HP Compaq nc6220
- 1 Introduction
- 2 Installation
- 3 Post Installation
- 4 Xorg
- 5 Audio
- 6 Network
- 7 ACPI
- 8 Card Readers
- 9 Other Tweaks
- 10 External Links
My plan when I finish is to have my laptop (HP Compaq nc6220) dual booted with Windows XP Pro (work image). I repartitioned my hard drive with Gparted Live CD. It only took a minute or so. I will be doing the install with the arch 0.8 beta2 base cd. There is an installation guide (0.7.2) that may help.I will do my best to give as much detail as possible.
NOTE: Per HP's website, this laptop is Novell Linux Desktop 9 certified. So getting linux on this laptop should not be too hard.
HP Compaq nc6220 - Intel Centrino
- Intel Pentium M processor 750 (1.86-GHz, 533-MHz FSB, 2-MB L2 cache)
- Mobile Intel 915GM Express Chipset
- 512-MB 533-MHz DDR2 SDRAM
- 60-GB 5400 rpm IDE ATA Harddrive
- 14.1-inch color TFT SXGA+ (1400 x 1050 resolution and 16 M colors)
- Intel Graphics Media Accelerator 900 with up to 128 MB of shared system memory
- ADI AC '97 CODEC
- 9.5-mm DVD/CD-RW Combo (Matshita UJDA775 IDE ATA 8x DVD/24x CDRW)
- 56K Fax/Modem
- NetXtreme Gigabit PCI Express Ethernet Controller (10/100/1000 NIC)
- Intel PRO/Wireless 2200BG 802.11b/g WLAN
- One Type I/II PC Card Slot??
- One Integrated Smart Card Reader??
- One Integrated Secure Digital Slot??
- Dual pointing devices (both Pointstick and Touchpad)
- 6-cell high capacity Lithium-Ion (52Wh)
- External 65W adapter
Output of lshwd
00:00.0 Host bridge: Intel Corp.|Mobile Memory Controller Hub (intel-agp) 00:02.0 VGA compatible controller: Intel Corp.|Mobile 915GM/GMS/910GML Express Graphics Controller (i810) 00:02.1 Display controller: Intel Corp.|Mobile Graphics Controller (vesa) 00:1c.0 PCI bridge: Intel Corp.|I/O Controller Hub PCI Express Port 0 (unknown) 00:1c.1 PCI bridge: Intel Corp.|I/O Controller Hub PCI Express Port 1 (unknown) 00:1d.0 USB Controller: Intel Corp.|I/O Controller Hub USB (unknown) 00:1d.1 USB Controller: Intel Corp.|I/O Controller Hub USB (unknown) 00:1d.2 USB Controller: Intel Corp.|I/O Controller Hub USB (unknown) 00:1d.7 USB Controller: Intel Corp.|I/O Controller Hub USB2 (unknown) 00:1e.0 PCI bridge: Intel Corp.|82801 Hub Interface to PCI Bridge (hw_random) 00:1e.2 Multimedia audio controller: Intel Corp.|82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (snd-intel8x0) 00:1e.3 Modem: Intel Corp.|I/OController Hub Modem (Hsf:www.linmodems.org) 00:1f.0 ISA bridge: Intel Corp.|I/O Controller Hub LPC (i810-tco) 00:1f.1 IDE interface: Intel Corp.|I/O Controller Hub PATA (piix) 02:04.0 Network controller: Intel Corp.|Intel(R) PRO/Wireless 2200BG (ipw2200) 02:06.0 CardBus bridge: Texas Instruments|Texas Instruments PCIxx21/x515 Cardbus Controller (yenta_socket) 02:06.3 Mass storage controller: Texas Instruments|Texas Instruments PCIxx21 Integrated FlashMedia Controller (unknown) 02:06.4 : Texas Instruments|Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) C (unknown) 02:06.5 : Texas Instruments|Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Smart Card Controller (unknown) 10:00.0 Ethernet controller: Broadcom Corp.|NetXtreme BCM5751M Gigabit Ethernet PCI Express (tg3) 004:001 USB Hub: Virtual|Hub (unknown) 003:001 USB Hub: Virtual|Hub (unknown) 002:001 USB Hub: Virtual|Hub (unknown) 001:001 USB Hub: Virtual|Hub (unknown)
What works/What doesn't
Pretty much everything works on this laptop except the SD-card reader. I am still working on it. The screen needs a little tweaking to get the full resolution and works great. Also I have not tried the modem (no POTS line) or tried to suspend the laptop yet.
Boot from the CD and do the base installation from the CD. My partitions are setup as follows:
HDA1 20gb Win XP HDA5 32mb /boot HDA6 1gb swap (needed for hibernate mode...I think) HDA7 39gb /
With Windows XP as an option, the grub boot loader should look something like this:
# Windows XP title Microsoft Windows XP Professional rootnoverify (hd0,0) makeactive chainloader +1 # (0) Arch Linux title Arch Linux root (hd0,4) kernel /vmlinuz26 root=/dev/sda7 ro initrd /kernel26.img # (1) Arch Linux title Arch Linux Fallback root (hd0,4) kernel /vmlinuz26 root=/dev/sda7 ro initrd /kernel26-fallback.img
First, create your user account:
#useradd -m <user>
Add yourself to some needed group:
#gpasswd -a <user> audio; gpasswd -a <user> optical; gpasswd -a <user> storage; gpasswd -a <user> users
Next is to upgrade:
The NC6220 has an onboard Intel 9xx series VGA, supported by the xf86-video-intel driver.
