HP TC1100

From ArchWiki
Revision as of 17:22, 29 July 2012 by Dmmikolajczyk (Talk | contribs) (Stylus Buttons)

Jump to: navigation, search

The TC 1100 is a slate tablet PC with a 10.2" screen and detachable keyboard.

Booting

Since the tablet has no internal cd-rom, booting from USB is the only option for getting into the installation media.

USB Key

Note: I was unable to get the tablet to boot from a USB key. Use USB CD-Rom if posible

USB CD/DVD Rom

  1. Plugin a USB CD-Rom drive with installation disk
  2. Attach keyboard (USB or Dock are fine)
  3. Boot computer
  4. While in BIOS post screen, press the "jog-dial" located on the top left edge
  5. Select "CD-Rom" and press jog-dial again

Installation

Installation is the same as with any laptop. I recommend following the Beginners' Guide

Post Install

For additional tablet related information, please read the [Tablet PC] page.

Graphics

Nouveau works fine, including the 3D support

Power

Install and setup the following

Stylus

Install the xf86-input-wacom package. A reboot may be required for Xorg to recognize the serial digitizer For additional help, see the Wacom page.

Wireless

TODO

Stylus Buttons

I've done a quick and dirty hack of xf86-input-wacom to get the stylus-activated buttons working.

Unpack it, build it using makepkg, and install the resulting package with pacman. The stylus buttons will now generate keycodes when triggered, and these can be bound to actions by either your window manager or xbindkeys. The specific keycodes are as follows:

Button Keycode
Rotate KEY_DIRECTION (161)
Journal Launch KEY_PROG3 (210)
Tablet PC Input Panel Launch KEY_PROG4 (211)

Right Hand Buttons

Side buttons work out of the box. Sometimes they do not respond until the unit is put into standby and then resumed

Screen

TODO

Recommended Tablet-related Applications

Input

  • cellwriter
  • dasher

References

Alternative Install Guides:

General TC1000/TC110 resources: