GRUB/EFI examples

From ArchWiki
< GRUB
Revision as of 22:47, 30 December 2012 by Grawity (Talk | contribs) (Z68 Family: Fixed EFI shell path to the standard one)

Jump to: navigation, search

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary end

Apple Mac EFI systems

Generic Macs

Use bless command from within Mac OS X to set grubx64.efi as the default boot option. You can also boot from the Mac OS X install disc and launch a Terminal there if you only have Linux installed. In the Terminal, create a directory and mount the EFI System Partition:

# cd /Volumes
# mkdir efi
# mount -t msdos /dev/disk0s1 /Volumes/efi

Then run bless on grub.efi and on the EFI partition to set them as the default boot options.

# bless --folder=/Volumes/efi --file=/Volumes/efi/efi/arch_grub/grubx64.efi --setBoot
# bless --mount=/Volumes/efi --file=/Volumes/efi/efi/arch_grub/grubx64.efi --setBoot

More info at https://help.ubuntu.com/community/UEFIBooting#Apple_Mac_EFI_systems_.28both_EFI_architecture.29.

Note: TODO: GRUB upstream Bazaar mactel branch http://bzr.savannah.gnu.org/lh/grub/branches/mactel/changes. No further update from grub developers.
Note: TODO: Experimental "bless" utility for Linux by Fedora developers - mactel-bootAUR. Requires more testing.

Asus

Z68 Family

# cp /boot/efi/EFI/arch_grub/grubx64.efi /boot/efi/shellx64.efi

After this launch the UEFI Shell from the UEFI setup/menu (in ASUS UEFI BIOS, switch to advanced mode, press Exit in the top right corner and choose "Launch EFI shell from filesystem device"). The GRUB2 menu will show up and you can boot into your system. Afterwards you can use efibootmgr to setup a menu entry. If your motherboard has no such option (or even if it does), you can use UEFI shell (Unified_Extensible_Firmware_Interface#UEFI_Shell) to create a UEFI boot option for the Arch partition temporarily.

Once you boot into the EFI shell, add a UEFI boot menu entry:

Shell> bcfg boot add 0 fs1:\EFI\arch_grub\grubx64.efi "Arch Linux (GRUB2)"

where fs1 is the mapping corresponding to the UEFI System Partition and \EFI\arch_grub\grubx64.efi is the the from the --bootloader-id from the grub-install command above.

This will temporarily add a UEFI boot option for the next boot to get into Arch. Once in Arch, modprobe efivars and confirm that efibootmgr creates no errors (no errors meaning you successfully booted in UEFI mode). Then Grub2#Install_to_UEFI_SYSTEM_PARTITION can be performed again and should successfully permanently add a boot entry in the UEFI menu.

P8Z77 Family

  • Boot to live media and chroot into the target system.

FROM WITHIN THE CHROOT

# mount -t vfat /dev/sdXY /boot/efi
# grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=arch --recheck
# grub-mkconfig -o /boot/grub/grub.cfg
# mkdir /boot/efi/boot && cd /boot/efi
# wget https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2/ShellBinPkg/UefiShell/X64/Shell.efi
# cp Shell.efi shellx64.efi && cp Shell.efi /boot/efi/boot
# umount /boot/efi
  • Reboot and enter the BIOS (the Delete key will do this).
  • Using the arrow keys, move to the 'exit' menu and drop down to the EFI shell you just downloaded and copied to three places.
  • You will need to add an entry to your boot menu manually. Below is an example, see the UEFI#Launching UEFI Shell article for more. Below is an example added a new entry to a menu with 3 current entries.

FROM WITHIN THE EFI SHELL

Shell> bcfg boot dump -v
Shell> bcfg boot add 3 fs0:\EFI\arch\grubx64.efi "Arch Linux (grub manually added)"
Shell> exit
  • Reboot the machine and enter the BIOS.
  • Navigate to the 'Boot' section and adjust the boot order to your liking with the "Arch Linux (grub manually added)" being the one on your SSD.
  • Boot to this entry and enjoy your system.