Difference between revisions of "HP Mini 5101"

From ArchWiki
Jump to: navigation, search
(Network)
m
Line 1: Line 1:
[[Category:Laptops (English)]]
+
[[Category:Laptops (English)]][[Category:Getting and installing Arch (English)]][[Category:HOWTOs (English)]]
[[Category:Getting and installing Arch (English)]]
+
== Hardware ==
[[Category:HOWTOs (English)]]
+
 
 +
=== Video ===
  
==Hardware==
 
===Video===
 
 
Intel stable drivers ([http://aur.archlinux.org/packages.php?ID=28184 xf86-video-intel-stable]) from AUR will give you 250-290 FPS on glxgears.
 
Intel stable drivers ([http://aur.archlinux.org/packages.php?ID=28184 xf86-video-intel-stable]) from AUR will give you 250-290 FPS on glxgears.
  
===Audio===
+
=== Audio ===
 +
 
 
Typical Intel HD Audio. Just follow [http://wiki.archlinux.org/index.php/ALSA alsa setup].
 
Typical Intel HD Audio. Just follow [http://wiki.archlinux.org/index.php/ALSA alsa setup].
  
 
Make sure you have the latest version of alsa-utils, alsa-lib and alsa-firmware.
 
Make sure you have the latest version of alsa-utils, alsa-lib and alsa-firmware.
  
===Touchpad===
+
=== Touchpad ===
  
 
Works out of the box. (Guess it's because of HAL)
 
Works out of the box. (Guess it's because of HAL)
  
===Network===
+
=== Network ===
 +
 
 
Swapping eth0/eth1 can confuse [[Wicd]], assigning static names [http://wiki.archlinux.org/index.php/Udev#Mixed_Up_Devices.2C_Sound.2FNetwork_Cards_Changing_Order_Each_Boot helps].
 
Swapping eth0/eth1 can confuse [[Wicd]], assigning static names [http://wiki.archlinux.org/index.php/Udev#Mixed_Up_Devices.2C_Sound.2FNetwork_Cards_Changing_Order_Each_Boot helps].
  
====Broadcom (Wireless) Driver====
+
==== Broadcom (Wireless) Driver ====
  [user@mini ~]$ lspci | grep Broadcom
+
 
 +
  $ lspci | grep Broadcom
 
  08:00.0 Network controller: Broadcom Corporation Device 4353 (rev 01)
 
  08:00.0 Network controller: Broadcom Corporation Device 4353 (rev 01)
  
Line 29: Line 31:
 
  }}
 
  }}
  
===ACPI===
+
=== ACPI ===
====Suspend on Lid====
+
  
This here works quite fine: http://wiki.archlinux.org/index.php/Suspend_to_RAM#Automatic_Suspend.2C_the_Hard_Way
+
==== Suspend on Lid ====
  
It might be necessary to use "/etc/acpi/events/lm_lid" instead of "/etc/acpi/events/lid". (laptop-mode?)
+
This here works quite fine: [[Suspend to RAM:Automatic Suspend, the Hard Way]]
  
 +
It might be necessary to use "/etc/acpi/events/lm_lid" instead of "/etc/acpi/events/lid". (laptop-mode?)
  
 
Just change the "LID" to it's actual value. For me it was C1D0.
 
Just change the "LID" to it's actual value. For me it was C1D0.
Line 42: Line 44:
 
if grep closed /proc/acpi/button/lid/</nowiki>'''C1D0'''<nowiki>/state >/dev/null ; then </nowiki>}}
 
if grep closed /proc/acpi/button/lid/</nowiki>'''C1D0'''<nowiki>/state >/dev/null ; then </nowiki>}}
  
====Power Button====
+
==== Power Button ====
 +
 
 
http://wiki.archlinux.org/index.php/Shutting_system_down_by_pressing_the_power_button
 
http://wiki.archlinux.org/index.php/Shutting_system_down_by_pressing_the_power_button

Revision as of 04:25, 19 October 2009

Hardware

Video

Intel stable drivers (xf86-video-intel-stable) from AUR will give you 250-290 FPS on glxgears.

Audio

Typical Intel HD Audio. Just follow alsa setup.

Make sure you have the latest version of alsa-utils, alsa-lib and alsa-firmware.

Touchpad

Works out of the box. (Guess it's because of HAL)

Network

Swapping eth0/eth1 can confuse Wicd, assigning static names helps.

Broadcom (Wireless) Driver

$ lspci | grep Broadcom
08:00.0 Network controller: Broadcom Corporation Device 4353 (rev 01)

Using broadcom-wl from AUR will do the trick.

It may be necessary to load the driver manually: Template:File

ACPI

Suspend on Lid

This here works quite fine: Suspend to RAM:Automatic Suspend, the Hard Way

It might be necessary to use "/etc/acpi/events/lm_lid" instead of "/etc/acpi/events/lid". (laptop-mode?)

Just change the "LID" to it's actual value. For me it was C1D0.

Template:File

Power Button

http://wiki.archlinux.org/index.php/Shutting_system_down_by_pressing_the_power_button