General troubleshooting

From ArchWiki
Revision as of 15:39, 22 August 2016 by Alad (talk | contribs) (Debug output: fix link)
Jump to: navigation, search

This article explains some methods for general troubleshooting. For application specific issues, please reference the particular wiki page for that program.

General procedures

Attention to detail

In order to resolve an issue that you are having, it is absolutely crucial to have a firm basic understanding of how that specific subsystem functions. How does it work, and what does it need to run without error? If you cannot comfortably answer these question then you would best review the Archwiki article for the subsystem that you are having trouble with. Once you feel like you've understood it, it will be easier for you to pinpoint the cause of the problem.


The following gives a number of questions for you whenever dealing with a malfunctioning system. Under each question there are notes explaining how you should be answering each question, followed by some light examples on how to easily gather data output and what tools can be used to review logs and the journal.

  1. What is the issue(s)?
    Be as precise as possible. This will help you not get confused and/or side-tracked when looking up specific information.
  2. Are there error messages? (if any)
    Copy and paste full outputs that contain error messages related to your issue into a separate file, such as $HOME/issue.log. For example, to forward the output of the following mkinitcpio command to $HOME/issue.log:
    $ mkinitcpio -p linux >> $HOME/issue.log
  3. Can you reproduce the issue?
    If so, give exact step-by-step instructions/commands needed to do so.
  4. When did you first encounter these issues and what was changed between then and when the system was operating without error?
    If it occurred right after an update then, list all packages that were updated. Include version numbers, also, paste the entire update from pacman.log (/var/log/pacman.log). Also take note of the statuses of any service(s) needed to support the malfunctioning application(s) using systemd's systemctl tools. For example, to forward the output of the following systemd command to $HOME/issue.log:
    $ systemctl status dhcpcd@eth0.service >> $HOME/issue.log
    Note: Using >> will ensure any previous text in $HOME/issue.log will not be overwritten.

Be more specific

When attempting to resolve an issue, never approach it as:

Application X does not work.

Instead, look at it in its entirety:

Application X produces Y error(s) when performing Z tasks under conditions A and B.

Additional support

With all the information in front of you you should have a good idea as to what is going on with the system and you can now start working on a proper fix.

If you require any additional support, it can be found on the forums or IRC at #archlinux See IRC channels for other options.

When asking for support post the complete output/logs, not just what you think are the significant sections. Sources of information include:

  • Full output of any command involved - don't just select what you think is relevant.
  • Output from systemd's journalctl. For more extensive output, use the systemd.log_level=debug boot parameter.
  • Log files (have a look in /var/log)
  • Relevant configuration files
  • Drivers involved
  • Versions of packages involved
  • Kernel: dmesg. For a boot problem, at least the last 10 lines displayed, preferably more
  • Networking: Exact output of commands involved, and any configuration files
  • Xorg: /var/log/Xorg.0.log, and prior logs if you have overwritten the problematic one
  • Pacman: If a recent upgrade broke something, look in /var/log/pacman.log

One of the better ways to post this information is to use an online pastebin. You can install the pbpst or gist package to automatically upload information. For example, to upload the content of your systemd journal from this boot you would do:

# journalctl -xb | pbpst -S

A link will then be output that you can paste to the forum or IRC.

Additionally, before posting your question, you may wish to review how to ask smart questions. See also Code of conduct.

Boot problems

A lot happens during the boot process, so it is a common time for errors to manifest. There are many methods for diagnosing and fixing boot problems, but most involve changing the kernel parameters and rebooting the system. Ensure that you are familiar with how to change your kernel parameters.

If the system does not boot at all, boot from a live image and change root to log into the system and fix the issue.

Console messages

To see error messages which are already displayed, see Getty#Have_boot_messages_stay_on_tty1.


Scrollback allows the user to go back and view text which has scrolled off the screen of a text console. This is made possible by a buffer created between the video adapter and the display device called the scrollback buffer. By default, the key combinations of Shift+PageUp and Shift+PageDown scroll the buffer up and down.

If scrolling up all the way does not show you enough information, you need to expand your scrollback buffer to hold more output. This is done by tweaking the kernel's framebuffer console (fbcon) with the kernel parameter fbcon=scrollback:Nk where N is the desired buffer size is kilobytes. The default size is 32k.

If this does not work, your framebuffer console may not be properly enabled. Check the Framebuffer Console documentation for other parameters e.g. for changing the framebuffer driver.

Debug output

Most kernel messages are hidden during boot. You can see more of these messages by adding different kernel parameters. The simplest ones are:

  • debug enables debug messages for both the kernel and systemd
  • ignore_loglevel forces all kernel messages to be printed

Other parameters you can add that might be useful in certain situations are:

  • earlyprintk=vga,keep prints kernel messages very early in the boot process, in case the kernel would crash before output is shown. You must change vga to efi for EFI systems
  • log_buf_len=16M allocates a larger (16MB) kernel message buffer, to ensure that debug output is not overwritten

There are also a number of separate debug parameters for enabling debugging in specific subsystems e.g. bootmem_debug, sched_debug. Check the kernel parameter documentation for specific information.

