Difference between revisions of "HP Mini 5101"

From ArchWiki
Jump to: navigation, search
(Hardware)
(Broadcom (Wireless) Driver)
Line 18: Line 18:
 
==== Broadcom (Wireless) Driver ====
 
==== Broadcom (Wireless) Driver ====
  
$ lspci -vnn | grep Broadcom
+
See [[Broadcom_wireless]] for setup infrmation.
08:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g ['''14e4:4354'''] (rev 01)
+
 
''OR''
+
== brcmsmac ==
08:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g ['''14e4:4315'''] (rev 01)
+
Works best but the red/blue led isn't working.
 +
 
 +
== broadcom-wl ==
 +
Needs to be compiled newly from the AUR ([http://aur.archlinux.org/packages.php?ID=31449 broadcom-wifi-builder] or [http://aur.archlinux.org/packages.php?ID=19514 broadcom-wl]) after each kernel upgrade.
  
Using [http://aur.archlinux.org/packages.php?ID=31449 broadcom-wifi-builder] or [http://aur.archlinux.org/packages.php?ID=19514 broadcom-wl] from AUR will do the trick. See also [[Broadcom_BCM43XX]].
 
  
 
It may be necessary to load the driver manually:
 
It may be necessary to load the driver manually:

Revision as of 09:40, 29 July 2011

Hardware

Video

Install xf86-video-intel or xf86-video-intel-newest. Make sure to configure KMS correctly.

Audio

Typical Intel HD Audio. Just follow ALSA.

Make sure you have the latest version of alsa-utils, alsa-lib and alsa-firmware.

Network

Swapping eth0/eth1 can confuse Wicd, assigning static names helps.

Broadcom (Wireless) Driver

See Broadcom_wireless for setup infrmation.

brcmsmac

Works best but the red/blue led isn't working.

broadcom-wl

Needs to be compiled newly from the AUR (broadcom-wifi-builder or broadcom-wl) after each kernel upgrade.


It may be necessary to load the driver manually: Template:File

Suspending Problems

Problem with reconnecting after suspending:

Template:File

b43

14e4:4315 is now supported by b43 (kernel26 > 2.6.32). So, you can use it instead of the wl driver.

But careful, 14e4:4354 is not supported.

Bluetooth

See: Bluetooth

Touchpad

Works out of the box.

Webcam

Works out of the box.

ACPI

Suspend on Lid

This here works quite fine: Suspend to RAM#Automatic Suspend, the Hard Way

It might be necessary to use "/etc/acpi/events/lm_lid" instead of "/etc/acpi/events/lid". (laptop-mode?)

Just change the "LID" to it's actual value. For me it was C1D0.

Template:File

Power Button

http://wiki.archlinux.org/index.php/Shutting_system_down_by_pressing_the_power_button

Hotkeys

Display toggle

http://wiki.archlinux.org/index.php/ACPI_hotkeys

# acpi_listen
(Press fn+f2)
video C088 00000080 00000000

So we have to edit

/etc/acpi/handler.sh

like this Template:File

Hard disk shock protection

Shock protection for HP/Compaq laptops https://wiki.archlinux.org/index.php/Laptop#Hard_disk_shock_protection

Mute, browser button, volume down, etc...

http://wiki.archlinux.org/index.php/Extra_Keyboard_Keys