Difference between revisions of "HP Compaq NX6325"
|Line 4:||Line 4:|
The Compaq nx6325
The Compaq nx6325 the BCM4311 or BCM4312 wireless . The b43 drivers that come with the latest kernel will get these to work. The b43-firmware package mustalso be installed from the AUR. Details can be found [https://wiki.archlinux.org/index.php/Broadcom_wireless#b43.2Fb43legacy here]
Revision as of 02:15, 2 December 2011
This article describes specific steps to configure hardware on the notebook model HP Compaq NX6325.
The Compaq nx6325 has the BCM4311 or BCM4312 wireless chipset. The b43 drivers that come with the latest kernel will get these to work. The b43-firmware package must also be installed from the AUR. Details can be found here
Laptop Mode tools with a combination of Cpufreq, acpi and pm-utils will work on this notebook. Thorough installation and configuration instructions for each tool can be found:
A modern Desktop Environment will take care of this Automatically. However to manually enable the multimedia keys (volume up/down/mute), create a file .Xmodmap in your home directory, add the following lines:
keycode 160 = XF86AudioMute keycode 176 = XF86AudioRaiseVolume keycode 174 = XF86AudioLowerVolume
and restart X.
Xorg now automatically takes care of the Xorg configuration. No xorg.conf is needed, however if one is presented it will attempt to load it.
For troubleshooting or setting up a complicated environment, refer to Xorg
Fingerprint, card slots, etc.
The multi-card reader work out-of-the-box with the latest kernel.
The Authentec fingerprint reader works with the installation and configuration of fprint