Note: If you cannot scroll back far enough to view the desired boot output, you should increase the size of the scrollback buffer.

Recovery shells

Getting an interactive shell at some stage in the boot process can help you pinpoint exactly where and why something is failing. There are several kernel parameters for doing so, but they all launch a normal shell which you can exit to let the kernel resume what it was doing:

  • rescue launches a shell shortly after the root filesystem is remounted read/write
  • emergency launches a shell even earlier, before most filesystems are mounted
  • init=/bin/sh (as a last resort) changes the init program to a root shell. rescue and emergency both rely on systemd, but this should work even if systemd is broken

Another option is systemd's debug-shell which adds a root shell on tty9 (accessible with Ctrl+Alt+F9). It can be enabled by either adding systemd.debug-shell to the kernel parameters, or by enabling debug-shell.service. Take care to disable the service when done to avoid the security risk of leaving a root shell open on every boot.

Blank screen with Intel video

This is most likely due to a problem with kernel mode setting. Try disabling modesetting or changing the video port.

Stuck while loading the kernel

Try disabling ACPI by adding the acpi=off kernel parameter.

Debugging kernel modules

See Kernel modules#Obtaining information.

Debugging hardware

See udev#Debug output.

See also

Package management

See Pacman#Troubleshooting for general topics, and pacman/Package signing#Troubleshooting for issues with PGP keys.


Tango-view-fullscreen.pngThis article or section needs expansion.Tango-view-fullscreen.png

Reason: Write an example how to use it. (Discuss in Talk:General troubleshooting#)

fuser is a command-line utility for identifying processes using resources such as files, filesystems and TCP/UDP ports.

fuser is provided by the psmisc package, which should be already installed as part of the base group.

Session permissions

Note: You must be using systemd as your init system for local sessions to work.[1] It is required for polkit permissions and ACLs for various devices (see /usr/lib/udev/rules.d/70-uaccess.rules and [2])

First, make sure you have a valid local session within X:

$ loginctl show-session $XDG_SESSION_ID

This should contain Remote=no and Active=yes in the output. If it does not, make sure that X runs on the same tty where the login occurred. This is required in order to preserve the logind session.

A D-Bus session should also be started along with X. See D-Bus#Starting the user session for more information on this.

Basic polkit actions do not require further set-up. Some polkit actions require further authentication, even with a local session. A polkit authentication agent needs to be running for this to work. See polkit#Authentication agents for more information on this.

error while loading shared libraries

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: Or the program needs to be rebuilt after a soname bump. (Discuss in Talk:General troubleshooting#)

If, while using a program, you get an error similar to:

error while loading shared libraries: cannot open shared object file: No such file or directory

Use pacman or pkgfile to search for the package that owns the missing library:

$ pacman -Fs
extra/libusb-compat 0.1.5-1

In this case, the libusb-compat package needs to be installed.

The error could also mean that the package that you used to install your program does not list the library as a dependency in its PKGBUILD: if it is an official package, report a bug; if it is an AUR package, report it to the maintainer using its page in the AUR website.

file: could not find any magic files!

Tango-edit-clear.pngThis article or section needs language, wiki syntax or style improvements.Tango-edit-clear.png

Reason: See Help:Style and related articles. (Discuss in Talk:General troubleshooting#)

Example: After an every-day routine update or following the installation of a package you are given the following error:

# file: could not find any magic files!

This will most likely leave your system crippled. And, any attempts made to recompile/reinstall the package(s) responsible for the breakage will fail. Also, any attempts made to try to rebuild the initramfs will result in the following:

# mkinitcpio -p linux
==> Building image from preset: 'default'
 -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
file: could not find any magic files!
==> ERROR: invalid kernel specifier: `/boot/vmlinuz-linux'
==> Building image from preset: 'fallback'
 -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
file: could not find any magic files!
@==> ERROR: invalid kernel specifier: `/boot/vmlinuz-linux'

Typically a previously installed application had placed a configuration file within /etc/ or it had made changes to /etc/ which are now invalid.

  1. Boot into the Arch Linux Live CD / Installation Media.
  2. Mount your root (/) partition to /mnt and using arch-chroot, chroot into your system.
Note: arch-chroot leaves mounting the /boot partition up to the user.
  1. Examine /etc/ and remove any invalid lines found.
  2. Examine the files located inside the directory /etc/ and remove all invalid files.
  3. Rebuild the initramfs.
# mkinitcpio -p linux
  1. Reboot back to your installed system.
  2. Once booted, reinstall the package that was responsible for leaving your system inoperable using:
# pacman -S <package>

See also