Difference between revisions of "HP Compaq nc6220"

From ArchWiki
Jump to navigation Jump to search
(kernel26beyond: out of date)
(Redirect to updated general page.)
(6 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[Category:HP (English)]]
#REDIRECT [[Laptop]]
My plan when I finish is to have my laptop (HP Compaq nc6220) dual booted with Windows XP Pro (work image).  I repartitioned my hard drive with [http://gparted.sourceforge.net/livecd.php Gparted Live CD].  It only took a minute or so.  I will be doing the install with the arch 0.8 beta2 base cd.  There is an [http://archlinux.org/static/docs/arch-install-guide.html installation guide (0.7.2)] that may help.I will do my best to give as much detail as possible.
NOTE:  Per [http://h18000.www1.hp.com/products/quickspecs/12130_na/12130_na.HTML HP's website], this laptop is Novell Linux Desktop 9 certified.  So getting linux on this laptop should not be too hard.
===System Specifications===
HP Compaq nc6220 - Intel Centrino
* Intel Pentium M processor 750 (1.86-GHz, 533-MHz FSB, 2-MB L2 cache)
* Mobile Intel 915GM Express Chipset
* 512-MB 533-MHz DDR2 SDRAM
* 60-GB 5400 rpm IDE ATA Harddrive
* 14.1-inch color TFT SXGA+ (1400 x 1050 resolution and 16 M colors)
* Intel Graphics Media Accelerator 900 with up to 128 MB of shared system memory
* 9.5-mm DVD/CD-RW Combo (Matshita UJDA775 IDE ATA 8x DVD/24x CDRW)
* 56K Fax/Modem
* NetXtreme Gigabit PCI Express Ethernet Controller (10/100/1000 NIC)
* Intel PRO/Wireless 2200BG 802.11b/g WLAN
* One Type I/II PC Card Slot??
* One Integrated Smart Card Reader??
* One Integrated Secure Digital Slot??
* Dual pointing devices (both Pointstick and Touchpad)
* 6-cell high capacity Lithium-Ion (52Wh)
* External 65W adapter
Output of lshwd
00:00.0 Host bridge: Intel Corp.|Mobile Memory Controller Hub (intel-agp)
00:02.0 VGA compatible controller: Intel Corp.|Mobile 915GM/GMS/910GML Express Graphics Controller (i810)
00:02.1 Display controller: Intel Corp.|Mobile Graphics Controller (vesa)
00:1c.0 PCI bridge: Intel Corp.|I/O Controller Hub PCI Express Port 0 (unknown)
00:1c.1 PCI bridge: Intel Corp.|I/O Controller Hub PCI Express Port 1 (unknown)
00:1d.0 USB Controller: Intel Corp.|I/O Controller Hub USB (unknown)
00:1d.1 USB Controller: Intel Corp.|I/O Controller Hub USB (unknown)
00:1d.2 USB Controller: Intel Corp.|I/O Controller Hub USB (unknown)
00:1d.7 USB Controller: Intel Corp.|I/O Controller Hub USB2 (unknown)
00:1e.0 PCI bridge: Intel Corp.|82801 Hub Interface to PCI Bridge (hw_random)
00:1e.2 Multimedia audio controller: Intel Corp.|82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (snd-intel8x0)
00:1e.3 Modem: Intel Corp.|I/OController Hub Modem (Hsf:www.linmodems.org)
00:1f.0 ISA bridge: Intel Corp.|I/O Controller Hub LPC (i810-tco)
00:1f.1 IDE interface: Intel Corp.|I/O Controller Hub PATA (piix)
02:04.0 Network controller: Intel Corp.|Intel(R) PRO/Wireless 2200BG (ipw2200)
02:06.0 CardBus bridge: Texas Instruments|Texas Instruments PCIxx21/x515 Cardbus Controller (yenta_socket)
02:06.3 Mass storage controller: Texas Instruments|Texas Instruments PCIxx21 Integrated FlashMedia Controller (unknown)
02:06.4 : Texas Instruments|Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) C (unknown)
02:06.5 : Texas Instruments|Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Smart Card Controller (unknown)
10:00.0 Ethernet controller: Broadcom Corp.|NetXtreme BCM5751M Gigabit Ethernet PCI Express (tg3)
004:001 USB Hub: Virtual|Hub (unknown)
003:001 USB Hub: Virtual|Hub (unknown)
002:001 USB Hub: Virtual|Hub (unknown)
001:001 USB Hub: Virtual|Hub (unknown)
===What works/What doesn't===
Pretty much everything works on this laptop except the SD-card reader. I am still working on it.  The screen needs a little tweaking to get the full resolution and works great.  Also I have not tried the modem (no POTS line) or tried to suspend the laptop yet.
