Difference between revisions of "HP Photosmart 2575"

From ArchWiki
Jump to: navigation, search
m (Install foomatic and cups packages: cups -> cupsd)
Line 1: Line 1:
[[Category:Printers (English)]]
==Choosing connection method==
==Choosing connection method==

Revision as of 13:28, 23 April 2012

Choosing connection method

Determine method for connecting device. In my case I installed it over the network (192.168.50:9100) because I wanted other computers to be able to use it on my network without needing to set up all kinds of things for printer sharing from linux to linux and linux to windows. If you are connecting via USB then follow the instructions regarding USB printers on CUPS first.

Setup method with hplip

Determine the printer IP address. In this example will be used. Install hplip, all other required packages are selected as dependencies, including cups, foomatic-db, foomatic-db-hpijs, foomatic-db-engine and sane.

# pacman -S hplip
# hp-setup

In dialogs from hp-setup you can leave the defaults. The model in printer name is by default set to 2570 and you can rename it to 2575 if you want to. After hp-setup is finished, both printer and scanner should work. It is probably wise to ensure your printer/scanner always has this same IP address, you can set this in your router DHCP server settings or set the printer to static IP address via its web interface.

If hp-setup ask for qt4 and you don’t want to install it. Just try to add the « -i » option to hp-setup.

Optionally install pyqt for graphical frontend before you run hp-setup and to enable HP Device Manager for monitoring and controlling your printer/scanner after install. In this case, you will also have to allow temporal usage of your X session for other users, namely for root:

$ xhost +localhost
$ su
# pacman -S pyqt3
# hp-setup
# exit
$ xhost -localhost

Setup method without hplip

Install foomatic and cups packages

The following packages will need to be installed: foomatic-db-engine foomatic-db-ppd foomatic-filters cups

# pacman -S foomatic-db-engine foomatic-db-ppd foomatic-filters cups
After installing packages, start the CUPS daemon by running
# /etc/rc.d/cupsd start

Restart CUPS if the foomatic packages weren't installed and CUPS was already installed and running.

Configure the printer in CUPS

Download the HP-PhotoSmart_2570-hpijs.ppd and save to a place you can access easily.

If you use KDE, I recommend using its interface. Run

$ kcmshell printers
and go through the dialog. You can also access the dialog by running
$ kprinter
and clicking the wand that says "Add printer..."

If you prefer, go through the CUPS configurator. This doesn't do quite as much probing, but will get the job done. If you need your printer's IP address, on the printer itself, hit setup, Network, View Network Settings, Display Wired Summary. The port should be TCP 9100.

Testing and troubleshooting

If you installed everything the test page should print correctly and you are good to go!

Test scanner with:

$ scanimage -L

You should get output like:

device `hpaio:/net/Photosmart_2570_series?ip=' is a Hewlett-Packard Photosmart_2570_series all-in-one

If only root can find scanner, make sure you are member of scanner group. If even root cannot find it, make sure hpaio is enabled (not commented out) in /etc/sane.d/dll.conf

--Erroneous 01:06, 19 February 2007 (EST)