Gummiboot is a UEFI boot loader written by Kay Sievers and Harald Hoyer. It is simple to configure, but can only start EFI executables, the Linux kernel (with CONFIG_EFI_STUB enabled), grub.efi, and such.
Installand run the following to install gummiboot as your bootloader:
# gummiboot install
This will automatically copy the gummiboot binary to your EFI System Partition and create a boot entry in the EFI Boot Manager. If you are not booted via EFI, creating the boot entry will fail. You should however still be able to boot gummiboot as it copies the binary to the default EFI binary location on your ESP (
/boot/EFI/Boot/BOOTX64.EFI on x64 systems). Note that the installation process has to be done only once, updating will happen automatically by the post_install script of during package updates.
The basic configuration is kept in
/boot/loader/loader.conf, with just two possible configuration options:
default– default entry to select (without the
.confsuffix); can be a wildcard like
timeout– menu timeout in seconds. If this is not set, the menu will only be shown when you hold the space key while booting.
default arch timeout 4
Note that both options can be changed in the boot menu itself, which will store them as EFI variables.
Adding boot entries
Gummiboot searches for boot menu items in
/boot/loader/entries/*.conf – each file found must contain exactly one boot entry. The possible options are:
title– operating system name. Required.
version– kernel version, shown only when multiple entries with same title exist. Optional.
machine-id– machine identifier from
/etc/machine-id, shown only when multiple entries with same title and version exist. Optional.
efi– EFI program to start, relative to your ESP (
/vmlinuz-linux. Either this or
linux(see below) is required.
options– Command-line options to pass to the EFI program. Optional, but you will need at least
root=devif booting Linux.
For Linux, you can specify
linux path-to-vmlinuz and
initrd path-to-initramfs; this will be automatically translated to
efi path and
options initrd=path – this syntax is only supported for convenience and has no differences in function.
An example entry for Arch Linux:
title Arch Linux linux /vmlinuz-linux initrd /initramfs-linux.img options root=PARTUUID=14420948-2cea-4de7-b042-40f67c618660 rw
You can also add other EFI programs such as
The following keys are used inside the menu:
Up/Down- select entry
Enter- boot the selected entry
d- select the default entry to boot (stored in a non-volatile EFI variable)
t/T- adjust the timeout (stored in a non-volatile EFI variable)
e- edit the kernel command line
v- show the gummiboot and UEFI version
p- print the current configuration
h- show key mapping
These hotkeys will, when pressed inside the menu or during bootup, directly boot a specific entry:
a- OS X
s- EFI Shell
1-9- number of entry
Manual entry using efibootmgr
gummiboot install command failed you can create a EFI boot entry manually with
# efibootmgr -c -w -d /dev/sdX -p Y -l '\EFI\gummiboot\gummibootx64.efi' -L "Gummiboot"