===Video Driver===
The NC6220 has an onboard Intel 9xx series VGA, supported by the xf86-video-intel driver.
There is a synaptic touchpad on this laptop.  If you follow this [http://wiki.archlinux.org/index.php/Touchpad_Synaptics howto], you should have no problems getting this to work.  It works great for me.
Note:  Make sure you update the modules in /etc/rc.conf.
====Compiz Fusion====
This laptop supports Compiz Fusion.  So I followed the [http://wiki.archlinux.org/index.php/Compiz_fusion wiki], and it worked great.
===Fix Resolution===
xf86-video-i810 used to required 915resolution to get a correct resolution. This isn't needed anymore by the superseeding xf86-video-intel driver.
Section "ServerLayout"
        Identifier    "Xorg Configured"
        Screen      0  "Screen0" 0 0
Section "ServerFlags"
        Option "AllowMouseOpenFail"  "true"
Section "Monitor"
        Identifier "Monitor0"
                Option "DPMS" "true"
        HorizSync    28.0 - 96.0 # Warning: This may fry old Monitors
        VertRefresh  50.0 - 75.0 # Very conservative. May flicker.
        # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
        ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
Section "Device"
        Identifier  "Card0"
        Driver      "i810"
        VendorName  "Intel Corp."
        BoardName  "Unknown Board"
        Option      "XAANoOffscreenPixmaps" "true"
        Option      "DRI" "true"
Section "Screen"
        Identifier "Screen0"
        Device    "Card0"
        Monitor    "Monitor0"
        DefaultColorDepth 24
        SubSection "Display"
                Depth    24
                Modes "1400x1050"
See [[ALSA]].
== Network ==
=== Wired ===
The wired connection worked out of the box.  The Neworkmanager, that we will setup in the next section, will manage this as well as the wireless.
=== Wireless ===
To enable the blue wireless LED, add the following to /etc/modprobe.d/modprobe.conf:
options ipw2200 led=1
==== Troubles with wireless ====
The default bios settings maximize power savings by only allowing either power to be given to the wireless card or the ethernet card. Either disable the "LAN/WLAN Switching" in the bios, eject the "tg3" module when you want to use the wireless card, or unplug the ethernet cable.
=== Modem ===
Have not tried.
== Card Readers ==
=== PCMCIA ===
As far as I've understood from other reports, the pcmcia card works as expected. I don't have one at this time, so I can't confirm it.
=== Compact Flash ===
The same goes for the Compact Flash. It's supposed to work as it uses the same interfaces as the PCMCIA does, but I can't confirm anything since I don't have a CF-card.
=== Secure Digital ===
The SD-card reader on the other hand is a pain! It uses proprietary drivers from ricoh under windows and there are no drivers under linux. I would really want this working but I think the only chance would be to reverse engineer the reader and I guess not enough coders have this device. Subsequently, there are no drivers now and there won't be in the foreseeable future...
==Other Tweaks==
I like to use sudo to manage my system.  So as root, I do a:
# pacman -S sudo
Then I do a give myself rights:
# visudo -f /etc/sudoers
Add myself under root.
I disabled the IPV6 module because I do not need it.  Here is the [http://wiki.archlinux.org/index.php/IPv6_-_Disabling_the_Module howto] to get this.
To connect to other shares and doing updates I use SSHfs.  Here is a [http://wiki.archlinux.org/index.php/Sshfs howto] for that.
jre # Java
===Files Edited===
= External Links =
* This report is listed at the [http://tuxmobil.org/fujitsu.html TuxMobil: Linux Laptop and Notebook Installation Guides Survey: Fujitsu-Siemens - FSC].

Latest revision as of 09:57, 8 May 2015

Redirect to: