Difference between revisions of "HP Compaq NX6325"

From ArchWiki
Jump to: navigation, search
(Wireless)
(21 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 +
[[Category:HP]]
 
This article describes specific steps to configure hardware on the notebook model HP Compaq NX6325.
 
This article describes specific steps to configure hardware on the notebook model HP Compaq NX6325.
  
 
=Wireless=
 
=Wireless=
  
The [[Broadcom BCM4312]] driver is available in [[AUR]] and works perfectly. I recommend using [[Wicd]] to configure wireless networking.
+
The Compaq nx6325 has the BCM4311 or BCM4312 wireless chipset. The b43 drivers that come with the latest kernel will get these to work. The b43-firmware package '''must''' also be installed from the AUR. Details can be found [https://wiki.archlinux.org/index.php/Broadcom_wireless#b43.2Fb43legacy here]
  
 
=Power management=
 
=Power management=
 +
'''NOTE''': All and any of these are optional. Laptop Mode Tools and Acpid are ''highly'' advised.
  
Cpufreq, acpi and pm-utils work on this notebook. Please refer to the respective wiki articles on how to configure them:
+
Laptop Mode tools with a combination of Cpufreq, acpi and pm-utils will work on this notebook. Thorough installation and configuration instructions for each tool can be found:
  
* [[CPU Frequency Scaling]]
+
* [[Laptop Mode Tools]]
 +
* [[CPU Frequency Scaling]] (may not be required)
 
* [[Acpid]]
 
* [[Acpid]]
 
* [[Pm-utils]]
 
* [[Pm-utils]]
  
When using ndiswrapper and pm-suspend or pm-hibernate, you need to [[Pm-utils#Creating_your_own_hooks|create a hook]] to unload/load the ndiswrapper module on suspend (otherwise wireless will not work upon resume).
+
=Audio=
  
#!/bin/bash
+
Sound works fine, just follow the [[ALSA]] how-to. For a more complete solution (with greater options) consider installing [[pulseaudio]].
case $1 in
+
    hibernate)
+
        modprobe -r ndiswrapper
+
        ;;
+
    suspend)
+
        modprobe -r ndiswrapper
+
        ;;
+
    thaw)
+
        modprobe ndiswrapper
+
        ;;
+
    resume)
+
        modprobe ndiswrapper
+
        ;;
+
    *) echo "somebody is calling me totally wrong."
+
        ;;
+
esac
+
  
Depending on what method/tool you use to connect wireless networks, you might have to include other commands in the above scripts or manually reconnect to the wireless network.
+
==Multimedia keys==
 +
A modern Desktop Environment will take care of this Automatically.
 +
However to manually enable the multimedia keys (volume up/down/mute), create a file ''.Xmodmap'' in your home directory, add the following lines:
  
=Audio & Video=
+
keycode 160 = XF86AudioMute
 +
keycode 176 = XF86AudioRaiseVolume
 +
keycode 174 = XF86AudioLowerVolume
  
Sound works fine, just follow the [[ALSA]] how-to.
+
and restart X.
  
For 3D graphics, the [[ATI#ATI_Catalyst_proprietary_driver|ATI Catalyst proprietary driver]] works.
+
=Video=
''Please note that I have not tried the open source driver, so it might work''.
+
 
 +
The free [https://wiki.archlinux.org/index.php/ATI xf86-video-driver] driver works perfectly for the Radeon Xpress 200M that ships with the nx6325. The proprietry [[ATI#ATI_Catalyst_proprietary_driver|catalyst]] driver no longer works for this card, support has been dropped.
 +
 
 +
==Xorg.conf==
 +
 
 +
Xorg now automatically takes care of the Xorg configuration. No xorg.conf is needed, however if one is presented it will attempt to load it.  
 +
 
 +
For troubleshooting or setting up a complicated environment, refer to [[Xorg]]
  
 
=Fingerprint, card slots, etc.=
 
=Fingerprint, card slots, etc.=
  
As it is the case with other Linux distributions, the fingerprint reader and the card reader are currently not supported.
+
The multi-card reader work out-of-the-box with the latest kernel.
  
[[Category:Laptops (English)]]
+
The Authentec fingerprint reader works with the installation and configuration of [https://wiki.archlinux.org/index.php/Fprint fprint]
[[Category:HOWTOs (English)]]
+

Revision as of 12:55, 23 April 2012

This article describes specific steps to configure hardware on the notebook model HP Compaq NX6325.

Wireless

The Compaq nx6325 has the BCM4311 or BCM4312 wireless chipset. The b43 drivers that come with the latest kernel will get these to work. The b43-firmware package must also be installed from the AUR. Details can be found here

Power management

NOTE: All and any of these are optional. Laptop Mode Tools and Acpid are highly advised.

Laptop Mode tools with a combination of Cpufreq, acpi and pm-utils will work on this notebook. Thorough installation and configuration instructions for each tool can be found:

Audio

Sound works fine, just follow the ALSA how-to. For a more complete solution (with greater options) consider installing pulseaudio.

Multimedia keys

A modern Desktop Environment will take care of this Automatically. However to manually enable the multimedia keys (volume up/down/mute), create a file .Xmodmap in your home directory, add the following lines:

keycode 160 = XF86AudioMute
keycode 176 = XF86AudioRaiseVolume
keycode 174 = XF86AudioLowerVolume

and restart X.

Video

The free xf86-video-driver driver works perfectly for the Radeon Xpress 200M that ships with the nx6325. The proprietry catalyst driver no longer works for this card, support has been dropped.

Xorg.conf

Xorg now automatically takes care of the Xorg configuration. No xorg.conf is needed, however if one is presented it will attempt to load it.

For troubleshooting or setting up a complicated environment, refer to Xorg

Fingerprint, card slots, etc.

The multi-card reader work out-of-the-box with the latest kernel.

The Authentec fingerprint reader works with the installation and configuration of fprint