HP Zbook Studio G3
The HP Zbook Studio G3 is a workstation replacement laptop.
Installation is generally pretty straight forward, however, there are some things to consider. Follow the general instructions of the installation|guide
Using hybrid graphics
Disabling Hybrid graphics
If you do not mind greatly reducing your battery life and would like to use the NVIDIA graphics by default, you can change Hybrid graphisc in the firmware setup.
In the BIOS settings, (which you enter by pressing Escape during boot) change the graphics mode from Auto/Hybrid to discrete.
Font size during installation
Due to the high screen resolution if this machine, you may want to change the font of your terminal during installation:
# setfont sun12x22
Dual boot with windows
This laptop usually comes pre-loaded with windows 7. Although the laptop boots in UEFI mode, it appears as though the Windows bootloader is present in the MBR of the hard drive (there is no EFI system partition). It may be wise to install Arch with an MBR bootloader if you wish to preserve the windows installation.
If you are using a desktop environments such as gnome or KDE, they should have their own management tools. If you are using more power-user type window managers such as i3, you may need to add the following line in your .xinitrc file
xrdb -merge ~/.Xresources xrandr --output eDP-1 --dpi 288 exec i3
The name of the output device depends on the graphics adapter and driver. Use xrandr to find out the actual name.
The touchpad may be "hijacked" by the
i2c_hid device driver. Although the touchpad is working, its configuration is fixed to two buttons, two-finger natural scrolling and no tapping; Any changes with
xinput or other tools will have no effect.
blacklist i2c_hid install i2c_hid /bin/false
After a reboot (unloading
i2c_hid, if possible, may be sufficient) the touchpad should be fully configurable libinput device.
To fix the mute button LED, create a file
options snd-hda-intel model=mute-led-gpio