There is a synaptic touchpad on this laptop. If you follow this howto, you should have no problems getting this to work. It works great for me. Note: Make sure you update the modules in /etc/rc.conf.
This laptop supports Compiz Fusion. So I followed the wiki, and it worked great.
xf86-video-i810 used to required 915resolution to get a correct resolution. This isn't needed anymore by the superseeding xf86-video-intel driver.
Section "ServerLayout" Identifier "Xorg Configured" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Touchpad" "SendCoreEvents" Option "AIGLX" "true" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/PEX" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/ttf/western" FontPath "/usr/share/fonts/ttf/decoratives" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/truetype/openoffice" FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" FontPath "/usr/share/fonts/latex-ttf-fonts" FontPath "/usr/share/fonts/defoma/CID" FontPath "/usr/share/fonts/defoma/TrueType" EndSection Section "Module" Load "ddc" # ddc probing of monitor Load "dbe" Load "dri" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "type1" Load "freetype" Load "record" Load "synaptics" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "" Option "XkbVariant" "" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection Section "InputDevice" Identifier "Touchpad" Driver "synaptics" Option "Device" "/dev/input/mouse1" Option "Protocol" "auto-dev" Option "LeftEdge" "1700" Option "RightEdge" "5300" Option "TopEdge" "1700" Option "BottomEdge" "4200" Option "FingerLow" "25" Option "FingerHigh" "30" Option "MaxTapTime" "180" Option "MaxTapMove" "220" Option "VertScrollDelta" "100" Option "MinSpeed" "0.06" Option "MaxSpeed" "0.12" Option "AccelFactor" "0.0010" Option "SHMConfig" "true" EndSection Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors VertRefresh 50.0 - 75.0 # Very conservative. May flicker. # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync EndSection Section "Device" Identifier "Card0" Driver "i810" VendorName "Intel Corp." BoardName "Unknown Board" Option "XAANoOffscreenPixmaps" "true" Option "DRI" "true" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 24 SubSection "Display" Depth 24 Modes "1400x1050" EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection
Now for the sound. It works out of the box, but alsa needs to be installed for saving sound setting and all the other good stuff alsa does. Thankfully there is a howto here.
The wired connection worked out of the box. The Neworkmanager, that we will setup in the next section, will manage this as well as the wireless.
To enable the blue wireless LED, add the following to /etc/modprobe.conf: [code] options ipw2200 led=1 [/code]
Troubles with wireless
It appears the NC6220 can come with a "restricted" ethernet controller. If for some reason you can't get the wireless working, try unplugging the ethernet adaptor. Symptoms are: sending commands to the wireless fails (for example: ipw2200: Failed to send POWER_MODE: Command timed out), the kernel complains about the "Radio Frequency Kill Switch is On".
Have not tried.
When I login to gnome, I keep getting a acpi did not load error. I installed:
pacman -Sy acpid gnome-power-manager
And I added the daemons in the /etc/rc.conf file
And rebooted. Now I have the battery monitor to the gnome panel and life is good.
As far as I've understood from other reports, the pcmcia card works as expected. I don't have one at this time, so I can't confirm it.
The same goes for the Compact Flash. It's supposed to work as it uses the same interfaces as the PCMCIA does, but I can't confirm anything since I don't have a CF-card.
The SD-card reader on the other hand is a pain! It uses proprietary drivers from ricoh under windows and there are no drivers under linux. I would really want this working but I think the only chance would be to reverse engineer the reader and I guess not enough coders have this device. Subsequently, there are no drivers now and there won't be in the foreseeable future...
# pacman -Sy kernel26beyond
Now add the following to the boot loader. For me, it is grub:
# (0) Arch Linux title Arch Linux root (hd0,4) kernel /vmlinuz26beyond root=/dev/sda7 ro initrd /kernel26beyond.img # (1) Arch Linux title Arch Linux Fallback root (hd0,4) kernel /vmlinuz26beyond root=/dev/sda7 ro initrd /kernel26beyond-fallback.img
I like to use sudo to manage my system. So as root, I do a:
# pacman -Sy sudo
Then I do a give myself rights:
# visudo -f /etc/sudoers
Add myself under root.
I disabled the IPV6 module because I do not need it. Here is the howto to get this.
To connect to other shares and doing updates I use SSHfs. Here is a howto for that.
affinity firefox thunderbird flashplugin flashplayer-standalone jre # Java mplayer vlc Glipper tomboy gaim ms-fonts ntp tracker affinity f-spot
rc.local rc.conf pacman.conf modprobe.conf inittab xorg.conf sudoers
- This report is listed at the TuxMobil: Linux Laptop and Notebook Installation Guides Survey: Fujitsu-Siemens - FSC.