HP Zbook Studio G3

From ArchWiki
Revision as of 10:25, 26 September 2016 by Gogodidi (talk | contribs) (Initial. Machine specific installation/configuration information.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The HP Zbook Studio G3 is a workstation replacement laptop.

Installation

Installation is quite straight forward. However, you may need to disable the nouveau driver. After this, follow the general instructions of the [guide]

Due to the high screen resolution if this machine, you may want to change the font of your terminal during installation:

# setfont sun12x22

Disabling the nouveau driver

If you experience problems with loading/unloading kernel modules, and, characteristically lspci never completes, you may need to disable the nouveau driver. The Nouveau driver for the NVIDIA Quatro 1000M graphics card is loaded by default, but it does not always work. Therefore, before installation, you need to blacklist the kernel at boot. Edit the kernel boot parameters to disable this module from being loaded (this can be done in the GRUB menu by pressing 'e'):

# modprobe.blacklist=nouveau

After installation, you may want to blacklist it permanently:

/etc/modprobe.d/nonouveau.conf
#Do not load the nouveau driver
blacklist nouveau

Configuration

HiDPI configuration

If you are using a desktop environments such as gnome or KDE, they should have their own management tools. If you are using more power-user type window managers such as i3, you may need to add the following line in your .xinitrc file

~/.xinitrc
xrdb -merge ~/.Xresources
xrandr --output eDP-1 --dpi 220
exec i3