 +
 
 +
  efibootmgr -c -g -d /dev/sda -p 1 -w -L "Archlinux Grub" -l '\EFI\arch_grub\grubx64.efi'
 +
 
 +
If your motherboard has no such option (or even if it does), you can use UEFI shell ([[Unified_Extensible_Firmware_Interface#UEFI_Shell]]) to create a UEFI boot option for the Arch partition temporarily.
  
 
Once you boot into the EFI shell, add a UEFI boot menu entry:
 
Once you boot into the EFI shell, add a UEFI boot menu entry:
Line 56: Line 60:
 
* Navigate to the 'Boot' section and adjust the boot order to your liking with the "Arch Linux (grub manually added)" being the one on your SSD.
 
* Navigate to the 'Boot' section and adjust the boot order to your liking with the "Arch Linux (grub manually added)" being the one on your SSD.
 
* Boot to this entry and enjoy your system.
 
* Boot to this entry and enjoy your system.
 +
 +
== Intel ==
 +
=== S5400 Family ===
 +
Please note that this board operates on the Intel EFI v1.10 specification, and is i386 only. The normal procedure for UEFI installation can be followed, with the exception of the following changes.
 +
* Instead of using the {{ic|grub-efi-x86_64}} package, {{ic|grub-efi-i386}} has to be used
 +
* The {{ic|bcfg}} command is not available for pre-UEFI firmware. A {{ic|startup.nsh}} file can be used on the root of the EFI partition containing the path to the bootloader. For example:
 +
{{ic|fs0:\EFI\arch_grub\boot.efi}}
 +
* The {{ic|grub.cfg}} file has to be placed in the same directory as the grub EFI file, otherwise grub will enter the interactive shell

Revision as of 18:01, 20 February 2013

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary end

Apple Mac EFI systems

Generic Macs

Use bless command from within Mac OS X to set grubx64.efi as the default boot option. You can also boot from the Mac OS X install disc and launch a Terminal there if you only have Linux installed. In the Terminal, create a directory and mount the EFI System Partition:

# cd /Volumes
# mkdir efi
# mount -t msdos /dev/disk0s1 /Volumes/efi

Then run bless on grub.efi and on the EFI partition to set them as the default boot options.

# bless --folder=/Volumes/efi --file=/Volumes/efi/efi/arch_grub/grubx64.efi --setBoot
# bless --mount=/Volumes/efi --file=/Volumes/efi/efi/arch_grub/grubx64.efi --setBoot

More info at https://help.ubuntu.com/community/UEFIBooting#Apple_Mac_EFI_systems_.28both_EFI_architecture.29.

Note: TODO: GRUB upstream Bazaar mactel branch http://bzr.savannah.gnu.org/lh/grub/branches/mactel/changes. No further update from grub developers.
Note: TODO: Experimental "bless" utility for Linux by Fedora developers - mactel-bootAUR. Requires more testing.

Asus

Z68 Family and U47 Family

# cp /boot/efi/EFI/arch_grub/grubx64.efi /boot/efi/shellx64.efi

After this launch the UEFI Shell from the UEFI setup/menu (in ASUS UEFI BIOS, switch to advanced mode, press Exit in the top right corner and choose "Launch EFI shell from filesystem device"). The GRUB2 menu will show up and you can boot into your system. Afterwards you can use efibootmgr to setup a menu entry, for example if you have the uefi partition in /dev/sda1: (read Unified_Extensible_Firmware_Interface)

efibootmgr -c -g -d /dev/sda -p 1 -w -L "Archlinux Grub" -l '\EFI\arch_grub\grubx64.efi'

If your motherboard has no such option (or even if it does), you can use UEFI shell (Unified_Extensible_Firmware_Interface#UEFI_Shell) to create a UEFI boot option for the Arch partition temporarily.

Once you boot into the EFI shell, add a UEFI boot menu entry:

Shell> bcfg boot add 0 fs1:\EFI\arch_grub\grubx64.efi "Arch Linux (GRUB2)"

where fs1 is the mapping corresponding to the UEFI System Partition and \EFI\arch_grub\grubx64.efi is the the from the --bootloader-id from the grub-install command above.

This will temporarily add a UEFI boot option for the next boot to get into Arch. Once in Arch, modprobe efivars and confirm that efibootmgr creates no errors (no errors meaning you successfully booted in UEFI mode). Then Grub2#Install_to_UEFI_SYSTEM_PARTITION can be performed again and should successfully permanently add a boot entry in the UEFI menu.

P8Z77 Family

  • Boot to live media and chroot into the target system.

FROM WITHIN THE CHROOT

# mount -t vfat /dev/sdXY /boot/efi
# grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=arch --recheck
# grub-mkconfig -o /boot/grub/grub.cfg
# mkdir /boot/efi/boot && cd /boot/efi
# wget https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2/ShellBinPkg/UefiShell/X64/Shell.efi
# cp Shell.efi shellx64.efi && cp Shell.efi /boot/efi/boot
# umount /boot/efi
  • Reboot and enter the BIOS (the Delete key will do this).
  • Using the arrow keys, move to the 'exit' menu and drop down to the EFI shell you just downloaded and copied to three places.
  • You will need to add an entry to your boot menu manually. Below is an example, see the UEFI#Launching UEFI Shell article for more. Below is an example added a new entry to a menu with 3 current entries.

FROM WITHIN THE EFI SHELL

Shell> bcfg boot dump -v
Shell> bcfg boot add 3 fs0:\EFI\arch\grubx64.efi "Arch Linux (grub manually added)"
Shell> exit
  • Reboot the machine and enter the BIOS.
  • Navigate to the 'Boot' section and adjust the boot order to your liking with the "Arch Linux (grub manually added)" being the one on your SSD.
  • Boot to this entry and enjoy your system.

Intel

S5400 Family

Please note that this board operates on the Intel EFI v1.10 specification, and is i386 only. The normal procedure for UEFI installation can be followed, with the exception of the following changes.

  • Instead of using the grub-efi-x86_64 package, grub-efi-i386 has to be used
  • The bcfg command is not available for pre-UEFI firmware. A startup.nsh file can be used on the root of the EFI partition containing the path to the bootloader. For example:

fs0:\EFI\arch_grub\boot.efi

  • The grub.cfg file has to be placed in the same directory as the grub EFI file, otherwise grub will enter the interactive shell